Free CWNP CWDP-305 Practice Exam with Questions & Answers | Set: 10

Confidentiality is a core principle of information security that involves keeping data hidden or inaccessible from unauthorized users. In the context of WLANs, confidentiality is maintained through encryption protocols such as WPA2/WPA3, which ensure that even if a data transmission is intercepted, its contents remain unreadable to unintended receivers.

From the CWDP-305 Study Guide, confidentiality is defined as:

“The protection of transmitted data from unauthorized disclosure. This is typically accomplished through encryption methods that obscure the original content, ensuring that intercepted packets cannot be deciphered by unintended recipients.”

Other security terms like authentication (verifying identity), integrity (ensuring data is not altered), and nonrepudiation (assurance of origin) are also important but pertain to different aspects of data protection.

— Reference: CWDP-305 Official Study and Reference Guide, Chapter on Wireless Design Process

Even when skipping a full pre-design site survey, performing a spectrum analysis walkthrough is considered a best practice. This is because spectrum analysis provides insights into non-Wi-Fi interference sources, such as microwave ovens, Bluetooth devices, cordless phones, and other RF-emitting equipment that may affect WLAN performance.

From CWDP-305:

“A spectrum analysis walkthrough of the facility, even in the absence of a full site survey, can reveal sources of interference that would otherwise go undetected. This step is highly recommended to validate the RF environment.”

— Reference: CWDP-305 Official Study and Reference Guide, Chapter on ProtocolandSpectrum Analysis

When designing a wireless bridge over a distance of 13 kilometers, it's crucial to account for the Earth's curvature, known as the "Earth bulge," which can obstruct the Fresnel Zone and degrade the signal.The Fresnel Zone is an elliptical area around the line of sight between two antennas, and any obstruction within this zone can cause signal diffraction and attenuation.

The CWDP-305 Official Study and Reference Guide highlights this consideration:

"For long-distance point-to-point links, the Earth’s curvature becomes a factor, and the Fresnel Zone must be clear of obstructions, including the Earth bulge, to maintain signal integrity."

Therefore, when planning such links, engineers must calculate the Fresnel Zone and ensure that the Earth bulge does not intrude into this zone, possibly requiring higher antenna placements or alternative solutions.

When APs are deployed in the same physical pattern across floors without channel and physical spacing considerations, co-channel interference (CCI) between floors occurs. This is particularly problematic when APs on different floors are vertically aligned on the same channels.

From CWDP-305:

“In multi-floor deployments, avoid placing APs on the same vertical axis across floors using the same channel. This leads to CCI. Stagger AP locations and vary channels to reduce interference.”

— Reference: CWDP-305 Official Study Guide, Wireless Design Process Chapter