Free CWNP CWDP-305 Practice Exam with Questions & Answers | Set: 9

To ensure that Access Points (APs) are installed in the exact locations specified in the design, it's essential to use visual aids and physical markers.Cameras can capture images of the intended installation sites, and marking tools can be used to indicate precise mounting locations on-site.This approach minimizes errors during installation and ensures adherence to the design plan.

The CWDP-305 Official Study and Reference Guide highlights the use of such tools:

"Use cameras and marking tools to document and indicate AP placement, ensuring accurate installation according to the design."

Comprehensive and Detailed Explanation:

In a centralized WLAN architecture, the WLAN controller is responsible for managing QoS (Quality of Service) settings. When sending an 802.11 frame to a lightweight AP, the controller places the User Priority (UP) value in the QoS Control field of the 802.11 frame header. This ensures that the frame is transmitted with the appropriate priority over the wireless medium, maintaining QoS for applications such as voice and video.

Comprehensive and Detailed Explanation:

Let's calculate the total loss/gain step by step:

Cable Loss:Each meter reduces the signal by a factor of 4. Over 10 meters:

Total attenuation factor = 4^10 = 1,048,576

In dB: 10 * log10(1,048,576) ≈ 60 dB loss

Amplifier Gain:Output is 8 times the input:

Gain in dB: 10 * log10(8) ≈ 9 dB gain

Filter Loss:Given as 5 dB loss.

Total Loss/Gain:

Total = Cable Loss - Amplifier Gain + Filter Loss

Total = 60 dB - 9 dB + 5 dB = 56 dB loss

However, this calculation leads to 56 dB loss, which is not among the provided options. Let's reassess the cable loss calculation.

Upon reevaluation:

Each meter reduces the signal by a factor of 4, so per meter loss in dB: 10 * log10(4) ≈ 6.02 dB

Over 10 meters: 6.02 dB/m * 10 m = 60.2 dB loss

Now, total loss/gain:

Cable Loss: 60.2 dB

Amplifier Gain: 10 * log10(8) ≈ 9.03 dB

Filter Loss: 5 dB

Total = 60.2 dB - 9.03 dB + 5 dB ≈ 56.17 dB loss

Rounded to the nearest whole number:56 dB loss

Correct Answer:C

In wired networks, VLANs (Virtual Local Area Networks) are used to segment network traffic into separate broadcast domains, effectively isolating traffic for security and performance purposes.Each VLAN operates as its own distinct network segment.

In wireless networks, while VLANs are used to segregate traffic once it reaches the wired infrastructure, the wireless medium itself is inherently a shared medium.This means that, over the air, all wireless clients share the same RF space, and broadcasts are received by all clients regardless of VLAN assignment.Therefore, VLANs in wireless networks do not inherently provide the same level of broadcast domain separation as in wired networks.

Comprehensive and Detailed Explanation:

A signal with a low duty cycle indicates that it is active only for short periods and remains inactive for the majority of the time.Such signals typically have minimal impact on WLAN performance because they occupy the channel infrequently, allowing Wi-Fi transmissions to occur during the inactive periods.Therefore, while it's essential to be aware of such signals, they generally do not pose significant interference to WLAN operations.

Comprehensive and Detailed Explanation:

Modulation is the technique of varying a carrier signal's properties—such as amplitude, frequency, or phase—to encode and transmit data. This process allows the transmission of information over various mediums, including radio frequencies used in wireless communications.

Option A:Describes spread spectrum techniques, not modulation.

Option B:Is a partial description but lacks the specificity of how the carrier is modified.

Option D:Is a vague statement that doesn't accurately define modulation.

Configuration backups are a critical component of operational and maintenance plans.They ensure that, in the event of a failure or misconfiguration, the network can be restored to a known good state quickly.Despite their importance, configuration backups are often overlooked, leading to prolonged downtimes and increased recovery times during network issues.

If the number of APs changes due to budget constraints, a complete redesign is required to reevaluate coverage, capacity, and performance expectations. Increasing transmit power or relying on 2.4 GHz is not a valid solution, as it can result in co-channel interference and poor roaming.

From CWDP-305:

“A design is based on specific coverage and capacity requirements. Any major change, such as reducing the number of APs, requires a full redesign to determine the impact and ensure that business requirements can still be met.”

— Reference: CWDP-305 Official Study and Reference Guide, Chapter on Wireless Design Process

In a bandpass filter, the ripple refers to the variation in insertion loss within the passband.If the maximum in-band loss is 1.5 dB and the ripple is 0.4 dB, the minimum in-band loss can be calculated by subtracting the ripple from the maximum loss:blog.knowlescapacitors.com

1.5 dB (maximum loss) - 0.4 dB (ripple) = 1.1 dB (minimum loss)

Therefore, the minimum in-band loss is 1.1 dB.

The 6 GHz band, introduced with Wi-Fi 6E (802.11ax), mandates the use of WPA3 security protocols. Specifically, WPA3-Personal and WPA3-Enterprise are required for networks operating in this band. WPA2-Personal is not permitted in the 6 GHz spectrum due to regulatory and security requirements.

Therefore, recommending WPA2-Personal for VoIP support in the 6 GHz band is technically inappropriate, as it does not comply with the mandatory security standards for this frequency range.