Free USGBC LEED-Green-Associate Practice Exam with Questions & Answers | Set: 13

The Sustainable Sites (SS) category addresses the site selection, design, construction, and operation of a project, as well as its impacts on the natural and built environment. One of the goals of this category is to reduce light pollution and discourage the development of previously undeveloped land. Light pollution is the excessive or inappropriate use of artificial lighting that can have adverse effects on human health, wildlife, ecosystems, and astronomy. Previously undeveloped land is land that has not been graded, cleared, or built upon prior to the current project and remains in a natural state. Developingpreviouslyundeveloped land can result in habitat loss, soil erosion, stormwater runoff, and increased infrastructure costs13. References: LEED v4 Green Associate Candidate Handbook1, LEED v4 BD+C Reference Guide3

Retrocommissioning is a process applied to existing buildings to ensure that they continue to perform optimally for the current use. This process involves checking systems to see if they function as intended, making necessary repairs or improvements, and ensuring that building staff are trained in the operation and maintenance of systems. References: LEED Green Associate Candidate Handbook, U.S. Green Building Council resources

Selection of low-emitting materials is the correct answer because LEED Indoor Environmental Quality addresses pollutants that can affect indoor air quality and occupant health. Materials with high VOC content, added formaldehyde, or harmful chemical emissions can off-gas into interior spaces and cause irritation, odor, discomfort, or health concerns. Low-emitting materials credits encourage products such as compliant paints, adhesives, sealants, flooring, insulation, furniture, and composite wood with no added formaldehyde resins where applicable. Salvaged materials may reduce resource impacts, but they do not automatically guarantee low emissions. Low carbon materials address embodied carbon, mainly a Materials and Resources concern. Lowest first cost is not a LEED health-based material selection strategy.

According to the Indoor Environmental Quality credit category of LEED, mechanical and electrical rooms are considered unoccupied spaces. These spaces are typically not intended for human occupancy, except for maintenance or operational purposes, and therefore do not require the same level of environmental control (such as ventilation or temperature control) as occupied spaces. References: LEED Green Associate Candidate Handbook, U.S. Green Building Council resources

The footprint of a building is the area of ground that it covers, defined by its perimeter. It’s essentially the shape that results when you trace around the outer walls of a building plan. This term is used in architecture and urban planning to describe the space that a building occupies on a site. References: LEED Green Associate Candidate Handbook, U.S. Green Building Council resources

Aerators are installed on plumbing fixtures to achieve water savings. A faucet aerator mixes air into the water stream, reducing the flow rate while maintaining acceptable user performance for handwashing and similar uses. In LEED Water Efficiency, reducing indoor potable water use is achieved by selecting efficient fixtures and fittings, such as low-flow lavatory faucets, showerheads, toilets, urinals, and flow restrictors. Aerators do not pinpoint leaks; leak detection is usually supported by metering, monitoring, inspections, or water management practices. Aerators also do not determine performance by themselves, although fixture flow rates are used in water calculations. Tracking consumption trends is the role of building-level or system-level water meters. Aerators are a simple and effective demand-reduction strategy.

LEED Building Design and Construction: Homes is the rating system that applies to single-family homes, low-rise multi-family homes, and mid-rise multi-family homes1. It includes the ability to reduce point thresholds for LEED certification levels based on building size, as smaller homes tend to have lower environmental impacts than larger homes2. The point thresholds are determined by the size of the house compared to the number of bedrooms1.

 2 LEED v4: Building Design + Construction Guide, Homes, p. 171 The LEED rating system - Ecohome.

This is the correct order of the LEED certification process for most projects1. The first step is to register the project on LEED Online and pay the registration fee2. The second step is to prepare the application by collecting and uploading the required information and documents according to the chosen rating system and credits2. The third step is to submit the application and pay the certification fee2. The fourth step is to undergo the application review by a LEED accredited third party, which may request clarifications or corrections2. The final step is to receive the certification decision and the LEED plaque and certificate2.

Life-cycle cost analysts of a new construction includes consideration of

cost of purchasing window glazing

cost of adding accessible parking

cost of challenging a real estate tax assessment

cost of subsidizing the use of public transportation

Answer: A

Life-cycle cost analysis (LCCA) is a method for assessing the total cost of owning a facility or running a project. It considers all the costs associated with obtaining, owning, and disposing of an investment1. The cost of purchasing window glazing is one of the initial costs that affects the energy performance and thermal comfort of a building2. Therefore, it is included in the LCCA of a new construction.

https://www.usgbc.org/credentials/leed-green-associate

Thermal comfort is the correct answer because the LEED Indoor Environmental Quality category focuses on the health, comfort, and well-being of occupants inside the building. Important EQ issues include indoor air quality, lighting quality, daylight, views, acoustics, low-emitting materials, occupant control, and thermal comfort. Thermal comfort is affected by air temperature, radiant temperature, humidity, air movement, clothing level, and occupant activity. Shape optimization may influence design efficiency, but it is not a primary EQ goal. Energy efficiency belongs mainly to Energy and Atmosphere, although some strategies may create synergies with EQ. Structural load capacity is a building engineering issue, not an Indoor Environmental Quality credit focus. Therefore, thermal comfort is the best LEED Green Associate answer.