Free Cisco 300-430 Practice Exam with Questions & Answers | Set: 5

 For a large company requiring support for 32 VLANs for different departments, the most efficient solution is to configure one single SSID and use Cisco ISE for dynamic VLAN assignment based on user roles. Cisco ISE can classify users into different groups and assign them to the appropriate VLANs. This approach reduces the complexity of managing multiple SSIDs and simplifies the user experience while maintaining a high level of security and network segmentation. References: CCNP Enterprise Wireless Design ENWLSD 300-425 and Implementation ENWLSI 300-430 Official Cert Guide

The absence of rogue AP options in the navigation menu under Maps in Cisco Prime Infrastructure (PI) version 3.0 indicates that there is an issue with integrating location services, which are provided by Mobility Services Engine (MSE). Without adding MSE to PI, location-based services such as tracking rogue access points cannot be utilized or displayed within PI’s interface. References: CCNP Enterprise Wireless Design ENWLSD 300-425 and Implementation ENWLSI 300-430 Official Cert Guide

Fastlane is a feature developed by Apple and Cisco that provides a higher-quality user experience for critical business applications. To implement Fastlane, the WLAN must use the Platinum QoS profile, which is designed to prioritize business-critical traffic and applications. Since the IT department has updated the iPads to a specific version, it is important to ensure that the QoS settings align with the requirements of Fastlane to maintain application performance and security.

References := (CCNP Enterprise Wireless Design ENWLSD 300-425 and Implementation ENWLSI 300-430 Official Cert Guide)

For the MSE to communicate with the Cisco Wireless LAN Controller (WLC) over NMSP when installed on a different network, the necessary configuration is to allow TCP/16113 port on the firewall. NMSP uses TCP port 16113 for its communications, and opening this port on the firewall will enable the MSE and WLC to establish a connection and communicate effectively. References := (CCNP Enterprise Wireless Design ENWLSD 300-425 and Implementation ENWLSI 300-430 Official Cert Guide)

Enabling unicast AP multicast mode can correct the issue of increased controller CPU overhead and overall network utilization after multicast is enabled. This mode allows the controller to send multicast traffic to the APs as unicast, which is more efficient for the wireless medium and reduces the load on the controller’s CPU.

References := ( CCNP Enterprise Wireless Design ENWLSD 300-425 and Implementation ENWLSI 300-430 Official Cert Guide )

During the Extensible Authentication Protocol (EAP) process, the RADIUS server generates an encrypted session key after the client’s identity is authenticated. This session key is sent to the access point to encrypt data frames between the client and the access point. It ensures that each session has a unique encryption key, enhancing security. References: Look for information on EAP and RADIUS in the CCNP Enterprise Wireless Design ENWLSD 300-425 and Implementation ENWLSI 300-430 Official Cert Guide.

With the implementation of a BYOD policy, the security director should be concerned about malware and lost and stolen devices. Malware can compromise the corporate network if infected devices connect to it. Lost and stolen devices pose a risk of unauthorized access to corporate data and resources, potentially leading to data breaches. References := (CCNP Enterprise Wireless Design ENWLSD 300-425 and Implementation ENWLSI 300-430 Official Cert Guide)

The wireless client cannot reach the RUN state because it is not receiving an IP address. This is a crucial step in the connection process, as a valid IP address is necessary for the client to communicate on the network. Without it, the client cannot achieve the RUN state, which indicates full authentication and association.

The Media Stream feature on a Cisco WLC allows for the prioritization of streaming media. To guarantee at least 2 Mbps stream per user, the ‘coarse’ Resource Reservation Control (RRC) template should be used, as it provides the necessary bandwidth allocation for each user’s media stream. References: CCNP Enterprise Wireless Design ENWLSD 300-425 and Implementation ENWLSI 300-430 Official Cert Guide