Free CIPS L4M2 Practice Exam with Questions & Answers | Set: 2

Explanation

An Outcome Based Specification (OBS) focuses on the desired outcome of a service in business terms, rather than a detailed technical specification of how the service is to be provided; this allows providers scope to propose innovative solutions that might not have occurred to the procurement team. Outcome should be distinguished from output, which is the measurable results of a set of inputs. The example of difference between outcome and output is written at the bottom of page 123 in the study guide.

Outcomes should be the starting point in making new specification. However, using outcome-based specification has some setbacks:

- First, it is not easy to measure the outcomes. Usually, outcome of a project is a statement like 'increase customer satisfaction', 'maintain ambient temperature' or 'provide a convenient way to do something'. They are not easy to measure as output.

- Second, sometimes the desired outcomes require time to be materialised

- Third, outcomes can be ambiguous

Explanation

Value Engineering (VE) is concerned with new products. It is applied during product development. The focus is on reducing costs, improving function or both, by way of teamwork-based product evaluation and analysis. This takes place before any capital is invested in tooling, plant or equipment.

This is very significant, because according to many reports, up to 80% of a product’s costs (throughout the rest of its life-cycle), are locked in at the design development stage. This is under-standable when you consider the design of any product determines many factors, such as tooling, plant and equipment, labour and skills, training costs, materials, shipping, installation, maintenance, as well as decommissioning and recycle costs.

The Kano model is a theory for product development and customer satisfaction developed in the 1980s by Professor Noriaki Kano, which classifies customer preferences into five categories. Both Kano model and Value Engineering aims at optimising new product, so they can be combined to-gether. CIPS L4M2 study guide consider Kano model is a tool of Value Engineering

Example of Kano model (source: Wikipedia)

Explanation

Regression refers to a quantitative measure of the relationship between one or more independent variables and a resulting dependent variable. Regression is of use to professionals in a wide range of fields from science and public service to financial analysis.

To perform a regression analysis, a statistician collects a set of data points, each including a com-plete set of dependent and independent variables. For example, the dependent variable could be a firm’s stock price and the independent variables could be the Standard and Poor’s 500 index and the national unemployment rate, assuming that the stock is not listed in the S&P 500. The sample set could be each of these three data sets for the past 20 years.

On a chart, these data points would appear as scatter plot, a set of points that may or may not appear to be organized along any line. If a linear pattern is apparent, it may be possible to sketch a line of best fit that minimizes the distance of those points from that line. If no organizing axis is visually apparent, regression analysis can generate a line based on the least squares method. This method builds the line which minimizes the squared distance of each point from the line of best fit.

Line of best fit is one of the most important outputs of regression analysis.

Explanation

Overhead variances arise when the actual overhead costs incurred differ from the expected amounts. Managers want to understand the reasons for these differences, and so should consider computing one or more of the overhead variances described below. Each of these variances applies to a different aspect of overhead expenditures. It is not necessary to calculate these variances when a manager cannot influence their outcome.

Fixed Overhead Spending Variance

The fixed overhead spending variance is the difference between the actual fixed overhead expense incurred and the budgeted fixed overhead expense. An unfavorable variance means that actual fixed overhead expenses were greater than anticipated. The formula for this variance is:

Actual fixed overhead - Budgeted fixed overhead = Fixed overhead spending variance

The amount of expense related to fixed overhead should (as the name implies) be relatively fixed, and so the fixed overhead spending variance should not theoretically vary much from the budget.

Fixed Overhead Volume Variance

The fixed overhead volume variance is the difference between the amount of fixed overhead actually applied to produced goods based on production volume, and the amount that was budgeted to be applied to produced goods. For example, a company budgets for the allocation of $25,000 of fixed overhead costs to produced goods at the rate of $50 per unit produced, with the expectation that 500 units will be produced. However, the actual number of units produced is 600, so a total of $30,000 of fixed overhead costs are allocated. This creates a fixed overhead volume variance of $5,000.

Variable Overhead Efficiency Variance

The variable overhead efficiency variance is the difference between the actual and budgeted hours worked, which are then applied to the standard variable overhead rate per hour. The formula is:

Standard overhead rate x (Actual hours - Standard hours)

= Variable overhead efficiency variance

A favorable variance means that the actual hours worked were less than the budgeted hours, resulting in the application of the standard overhead rate across fewer hours, resulting in less expense being incurred. However, a favorable variance does not necessarily mean that a company has incurred less actual overhead, it simply means that there was an improvement in the allocation base what was used to apply overhead.

Variable Overhead Spending Variance

The variable overhead spending variance is the difference between the actual and budgeted rates of spending on variable overhead. The variance is used to focus attention on those overhead costs that vary from expectations. The formula is:

Actual hours worked x (Actual overhead rate - standard overhead rate)

= Variable overhead spending variance

A favorable variance means that the actual variable overhead expenses incurred per labor hour were less than expected.

In the study guide, CIPS splits overhead variance into volume and expenditure variance. They can be understood as variable and fixed overhead variance respectively.

Explanation

Main risks involved in an under-specified requirement

• The product or service is not fit for use since it does not match the actual needs

• Higher cost due to corrections or reworks (proposal evaluations, scope or work monitoring, change in insulation materials or systems, reduced productivity, etc.).

• Higher operating cost on many fronts: process control, energy consumption, maintenance, etc.

• Other problems like corrosion under insulation, mold development, safety-related concerns, etc.

LO 3, AC 3.3

Explanation

The buyer won't pay the supplier until next month. This is a liability to the buyer. This amount can be recorded as accrued expense or accounts payable. On the other hand, the supplier has not sent the invoice, so it should be accrued expense.

Both accounts payables and accrued expenses are liabilities. Accounts payable is the total amount of short-term obligations or debt a company has to pay to its creditors for goods or services bought on credit. With accounts payables, the vendor's or supplier's invoices have been received and recorded.

On the other hand, accrued expenses are the total liability that is payable for goods and services that have been consumed by the company or received. However, accrued expenses are those bills in which an invoice or bill has not yet been received. As a result, accrued expenses can sometimes be an estimated amount of what's owed, which is adjusted later to the exact amount, once the invoice has been received.

Conversely, accounts payable should represent the exact amount of the total owed from all of the invoices received.

Explanation

Direct costs are directly associated with the production of a good or service. In this question, 'An employee is hired to work on a project, either exclusively or for an assigned number of hours' and 'Raw materials' are directly related to producing the product.

Indirect costs are the general costs of the organisation - these costs cannot easily be attributed to specific products or services (also known as overheads). 'The materials and supplies needed for the company’s day-to-day operations' or 'Clerical assistants who maintain the office' or 'Advertising and marketing communication' is example of indirect cost.

Explanation

According to Investopedia, the financial services sector provides financial services to people and corporations. This segment of the economy is made up of a variety of financial firms includ-ing banks, investment houses, lenders, finance companies, real estate brokers, and insurance com-panies. As noted above, the financial services industry is probably the most important sector of the economy, leading the world in terms of earnings and equity market capitalization. Large conglomerates dominate this sector, but it also includes a diverse range of smaller companies.

According to the finance and development department of the International Monetary Fund (IMF), financial services are the processes by which consumers or businesses acquire financial goods. For example, a payment system provider offers a financial service when it accepts and transfers funds between payers and recipients. This includes accounts settled through credit and debit cards, checks, and electronic funds transfers.

Companies in the financial services industry manage money. For instance, a financial advi-sor manages assets and offers advice on behalf of a client. The advisor does not directly provide investments or any other product, rather, they facilitate the movement of funds between savers and the issuers of securities and other instruments. This service is a temporary task rather than a tangible asset.

Financial goods, on the other hand, are not tasks. They are things. A mortgage loan may seem like a service, but it's actually a product that lasts beyond the initial provision. Stocks, bonds, loans, commodity assets, real estate, and insurance policies are examples of financial goods.