Free CWNP CWDP-305 Practice Exam with Questions & Answers | Set: 4

Dynamic Frequency Selection (DFS) channels are shared with radar systems, such as those used in airports.Enabling DFS in such environments can lead to interference with radar operations and cause APs to frequently change channels, disrupting WLAN stability.Therefore, DFS channels should not be enabled in airport environments.

The CWDP-305 Official Study and Reference Guide advises against the use of DFS channels in areas where radar systems operate to prevent potential interference and ensure network reliability.

In stadium environments where aesthetics are important, using under-seat enclosures for APs is a common practice. These enclosures conceal the APs, protect them from physical damage, and maintain the manufacturer's warranty, as they do not require modifications like painting or unauthorized mounting methods.

A WLAN scanner (e.g., inSSIDer, WiFi Analyzer) is a simple, often free or low-cost tool that scans the air for available SSIDs and channels. It is used for basic visibility of neighbor WLANs, including SSID names, signal strengths, and channels in use.

From CWDP-305:

“WLAN scanners are useful for identifying neighboring WLANs, SSIDs, and basic RF characteristics. While not as detailed as professional survey tools, they are sufficient for quick checks.”

— Reference: CWDP-305 Official Study and Reference Guide, Chapter on ProtocolandSpectrum Analysis

The Physical Installation Guide is a document that offers step-by-step instructions for technicians on mounting and configuring access points. It includes details such as mounting locations, orientation, cabling requirements, and configuration settings. This guide ensures that APs are installed consistently and according to the design specifications, which is crucial for optimal network performance. Unlike the Statement of Work or Bill of Materials, which outline project scope and equipment lists respectively, the Physical Installation Guide focuses specifically on the practical aspects of AP deployment.

Once the WLAN is validated and operational, the next step is knowledge transfer. Support staff must be trained on monitoring, troubleshooting, and configuration, while end-users benefit from understanding basic usage and policies. Executives and guests are not directly involved in daily operations.

From CWDP-305:

“Training should be delivered to IT support staff responsible for WLAN operations, and optionally to end-users for user-side clarity. This ensures ongoing support, proper use, and reduced downtime.”

— Reference: CWDP-305 Official Study and Reference Guide, Chapter on Post-Design ValidationandTroubleshooting

Wi-Fi Multimedia (WMM) is a subset of the IEEE 802.11e standard and is essential for enabling Quality of Service (QoS) features in Wi-Fi networks. When WMM is not enabled on an 802.11n WLAN, QoS features are unavailable, which can adversely affect the performance of latency-sensitive applications such as voice over IP (VoIP) and video streaming.گروه آموزشی و پژوهشی سیب

Additionally, certain 802.11n features, like higher data rates and frame aggregation, may not be fully utilized without WMM, leading to suboptimal network performance.

Project parameters in WLAN design software typically include requirements and constraints like:

Minimum required signal strength (e.g., –67 dBm for VoIP)

Minimum required SNR

Desired data rate coverage

These are configured before design work begins and guide how AP placement and coverage will be modeled.

From CWDP-305:

“Project parameters such as minimum signal strength, data rate, and required SNR must be defined before the actual placement of access points. These values define the target RF environment.”

— Reference: CWDP-305 Official Study and Reference Guide, Chapter on Wireless Design Process

In the 5 GHz band, certain channels like 144 are not universally supported across all devices, especially older 802.11n clients. If the AP is operating on channel 144, and the client's regulatory domain or hardware does not support this channel, the SSID will not be visible to the client.

The CWDP-305 Official Study and Reference Guide notes:

"Client devices may not support all channels in the 5 GHz band, depending on their regulatory domain and hardware capabilities. Channel 144, for example, is not supported by all 802.11n clients."

When establishing a long-distance wireless bridge, such as one spanning 13 kilometers, it's crucial to consider the Fresnel Zone, which is the elliptical area around the line-of-sight path between two antennas. Obstructions within this zone can cause signal degradation due to diffraction.

One significant factor affecting the Fresnel Zone over long distances is the Earth's curvature, commonly referred to as the Earth bulge. As the distance between the two points increases, the Earth's surface curves away, potentially intruding into the Fresnel Zone and obstructing the signal path. Therefore, engineers must calculate the Earth's bulge and ensure that antenna heights are sufficient to maintain a clear Fresnel Zone.

While Free Space Path Loss (FSPL), antenna gain, and receiver sensitivity are essential parameters in link budget calculations, they do not directly address the physical clearance required in the Fresnel Zone.

The Physical Installation Guide is developed during the design phase and delivered to the installation team. It contains detailed AP locations (including mounting heights and orientations), cabling instructions, hardware installation standards, and any specific AP configuration notes needed during physical deployment.

From CWDP-305:

“A Physical Installation Guide provides specific instructions to installers, such as mounting height, orientation, and any environmental considerations. This ensures that APs are installed correctly and according to the design.”

— Reference: CWDP-305 Official Study and Reference Guide, Chapter on Wireless Design Process