Summer Sale Limited Time 70% Discount Offer - Ends in 0d 00h 00m 00s - Coupon code: 70track

Free Cisco 300-410 Practice Exam with Questions & Answers | Set: 12

Questions 166

300-410 Question 166

Refer to the exhibit. The services at branch B are down. An engineer notices mal rouler A and router B are not exchanging any routes Which configuration resolves the issue on router B?

A)

300-410 Question 166

B)

300-410 Question 166

C)

300-410 Question 166

D)

300-410 Question 166

Options:
A.

Option A

B.

Option B

C.

Option C

D.

Option D

Cisco 300-410 Premium Access
Questions 167

300-410 Question 167

Refer to the exhibit. R1 lost its directly connected EIGRP peer 172.16.33.2 (SW1). Which configuration resolves the issue?

Options:
A.

key chain EIGRP

keyl

key-string Cisco

!

interface GigabitEthernet 2.10

Ip authentication mode elgrp 88 md5

Ip authentication key-chain elgrp 88 EIGRP

B.

key chain EIGRP

keyl

key-string Cisco

!

interface GigabitEthernet 2

ip authentication mode elgrp 88 md5

ip authentication key-chain elgrp 88 Cisco

C.

key chain EIGRP

keyl

key-string Cisco

!

interface GigabitEthernet 2

ip authentication mode elgrp 88 md5

ip authentication key-chain elgrp 88 EIGRP

D.

key chain EIGRP

keyl

key-string Cisco

!

interface GigabitEthernet 2.10

ip authentication mode eigrp 88 md5

ip authentication key-chain eigrp 88 Cisco

Questions 168

What is a function of the IPv6 DHCP Guard feature for DHCP messages?

Options:
A.

Only access lists are supported for matching traffic.

B.

All client messages are always switched regardless of the device role.

C.

It blocks only DHCP request messages.

D.

If the device is configured as a DHCP server, no message is switched.

Questions 169

300-410 Question 169

Refer to the exhibit. The client server but the show command does not show the IPv6 DHCP bindings on the server. Which action resolves the issue?

Options:
A.

Extend the DHCP lease time because R1 removed the IPv6 address earlier after the lease expired.

B.

Configure H1 as the DHCP client that manually assigns the IPv6 address on interlace e0/0..

C.

Use the 2001:DBB:BAD:C0DE::/64 prefix for the DHCP pool on R1.

D.

Configure authorized DHCP servers to avoid IPv6 addresses from a rogue DHCP server.

Questions 170

Refer to the exhibit.

300-410 Question 170

Reachability between servers in a network deployed with DHCPv6 is unstable. Which command must be removed from the configuration to make DHCPv6 function?

Options:
A.

ipv6 dhcp server DHCPPOOL

B.

ipv6 address 2001:0:1:4::/64

C.

ipv6 nd ra suppress

D.

address prefix 2001:0:1:4::/64 lifetime infinite infinite

Questions 171

How does LDP operate in an MPLS network?

Options:
A.

When topology changes occur such as a router failure, LDP generates peer discovery messages that terminate the LDP season to propagate an LSP change.

B.

When an adjacent LSR receives LDP discovery messages. TCP two-way handshake ensures that the LDP session has unidirectional connectivity.

C.

Peer routers establish the LDP session, and the LDP neighbors maintain and terminate the session by exchanging messages

D.

LDP notification messages allow LERs to exchange label information to determine the next hops within a particular LSP.

Questions 172

300-410 Question 172

Refer to the exhibit. A network engineer receives a report that Spoke 1 users can perform bank transactions with the server located at the Center site, but Spoke 2 users cannot. Which action resolves the issue?

Options:
A.

Configure the Spoke 2 users IP on the router B OSPF domain

B.

Configure encapsulation dot1q 78 on the router C interface.

C.

Configure IPv6 on the routers B and C interfaces

D.

Configure OSPFv2 on the routers B and C interfaces

Questions 173

Refer to the exhibits.

300-410 Question 173

300-410 Question 173

London must reach Rome using a faster path via EIGRP if all the links are up but it failed to take this path Which action resolves the issue?

Options:
A.

Increase the bandwidth of the link between London and Barcelona

B.

Use the network statement on London to inject the 172 16 X 0/24 networks into EIGRP.

C.

Change the administrative distance of RIP to 150

D.

Use the network statement on Rome to inject the 172 16 X 0/24 networks into EIGRP

Questions 174

Refer to the exhibit.

300-410 Question 174

After a new regional office is set up,not all guests can access the internet via guest Wi

Fi. Clients are getting the correct IP address from guest Wi-Fi VLAN 364. which action resolves the issue ?

Options:
A.

Allow 10.66.46.0/23 in the outbound ACL

B.

Allow DNS traffic through the outbound ACL

C.

Allow DNS traffic through the inbound ACL

D.

Allow 10.66.46.0/23 in the inbound ACL

Questions 175

A DMVPN network is preconfigured with tunnel 0 IP address 192.168.1.254 on the HUB, IP connectivity, crypto policies, profiles, and EIGRP AS 100. The NHRP password is ccnp123, and the network ID and tunnel key is EIGRP ASN Do not introduce a static route. Configure DMVPN connectivity between routers BR1 and BR2 to the HUB router using physical interface as the tunnel source to achieve these goals:

300-410 Question 175

300-410 Question 175

300-410 Question 175300-410 Question 175

Options:
Questions 176

300-410 Question 176

Refer to the exhibit. The 130.130.130.0/24 route shows in the R2 routing table but is getting filtering toward R3. Which action resolves the issue?

Options:
A.

Automatic route summarization must be enabled on R2.

B.

The incoming filter list for all interfaces must be set on R2.

C.

IGP synchronization must be disabled on R2.

D.

The outgoing filter list for all interfaces must be set on R2.

Questions 177

300-410 Question 177

Refer to the exhibit. Which action limits the access to R2 from 192.168.12.1?

Options:
A.

Swap sequence 10 with sequence 20 in access-list 100.

B.

Modify sequence 20 to permit tcp host 192.168.12.1 eq 22 any to access-list 100

C.

Swap sequence 20 with sequence 10 in access-list 100

D.

Modify sequence 10 to deny tcp any eq 22 any to access-list 100.

Questions 178

300-410 Question 178

Refer to the exhibit. A network engineer is troubleshooting a failed link between R2 and R3 No traffic loss is reported from router R5 to HQ Which command fixes the separated backbone?

Options:
A.

R2(config-router)#no area 21 stub

B.

R2(config_router)#area 21 virtual-link 192.168.125.5

C.

R3(config-router)#area 21 virtual-link 192.168.125.5

D.

R3(config-router)#no area 21 stub

Questions 179

The network administrator is tasked to configure R1 to authenticate telnet connections based on Cisco ISE using RADIUS. ISE has been configured with an IP address of 192.168.1.5 and with a network device pointing towards R1 (192.168.1.1) with a shared secret password of Cisco123. If ISE is down, the administrator should be able to connect using the local database with a username and password combination of admin/cisco123.

The administrator has configured the following on R1:

300-410 Question 179

ISE has gone down. The Network Administrator is not able to Telnet to R1 when ISE went down. Which two configuration changes will fix the issue? (Choose two.)

300-410 Question 179

Options:
A.

Option A

B.

Option B

C.

Option C

D.

Option D

E.

Option E

Questions 180

:593

300-410 Question 180

Refer to the exhibit. Which two configurations are required on R2 to prevent a routing loop caused by the redistribution from OSPF back into EIGRP? (Choose two.)

300-410 Question 180

Options:
A.

Option A

B.

Option B

C.

Option C

D.

Option D

E.

Option E

Exam Code: 300-410
Certification Provider: Cisco
Exam Name: Implementing Cisco Enterprise Advanced Routing and Services (300-410 ENARSI)
Last Update: Jun 21, 2026
Questions: 642

Cisco Related Exams

How to pass Cisco 300-415 - Implementing Cisco SD-WAN Solutions (300-415 ENSDWI) Exam
How to pass Cisco 300-420 - Designing Cisco Enterprise Networks (ENSLD) v1.1 Exam
How to pass Cisco 300-425 - Designing Cisco Enterprise Wireless Networks (ENWLSD) Exam
How to pass Cisco 300-430 - Implementing Cisco Enterprise Wireless Networks (300-430 ENWLSI) Exam
How to pass Cisco 350-401 - Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) Exam
How to pass Cisco 300-435 - Automating Cisco Enterprise Solutions (ENAUTO) Exam
How to pass Cisco 300-440 - Designing and Implementing Cloud Connectivity (ENCC) Exam
How to pass Cisco 300-445 - Designing and Implementing Enterprise Network Assurance(300-445 ENNA) Exam
700-905 - Cisco HyperFlex for Systems Engineers
500-052 - Deploying Cisco Unified Contact Center Express
500-442 - Administering Cisco Contact Center Enterprise (CCEA)
300-610 - Designing Cisco Data Center Infrastructure for Traditional and AI Workloads
300-220 - Conducting Threat Hunting and Defending using Cisco Technologies for Cybersecurity 300-220 CBRTHD
300-515 - Implementing Cisco Service Provider VPN Services (300-515 SPVI)
700-101 - Business Edition 6000 for Sales Engineers
Cisco Free Access
Get Cisco Full Access

Cisco Free Exams
Cisco Free Exams
Examstrack offers free Cisco exam materials and practice tests to aid your Cisco certification journey.