Free Cisco 300-430 Practice Exam with Questions & Answers | Set: 4

The primary change to the network when adding APs for location-based services, such as VolMLAN, would be the AP footprint. This refers to the physical coverage area of the access points. Increasing the AP footprint enhances the ability to perform location-based services by improving the accuracy of triangulation and location tracking of devices. This is because a denser AP footprint allows for more precise determination of a device’s location within the network. References: CCNP Enterprise Wireless Design ENWLSD 300-425 and Implementation ENWLSI 300-430 Official Cert Guide, specifically the sections discussing location-based services and AP deployment strategies for optimal coverage and location tracking.

 Link-Local Service (LSS) filtering for mDNS (Multicast Domain Name System) is used to control the propagation of mDNS services across the network. To enable LSS for the AppleTV mDNS service only when ORIGIN is set to Wired, the correct action is to set ORIGIN to Wired and enable LSS specifically for the AppleTV service. References: CCNP Enterprise Wireless Design ENWLSD 300-425 and Implementation ENWLSI 300-430 Official Cert Guide

AutoQoS simplifies the deployment of QoS by automating the process. On the Cisco Catalyst 9800 Series Wireless Controller, AutoQoS takes into account the characteristics of wireless traffic and helps in implementing a consistent QoS policy across both wired and wireless parts of the network. References: CCNP Enterprise Wireless Design ENWLSD 300-425 and Implementation ENWLSI 300-430 Official Cert Guide.

When configuring access control on a WLC using a TACACS+ server for centralized authentication on network devices, the role value that must be configured under the shell profile on the TACACS+ server for a user with read-only permissions is “MONITOR”. This role restricts the user to monitoring functions without the ability to make changes to the configuration. References := (CCNP Enterprise Wireless Design ENWLSD 300-425 and Implementation ENWLSI 300-430 Official Cert Guide)

When an IT department needs to locate a stolen laptop using its MAC address, enabling Location History for Clients on the Mobility Services Engine (MSE) is crucial as it allows for historical tracking of client devices’ locations. Furthermore, Client location tracking must also be enabled on the MSE; this feature actively tracks and updates the current position of all client devices in real-time. Both settings are necessary to provide a comprehensive view of where the laptop has been over time and its current location within the wireless network’s coverage area. References := ( CCNP Enterprise Wireless Design ENWLSD 300-425 and Implementation ENWLSI 300-430 Official Cert Guide )

If the Cisco 5520 Series Wireless LAN Controller is no longer manageable via the network after implementing a CPU ACL, permit statements must be added to the top of the ACL in both directions (A). These statements should specify the network from which management is allowed and the virtual interface of the controller to ensure proper management access. References: CCNP Enterprise Wireless Design ENWLSD 300-425 and Implementation ENWLSI 300-430 Official Cert Guide

The Voice VLAN feature on switches allows the network to distinguish between voice traffic and data traffic from wireless clients connected to IP phones. This is crucial for applying the appropriate QoS to ensure that voice traffic is prioritized over client data traffic. References: CCNP Enterprise Wireless Design ENWLSD 300-425 and Implementation ENWLSI 300-430 Official Cert Guide.

 To ensure the 1810 OEAP can join the controller from remote teleworker locations, the firewall must allow specific UDP ports that are used for AP communication with the controller. UDP ports 5246 and 5247 are used for Control and Provisioning of Wireless Access Points (CAPWAP) control and data messages, while UDP ports 12222 and 12223 are used for OfficeExtend APs’ data traffic. Blocking these ports would prevent the APs from joining the controller, hence they must be allowed on the firewall.

Mobile Device Management (MDM) integration with Cisco ISE increases security for lost devices by providing functions such as data wipe and jailbreak/root detection. Data wipe allows the remote erasure of sensitive information from lost devices, preventing unauthorized access. Jailbreak/root detection helps identify compromised devices that may bypass standard security measures, ensuring that they do not access network resources.

To ensure reliable streaming of video content on the wireless network between Cisco FlexConnect APs, Multicast Direct must be enabled. This feature allows for efficient multicast traffic delivery by converting multicast streams into unicast streams for each client, which guarantees delivery even in environments where reliable multicast is not feasible. References := CCNP Enterprise Wireless Design ENWLSD 300-425 and Implementation ENWLSI 300-430 Official Cert Guide