Free CWNP CWDP-304 Practice Exam with Questions & Answers

In most WLAN design tools, after defining project parameters or during the project creation wizard what action will you take before you can begin the actual design process?

A company wants to connect its headquarters to its remote office that is 13 kilometers away using a wireless bridge. What requirement must not

be forgotten by their Wireless Engineer when considering the Fresnel Zone?

To increase capacity in a coverage-based wireless network, which of the following techniques are typically recommended?(Choose all that apply.)

Response:

You have been tasked with performing safety and operations training for outdoor bridge link installation. The antennas are to be installed on a 70-foot tower on one end and the roof top of an office building on the other end.

What might be required for the tower installation?

Response:

While performing a validation site survey, you realize that overlapping channels are being used on the 2.4 GHz bad due to the automatic channel

assignment algorithm of the WLAN infrastructure. What should you do to prevent this?

For what purpose is SSID hiding generally useful?(Choose all that apply.)

Response:

In a convention center, you have received complaints about the WLAN infrastructure. At this moment, the are only two APs in one auditorium.

After analyzing the situation, you determined that there are more client devices that the infrastructure was designed for. There are only two APs to support more than 300 devices using the Wi-Fi at the same time.

What should you do to make the Wi-Fi work as expected?

Response:

You are using site software design features. You have imported a floor plan, but the simulated RF coverage is nowhere close to the real RF coverage you see with a walkabout.

Given that the simulation is significantly different, when step was likely missed when using the software?

Response:

The thermal noise is at −174 dBm/Hz. A spectrum analyzer has a resolution bandwidth of 1 kHz and a 5 dB noise figure. What is the level of the noise floor?

Response:

What statement is true of a WLAN design that supports Real-Time Location Services (RTLS) with 802.11 RFID asset tags?