Free CWNP CWDP-303 Practice Exam with Questions & Answers

Name: How to Pass CWDP-303 Exams
Brand: Examstrack
SKU: cwdp-303
Price: 36.75 USD
Availability: InStock

Questions 1

Which DHCP option, when required, should be configured and enabled to help APs locate their wireless LAN controller?

Options:

150

CWNP CWDP-303 Premium Access

Theodore

20-Jun-2025

examstrack.com's PDFs are a treasure trove of knowledge. They are a game-changer for the CWDP-303 exam.

Questions 2

Your new customer is concerned about maintaining privacy for their proprietary information when you conduct information gathering for their WLAN design. Which document can you use to directly address their concern?

Options:

NDA

SoW

BoM

Hold Harmless

Questions 3

Your customer requires a security solution in which client credentials are used and the authentication server must have a certificate with optional client certificate use. Which EAP method would be the best fit for their requirement?

Options:

EAP-FAST

EAP-TTLS

EAP-TLS

LEAP

Questions 4

Using a SCA means that all APs will be using the same channel in a given layer. How is the AP with which the client associates determined?

Options:

All APs share a virtual IP address. A controller will tell the closest AP to the client to communicate with it, since it has a greater RSSI from the client.

All APs share a virtual Multicast Address. A controller will tell the closest AP to the client to communicate with it, since it has a greater RSSI from the client.

All APs share a virtual BSSID. A controller will tell the closest AP to the client to communicate with it, since it has a greater RSSI from the client.

The client selects the AP based on a known set of MAC to BSSID mappings stored in the clients authorized SSID listing.

Questions 5

After designing a WLAN infrastructure using predictive design software. What’s the best way to validate the predictive design in the physical space before deployment, if time and budget allow for it?

Options:

Deploy all of the APs as they’re shown in the predictive design and perform an active site survey.

Deploy all of the APs as they’re shown in the predictive design and perform a passive site survey.

Use a client device positioned where the APs will be installed and measure the signal from the client device.

Perform an AP-on-a-Stick survey using AP locations based upon the predictive design to confirm each AP’s placement.

Questions 6

You are conducting a physical site survey where heavy machinery is repaired. What is a common item required specifically for this type of survey?

Options:

Personal Protective Equipment (PPE)

Low gain antennas

Low power APs

Indoor APs

Questions 7

What document should be created that provides instructions for install technicians to mount and configure APs?

Options:

Hold Harmless

Statement of Work

Bill of Materials

Physical installation guide

Questions 8

When using a predictive design tool, you have selected APs with an antenna gain 3 dBi and set the transmit power of the predicted APs to 25 mW. What should be EIRP of the APs in the design?

Options:

11 dBm

6.25 mW

125 mW

17 dBm

Questions 9

What is the best method of gathering attenuation measurements from any building materials or objects?

Options:

After measuring the RSSI in free space 5 meters (16.5 feet) apart, put an AP 4 meters (13 feet) away from the wall or object on one side and your measuring device 0.67 meters (2 feet) away from the wall or object on the other side. Take measurement and compare the difference.

Use the pre-built attenuation values in the predictive design tool.

After measuring the RSSI in free space 1 meter (3 feet) apart, put an AP 0.32 meters (1 feet) away from the wall or object on the other side. Take measurements and compare the difference.

Look on the Internet for attenuation values for each one of the materials that might attenuate the Wi-Fi signal using the material provider’s websites.

Questions 10

Switches and APs have already been chosen by your customer. All switches support 802.3bz MultiGig interfaces and APs are 4x4:4 802.11ac wave 2 capable of using dual-5GHz and have one MultiGig interface. Some cable drops for the APs will run for more than 180.5 feet (or 55 meters). To support MultiGig, what is the best choice of cabling?

Options:

Cat-5

Cat-6

Cat-5e

Cat-6a