Free USGBC LEED-Green-Associate Practice Exam with Questions & Answers | Set: 2

The Energy and Atmosphere (EA) category addresses the energy performance, efficiency, and renewable sources of buildings. One of the credits in this category is EA Credit: Enhanced Refrigerant Management, which aims to reduce the emissions of ozone-depleting substances and greenhouse gases from refrigeration and air-conditioning equipment. Refrigerants are substances that are used to transfer heat in cooling systems. Some refrigerants have high global warming potential (GWP) and ozone depletion potential (ODP), which means they can contribute to climate change and damage the ozone layer if they leak or are improperly disposed of. Enhanced refrigerant management involves selecting refrigerants with low GWP and ODP, minimizing refrigerant charge size, and preventing or detecting leaks12. References: LEED v4 Green Associate Candidate Handbook1, LEED v4 BD+C Reference Guide2

ASHRAE stands for the American Society of Heating, Refrigerating and Air-Conditioning Engineers, a professional organization that develops standards and guidelines for the design, operation, and maintenance of buildings. ASHRAE standards are applicable to two LEED categories: Energy and Atmosphere (EA) and Indoor Environmental Quality (IEQ). The EA category addresses the energy performance, efficiency, and renewable sources of buildings. The IEQ category addresses the indoor air quality, thermal comfort, lighting quality, and acoustic performance of buildings. Some of the ASHRAE standards that are relevant for these categories are: ASHRAE Standard 90.1 for energy efficiency;ASHRAE Standard 62.1 for ventilation; ASHRAE Standard 55 for thermal comfort; ASHRAE Standard 189.1 for high-performance green buildings1 . References: LEED v4 Green Associate Candidate Handbook1, ASHRAE’s Standards & Guidelines

Daylighting falls under the Indoor Environmental Quality category. LEED awards points for strategies that enhance natural light to improve occupant comfort and reduce energy consumption​​.

Shielded light fixtures are designed to direct light downwards and prevent it from spilling over into areas where it’s not wanted, such as beyond the project boundary. This helps to prevent light trespass, which can be a form of pollution that disrupts ecosystems and human sleep patterns. References: LEED Green Associate Candidate Handbook, U.S. Green Building Council resources

The LEED credit weightings are based on the impact categories defined and established by the USGBC, which is the organization that developed and administers the LEED rating system. The impact categories are aligned with the USGBC’s mission and vision of transforming the built environment to enhance environmental and human health. The impact categories are also informed by the Environmental Protection Agency’s (EPA) Tools for the Reduction and Assessment of Chemical and Other Environmental Impacts (TRACI) methodology, which provides a framework for assessing environmental impacts across different categories. References: LEED Link: Impact categories, section “LEED v4 impact categories”; LEED v4 Impact Category and Point Allocation Process Overview, page 1; LEED Green Associate Candidate Handbook, page 14

Integrative process is a collaborative approach that involves all project stakeholders in the design and decision-making process from the beginning to the end of a project. It aims to optimize the performance, environmental, social, and economic outcomes of a project by considering the interrelationships and synergies between various building and site systems. One of the key aspects of integrative process is to establish feedback loops that allow for continuous monitoring, evaluation, and improvement of the project performance during its operation. Therefore, option C is an example of integrative process, while the other options are not directly related to it. References: Integrative process | U.S. Green Building Council, section “Integrative Process”; Understanding Integrative Design in LEED v4, page 1; LEED Integrative Process Credit Explained, section “INTEGRATIVE PROCESS V4 CREDIT OVERVIEW”

Rainwater is the type of water that would be most useful for landscape irrigation when considering water conservation and water efficient landscaping. Rainwater is water that falls from the sky as precipitation, and it can be collected and stored in tanks, barrels, cisterns, or ponds for later use1. Rainwater is a renewable and free source of water that does not require any treatment or pumping, unlike potable water, which is water that is safe for human consumption and often comes from municipal sources2. Potable water is a scarce and valuable resource that should be conserved for drinking,cooking, and hygiene purposes, rather than for irrigation2. Clean water is a vague term that can refer to any water that is free of contaminants, but it does not necessarily mean that it is potable or suitable for irrigation3. Blackwater is water that contains human or animal waste, such as sewage or toilet water, and it poses a health and environmental risk if used for irrigation without proper treatment4. Therefore, rainwater is the best option for landscape irrigation, as it reduces the demand for potable water, lowers the utility bills, and benefits the plants and soil1.

Rainwater Harvesting for Landscape Irrigation

Potable Water

Clean Water

Blackwater

Building and material reuse contribute to the sustainability goals of a project by reducing the use of raw materials, which can save energy, water, and natural resources, as well as reduce greenhouse gas emissions, waste generation, and environmental impacts. By reusing existing buildings or materials, project teams can avoid the extraction, processing, transportation, and disposal of new materials, which can have significant environmental and social costs. LEED v4.1 recognizes and rewards multiple strategies for building and material reuse in the Building-Life Cycle Impact Reduction credit1.

Prerequisites and credits are the two types of requirements that make up the LEED rating system. Prerequisites are the basic elements or strategies that must be included in any LEED certified project, regardless of the rating system or the level of certification1. Credits are the additional elements or strategies that can be included in a LEED project to achieve higher levels of performance and certification1. Credits are optional and have different point values depending on their environmental benefits and impacts2. Therefore, the correct answer is B. Prerequisites are mandatory and credits are optional.

LEED v4 | U.S. Green Building Council

LEED credit library | U.S. Green Building Council

Placing grilles, grates or mats at all major entrances is an example of permanent entryway systems used to reduce dust, dirt and contaminants brought into a facility. Permanent entryway systems are designed to capture dirt and particulates from people’s shoes and prevent them from entering the indoor environment. This improves the indoor air quality and reduces the need for cleaning and maintenance. The LEED Green Associate Candidate Handbook states that one of the strategies for achieving indoor environmental quality is to “use permanent entryway systems (grilles, grates, mats) to reduce particulate matter being brought into buildings at regular entryways” [1, p. 16]. References: LEED Green Associate Candidate Handbook, [Indoor Environmental Quality | U.S. Green Building Council]