Free USGBC LEED-AP-BD+C Practice Exam with Questions & Answers | Set: 12

The LEED Platinum certification requires the project to achieve exemplary performance in at least one credit that allows it, as specified in the LEED Reference Guide1. One of the credits that meets this criterion is the Indoor Environmental Quality Credit, which focuses on providing healthy and comfortable indoor environments for occupants. The credit has two options: Quality Views and Enhanced Commissioning. Quality Views requires the project to have windows that provide views of natural scenery or water bodies, which can enhance the well-being and satisfaction of occupants. Enhanced Commissioning requires the project to have a comprehensive commissioning plan that ensures all systems are properly installed, tested, and operated before occupancy. Both options can help reduce energy consumption, improve indoor air quality, and create a positive sensory experience for occupants.

Source control is one of the control measures recommended by the Sheet Metal and Air Conditioning National Contractors Association (SMACNA) for the Indoor Environmental Quality Credit, Construction Indoor Air Quality Management Plan. Source control means minimizing the generation and emission of indoor air pollutants from the construction activities and materials. Some examples of source control are1:

•Using low-emitting adhesives, sealants, paints, coatings, and flooring systems that comply with the VOC limits of the applicable LEED credit.

•Storing absorptive materials in a protected area and covering them with plastic sheeting to prevent moisture and mold growth.

•Scheduling the installation of finish materials after the completion of wet and dusty work, such as concrete pouring, drywall sanding, and painting.

•Isolating work areas where high levels of contaminants are generated or used, such as welding, cutting, grinding, and solvent cleaning, and providing adequate ventilation and exhaust.

•Prohibiting smoking, eating, and drinking in the work areas, and providing designated areas for these activities.

The percentage of diverted waste for Materials and Resources Credit, Construction and Demolition Waste Management is calculated by dividing the total weight of diverted materials by the total weight of waste generated1. Diverted materials are those that are reused, recycled, salvaged, or donated2. In this case, the total weight of diverted materials is:

8 tons (7.3 tonnes) of recycled demolition steel and concrete

6 tons (5.4 tonnes) of used furniture donated to a non-profit organization

1 ton (0.9 tonnes) of removed carpet and ceiling tiles sent back to the manufacturer

40% of 3 tons (2.7 tonnes) of commingled scrap, which is 1.2 tons (1.1 tonnes)

The sum of these weights is 16.2 tons (14.7 tonnes). The total weight of waste generated is 20 tons (18.1 tonnes). Therefore, the percentage of diverted waste is:

(16.2 / 20) x 100 = 81%

However, the credit allows for a 10% adjustment for vegetative waste, which is not considered a building material3. Therefore, the percentage of diverted waste after adjustment is:

(81 - 10) = 71%

The closest answer option to this value is B. 75%.

Construction and Demolition Waste Management

Construction Waste Management

Construction and Demolition Waste Management - Canada Green Building Council

The Location and Transportation Credit, Green Vehicles aims to reduce transportation-related greenhouse gas emissions by promoting the use of low-emitting, fuel-efficient, and alternative-fuel vehicles1. One of the requirements for this credit is to provide preferred parking for green vehicles for 5% of the total vehicle parking capacity of the project1. Preferred parking is defined as parking that is clearly marked and located in the most convenient spaces available to the driver or nearest to the main entrance of the project2. In addition to providing preferred parking, the project may also offer one or more incentives to encourage the use of green vehicles, such as a discounted parking rate, free parking passes, or rebates for parking fees3. The question asks what incentive may be provided to meet the requirements and highlight the project sustainable vehicle strategy. The correct answer is C. A permanent discounted parking rate of at least 20% for all green vehicles, because this incentive meets the minimum threshold of 20% discount suggested by the LEED Reference Guide for Building Design and Construction3, and it also demonstrates the project’s commitment to supporting green vehicles in the long term. The other options are either not sufficient or not relevant for this credit. Option A. Three years of free parking for green vehicles is not sufficient because it is not permanent and may not be attractive enough for drivers to switch to green vehicles. Option B. Preferred parking decals for 5% of occupants utilizing carpool vehicles is not relevant because it does not address green vehicles, but rather carpool vehicles, which are covered by a different credit (Location and Transportation Credit, Reduced Parking Footprint)4. Option D. An annual maintenance voucher for at least 5% of occupants driving green vehicles is not sufficient because it is not directly related to parking and may not be a significant incentive for drivers.

Green Vehicles

Green Vehicles - Canada Green Building Council

[LEED Reference Guide for Building Design and Construction v4], page 544

Reduced Parking Footprint

This option requires the project to provide safe collection, storage, and disposal for electronic waste, such as computers, monitors, printers, and batteries, because it contains hazardous materials that can harm human health and the environment if not handled properly1. Electronic waste can be recycled or reused by certified e-waste recyclers or manufacturers2.

The commissioning process is a quality assurance process that ensures that the building systems perform as intended, based on the owner’s project requirements and the design team’s basis of design.The commissioning process can provide value to the project by improving energy efficiency, reducing operation and maintenance costs, enhancing occupant comfort and satisfaction, and reducing risks and liabilities123.References: LEED BD+C Reference Guide, Energy and Atmosphere, page 631; LEED BD+C Reference Guide, Enhanced Commissioning, page 661;LEED Building Commissioning: Why You Should Get Accredited

A high-performance building envelope should be prioritised because permanent reductions in heating and cooling demand improve efficiency and resilience under both normal and emergency conditions. Effective insulation, air sealing, high-performance glazing, solar control, and reduced thermal bridging lower peak loads and allow mechanical systems, renewable generation, batteries, and backup systems to be smaller and more effective. During an outage, a well-designed envelope also slows indoor temperature change and extends passive survivability. Demand-response participation helps the utility manage peak demand but does not correct excessive underlying building loads. Renewable Energy Certificates address the environmental attributes of purchased electricity but do not reduce actual consumption or improve physical resilience. Load reduction should therefore precede demand management and energy procurement.LEED v5 prioritises energy efficiency, decarbonisation, and resilience.

For the small commercial building described, the applicable requirement is whole-building energy-use monitoring for each energy source at least monthly. This establishes a basic record of electricity, natural gas, district energy, fuel oil, or other energy supplied to the building. Fifteen-minute electricity monitoring represents a much more granular interval and is not the stated minimum for this building-size condition. End-use submetering separately measures categories such as lighting, HVAC, plug loads, and service water heating and is generally associated with more extensive monitoring provisions rather than the basic small-building requirement presented here. Monthly whole-building data enables owners to benchmark performance, identify abnormal changes, compare actual use with forecasts, and support ongoing energy-management activities. Therefore, Option C correctly describes the required monitoring level.

================

Sustainable Sites (SS) Credit: Light Pollution Reductionaddresseslight trespass, glare, and skyglow, ensuring that a project:

Minimizes unnecessary outdoor lightingto prevent disruption to surrounding properties.

Uses full-cutoff fixturestodirect light downwardandreduce nighttime skyglow.

Follows lighting zone guidelinesbased on project location.

Thispromotes dark-sky compliance and reduces light pollution, benefiting ecosystems and human health.

(Source: Official LEED BD+C Reference Manual)

LEED v5 MRc1: Building and Materials Reuse expressly includes existing building structure such as floor decking and roof decking, along with applicable enclosure elements, in the Building Reuse calculation. Consequently, floor decking is directly eligible. Hazardous building portions must be excluded from calculations, so asbestos-containing insulation cannot be counted as qualifying reused material. Earlier and current LEED guidance also distinguishes structural roof decking from nonstructural roofing materials such as roofing membranes; the latter do not qualify as structural reuse. Window assemblies and exterior glazing are likewise excluded from the applicable enclosure calculation methodology. The current LEED v5 Reference Guide explicitly identifies floor decking as a qualifying structural component and confirms that structurally unsound or hazardous portions must be excluded. Therefore, Option C is the correct answer.

================