Summer Sale Limited Time 70% Discount Offer - Ends in 0d 00h 00m 00s - Coupon code: 70track

Free Cisco 300-410 Practice Exam with Questions & Answers | Set: 13

Questions 181

What are two characteristics of a VRF instance? (Choose two)

Options:
A.

It is defined by the VPN membership of a customer site attached to a P device.

B.

Each VRF has a different set of routing and CEF tables.

C.

AII VRFS share customers routing and CEF tables.

D.

An interface must be associated to one VRF

E.

A customer site can be associated to different VRFs.

Cisco 300-410 Premium Access
Questions 182

Refer to the exhibit.

300-410 Question 182

R1 is configured with uRPF, and ping to R1 is failing from a source present in the R1 routing table via the GigatxtEthernet 0/0 interface. Which action resolves the issue?

Options:
A.

Remove the access list from the interface GigabrtEthernet 0/0

B.

Modify the uRPF mode from strict to loose

C.

Enable Cisco Express Forwarding to ensure that uRPF is functioning correctly

D.

Add a floating static route to the source on R1 to the GigabitEthernet 0/1 interface

Questions 183

Refer to the exhibit.

300-410 Question 183

300-410 Question 183

An engineer identifier a Layer 2 loop using DNAC. Which command fixes the problem in the SF-D9300-1 switch?

Options:
A.

no spanning-tree uplinkfast

B.

spanning-tree loopguard default

C.

spanning-tree backbonesfast

D.

spanning-tree portfast bpduguard

Questions 184

Refer to the exhibit.

300-410 Question 184

A network administrator is discovering a Cisco Catalyst 9300 and a Cisco WLC 3504 in Cisco DNA Center. The Catalyst 9300 is added successfully However the WLC is showing [ error " uncontactable " when the administrator tries to add it in Cisco DNA Center. Which action discovers WLC in Cisco DNA Center successfully?

Options:
A.

Copy the .cert file from the Cisco DNA Center on the USB and upload it to the WLC 3504.

B.

Delete the WLC 3504 from Cisco DNA Center and add it to Cisco DNA Center again.

C.

Add the WLC 3504 under the hierarchy of the Catalyst 9300 connected devices.

D.

Copy the .pern file from the Cisco DNA Center on the USB and upload it to the WLC 3504.

Questions 185

300-410 Question 185

Refer to the exhibit. Which action restores the routes from neighbors while still filtering 1.1.1.0/24?

Options:
A.

Add a second line in the access list to permit any.

B.

Modify the route map to permit the access list instead of deny it

C.

Modify the access list to deny instead of permit it.

D.

Add a second sequence in the route map permit 20

Questions 186

A network administrator is tasked to permit http and https traffic only toward the internet from the User1 laptop to adhere to company’s security policy. The administrator can still ping to www.cisco.com Which interface should the access list 101 be applied to resolve this issue?

300-410 Question 186

Options:
A.

Interface G0/48 in the incoming direction

B.

Interface G0/0 in the outgoing direction.

C.

Interface S1/0 in the outgoing direction.

D.

Interface G0/0 in the incoming direction.

Questions 187

Exhibit:

300-410 Question 187

Bangkok is using ECMP to reach to the 192.168.5.0/24 network. The administrator must configure Bangkok in such a way that Telnet traffic from 192.168.3.0/24 and192.168.4.0/24 networks uses the HongKong router as the preferred router. Which set of configurations accomplishes this task?

Options:
A.

access-list 101 permit tcp 192.168.3.0 0.0.0.255 192.168.5.0 0.0.0.255access-list 101 permit tcp 192.168.4.0 0.0.0.255 192.168.5.0 0.0.0.255!route-map PBR1 permit 10match ip address 101set ip next-hop 172.18.1.2interface Ethernet0/3ip policy route-map PBR1

B.

access-list 101 permit tcp 192.168.3.0 0.0.0.255 192.168.5.0 0.0.0.255 eq 23access-list 101 permit tcp 192.168.4.0 0.0.0.255 192.168.5.0 0.0.0.255 eq 23!route-map PBR1 permit 10match ip address 101set ip next-hop 172.18.1.2interface Ethernet0/1ip policy route-map PBR1

C.

access-list 101 permit tcp 192.168.3.0 0.0.0.255 192.168.5.0 0.0.0.255 eq 23access-list 101 permit tcp 192.168.4.0 0.0.0.255 192.168.5.0 0.0.0.255 eq 23!route-map PBR1 permit 10match ip address 101set ip next-hop 172.18.1.2!interface Ethernet0/3ip policy route-map PBR1

D.

access-list 101 permit tcp 192.168.3.0 0.0.0.255 192.168.5.0 0.0.0.255access-list 101 permit tcp 192.168.4.0 0.0.0.255 192.168.5.0 0.0.0.255!route-map PBR1 permit 10match ip address 101set ip next-hop 172.18.1.2!interface Ethernet0/1ip policy route-map PBR1

Questions 188

Refer to the exhibit.

300-410 Question 188

The administrator successfully logs into R1 but cannot access privileged mode commands. What should be configured to resolve the issue?

Options:
A.

aaa authorization reverse-access

B.

secret cisco123! at the end of the username command instead of password cisco123!

C.

matching password on vty lines as cisco123!

D.

enable secret or enable password commands to enter into privileged mode

Questions 189

An engineer configured a Cisco router to send reliable and encrypted notifications for any events to the management server. It was noticed that the notification messages are reliable but not encrypted. Which action resolves the issue?

Options:
A.

Configure all devices for SNMPv3 informs with priv.

B.

Configure all devices for SNMPv3 informs with auth.

C.

Configure all devices for SNMPv3 traps with auth.

D.

Configure all devices for SNMPv3 traps with priv.

Questions 190

Refer to the exhibit.

300-410 Question 190

300-410 Question 190

An engineer configured BGP between routers R1 and R3 The BOP peers cannot establish neighbor adjacency to be able to exchange routes. Which configuration resolves this issue?

Options:
A.

R3router bgp 6502address-family ipv6neighbor AB01:2011:7:100::1 activate

B.

R1router bgp 6501address-family ipv6neighbor AB01:2011:7:100;:3 activate

C.

R3router bgp 6502neighbor AB01:2011:7:100::1 ebgp-muttlhop 255

D.

R1router bgp 6501 neighborAB01:2011:7:100::3ebgp-multihop255

Questions 191

Drag and drop the LDP features from the left onto the descriptions on the right

300-410 Question 191

Options:
Questions 192

Which two components are needed for a service provider to utilize the LVPN MPLS application? (Choose two.)

Options:
A.

The P routers must be configured for MP-iBGP toward the PE routers

B.

The P routers must be configured with RSVP.

C.

The PE routers must be configured for MP-iBGP with other PE routers

D.

The PE routers must be configured for MP-eBGP to connect to CEs

E.

The P and PE routers must be configured with LDP or RSVP

Exam Code: 300-410
Certification Provider: Cisco
Exam Name: Implementing Cisco Enterprise Advanced Routing and Services (300-410 ENARSI)
Last Update: Jun 20, 2026
Questions: 642

Cisco Related Exams

How to pass Cisco 300-415 - Implementing Cisco SD-WAN Solutions (300-415 ENSDWI) Exam
How to pass Cisco 300-420 - Designing Cisco Enterprise Networks (ENSLD) v1.1 Exam
How to pass Cisco 300-425 - Designing Cisco Enterprise Wireless Networks (ENWLSD) Exam
How to pass Cisco 300-430 - Implementing Cisco Enterprise Wireless Networks (300-430 ENWLSI) Exam
How to pass Cisco 350-401 - Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) Exam
How to pass Cisco 300-435 - Automating Cisco Enterprise Solutions (ENAUTO) Exam
How to pass Cisco 300-440 - Designing and Implementing Cloud Connectivity (ENCC) Exam
How to pass Cisco 300-445 - Designing and Implementing Enterprise Network Assurance(300-445 ENNA) Exam
700-246 - Cisco Environmental Sustainability Practice-Building - Stage 2
300-610 - Designing Cisco Data Center Infrastructure for Traditional and AI Workloads
500-443 - Advanced Administration and Reporting of Contact Center Enterprise (CCEAAR)
300-110 - Designing Cisco Wireless Networks (300-110 WLSD) v1.2
500-490 - Designing Cisco Enterprise Networks (ENDESIGN) exam
352-011 - Cisco Certified Design Expert Practical Exam
648-247 - Implementing Cisco Connected Physical Security 2 Exam
Cisco Free Access
Get Cisco Full Access

Cisco Free Exams
Cisco Free Exams
Examstrack offers free Cisco exam materials and practice tests to aid your Cisco certification journey.