Free Cisco 350-601 Practice Exam with Questions & Answers | Set: 2

What is the impact of an EPLD upgrade on a Cisco MDS 9000 Series Switch?

Refer to the exhibit.

An engineer must enable interlace Eth1/2 when the interface Ethi/1 is shut down using EEM on a Cisco Nexus 9000 Series Switch. Which command set accomplishes this goal?

An engineer must allow in-band Cisco IMC profile configuration and deploy local storage policies for disks and LUNs. Which set of permissions must be used for a user profile to permit these actions?

An engineer must configure a Cisco MDS 9000 Series Switch for traffic analysis from the storage array. The storage array is connected to the interface fc2/1 in VSAN 10 and the traffic analyzer to fc4/2. The capture file must include ingress and egress traffic between the switch and the storage array. Also, only traffic in VSAN 10 must be captured. Which configuration set meets these requirements?

Refer to the exhibit.

Which Cisco MDS 9700 Series Switch module EPLDs are upgraded?

What is an advantage of NAS compared to SAN?

All logins to a Cisco Nexus 9000 Series Switch must pass through the TACACS+ server at IP address 192.168.10.10. The configuration must meet these requirements:

• The TACACS+ server must be used for SSH and Telnet.

• The TACACS+ server key must be Cisco123!.

• Management VRF must be used for connectivity.

• The deployment must fail back to local credentials if the TACACS+ server fails to respond within 30 seconds.

Drag and drop the code snippets from the right onto the blanks in the code on the left to complete the configuration. Not all code snippets are used.

Refer to the exhibit. An engineer is implementing an ERSPAN configuration to mirror web server traffic connected to N7K-2. Which ERSPAN configuration must be applied on N7K-1 to forward traffic to the network analyzer?

Refer to me exhibit An engineer is troubleshooting a connectivity issue for a VM with MAC address 00:50:56:88:10:14 running on me cisco UCS-8 Series blade in VLAN 10. Cisco DCS Manager is connected to a Cisco nexus 9000 Series switch over port channel 10. Currently, the VM Is unreachable from any source that Is outside of me Cisco UCS domain. Which action musí be takenlo allow me VM to be readable?

A network engineer must configure a Cisco MDS switch to use the local user database for console access if all AAA servers are unreachable. Which configuration should be applied to complete this task?