Free Cisco 300-430 Practice Exam with Questions & Answers | Set: 8

For optimal voice over WLAN performance with a Cisco 8821 wireless phone, the Cisco recommended configuration is to set the switch port to access mode and trust the DSCP markings. This ensures that voice traffic is appropriately prioritized in the network, providing better quality of service for voice communications. References: CCNP Enterprise Wireless Design ENWLSD 300-425 and Implementation ENWLSI 300-430 Official Cert Guide

 For a wireless network supporting voice and video applications for Apple devices, especially with Fastlane implementation, the QoS profile to configure on the user WLAN for iPhones updated to version 14.5.432302546 is Platinum. This profile provides the highest level of QoS, ensuring priority for voice and video traffic. References:= (CCNP Enterprise Wireless Design ENWLSD 300-425 and Implementation ENWLSI 300-430 Official Cert Guide)

The correct command to add a VLAN with a specific ID to a FlexConnect group in a Cisco Wireless LAN Controller (WLC) is ‘config flexconnect group BranchA-FCG vlan 30 add’. This command specifies the FlexConnect group name ‘BranchA-FCG’ and the VLAN ID ‘30’, followed by the action ‘add’, which is consistent with Cisco’s CLI syntax for WLC configuration. References: CCNP Enterprise Wireless Design ENWLSD 300-425 and Implementation ENWLSI 300-430 Official Cert Guide

In Cisco ISE version 2.1 for BYOD with a Single SSID setup, 802.1x must be configured to provide the necessary layer of security and to facilitate the device registration process. 802.1x authentication allows for the use of EAP (Extensible Authentication Protocol) to authenticate users before they can access the network. This ensures that only authorized devices can join the BYOD network, providing a secure method for device onboarding and access control. References: CCNP Enterprise Wireless Design ENWLSD 300-425 and Implementation ENWLSI 300-430 Official Cert Guide

In Cisco Wireless LAN Controller (WLC) environments, the feature that allows for different usernames and passwords for administrative support on specific APs is the local management users. This feature enables the configuration of unique credentials on individual APs, separate from the global credentials used for the rest of the network. By enabling local management users, the APs in the CEO’s office can have distinct administrative access controls, ensuring a higher level of security and customization. References: CCNP Enterprise Wireless Design ENWLSD 300-425 and Implementation ENWLSI 300-430 Official Cert Guide.

The maximum time range that can be viewed on the Cisco DNA Center issues and alarms page is 24 hours. This allows network administrators to monitor and troubleshoot recent issues and alarms within a one-day period. References := (CCNP Enterprise Wireless Design ENWLSD 300-425 and Implementation ENWLSI 300-430 Official Cert Guide)

For location analytics in a shopping center using AireOS controllers with Cisco Wave 2 APs, the CMX server settings must exclude probing clients to track only associated clients. This setting ensures that the location analytics data reflects the movements of clients that are actively connected to the WLAN, providing accurate insights into popular areas within the shopping center. References: CCNP Enterprise Wireless Design ENWLSD 300-425 and Implementation ENWLSI 300-430 Official Cert Guide

For guests to reach a Web Authentication Redirect page while blocking web management traffic to the controller, guest client HTTPS traffic must be allowed to a specific IP address that does not interfere with management access. The virtual interface IP on a Cisco Wireless LAN Controller serves as a DHCP relay and is used for web authentication processes. Therefore, allowing HTTPS traffic to this IP enables guests to reach the redirect page without granting them access to manage the controller. References: CCNP Enterprise Wireless Design ENWLSD 300-425 and Implementation ENWLSI 300-430 Official Cert Guide

Before deploying an OEAP successfully, the IT administrator must configure the AP mode to FlexConnect and check the box for Office Extend AP ©, and configure the Primary Controller Name and Management IP address in the High Availability tab (E). These settings ensure that the OEAP can establish a connection to the WLC and function correctly in a remote user’s home. References: CCNP Enterprise Wireless Design ENWLSD 300-425 and Implementation ENWLSI 300-430 Official Cert Guide.

 Configuring an AVC profile for the Jabber traffic and applying it to the WLAN ensures that voice traffic from Cisco Jabber receives Platinum QoS while keeping other WLAN traffic at Silver class. AVC allows for deep packet inspection which can identify Jabber application packets so they can be given priority over other types of traffic.