Free Nutanix NCS-Core Practice Exam with Questions & Answers | Set: 3

When converting a cluster from ESXi to AHV and encountering warnings about network adapter configurations in VMware vCenter, it is crucial to ensure that the network adapters are homogeneous to avoid issues with network performance and reliability. Keeping homogeneous adapters as active and standby ensures that all active and standby adapters operate at the same speed and capabilities, which is essential for maintaining consistent network performance and failover capabilities. This setup helps in avoiding conflicts or performance penalties that can arise from using mixed adapter types under the same virtual switch environment.References: VMware vCenter documentation, Nutanix AHV Networking Guide.

To verify that a Nutanix cluster can tolerate a single-node failure, the consultant should use the command nutanix@cvm~$ ncli cluster get-domain-fault-tolerance-status type=node. This command is executed from the Controller Virtual Machine (CVM) and checks the cluster's fault tolerance status specifically for node failures, providing insights into how the cluster's data resiliency and redundancy configurations are holding up against potential single-node failures.References: Nutanix CLI Guide, Nutanix Fault Tolerance Documentation.

When migrating an ESXi host to a vSphere Distributed Switch (vDS), it's crucial to correctly configure network adapters, including those for the Controller Virtual Machine (CVM). If the consultant migrated both the CVM backplane and the VM network adapter to the vDS, this could disrupt host-to-CVM connectivity if not configured correctly on the vDS. Such a setup requires precise configuration of network settings and VLAN tags to maintain seamless connectivity and avoid communication alerts in Prism Element.

To ensure additional resiliency in a 20-node ESXi deployment capable of surviving the concurrent loss of two nodes, the consultant should configure the system with a storage reservation and HA (High Availability) admission control each set to 5%, combined with a cluster redundancy factor (RF) of 3. RF3 provides the capability to tolerate the failure of up to two nodes without data loss, thus enhancing the cluster's resilience. This configuration is optimal for maintaining cluster availability and integrity during multiple node failures.References: Nutanix Bible, Nutanix University

To execute the command manage_ovs --bridge_name br0 show_uplinks in a Nutanix cluster, the appropriate prompt is:

• A. nutanix@CVM-$: This command is intended for execution within the Controller Virtual Machine (CVM) environment, and "nutanix@CVM-$" is the standard user prompt in the CVM where such network commands are run.

References:

• Nutanix Bible (https://www.nutanixbible.com), especially sections on managing virtual bridges and networking commands.
• Nutanix University: NCS-Core 6.8 Training (https://university.nutanix.com), which includes details on command-line operations within the CVM.

If the Foundation VM fails to boot and other methods need to be considered, the best alternative is the Foundation Applet. This lightweight tool runs on a laptop or other device and doesn't require booting a VM, providing a straightforward method to image Nutanix hardware, particularly useful in situations where hardware constraints or other issues prevent the use of a full Foundation VM.

References:

• Nutanix Foundation Installation Guide: Nutanix Documentation
• Nutanix Field Installation Guide and Tools Overview

Before expanding the cluster with the new NX-3235-G9 block, it is critical to ensure that all components are running supported and recommended versions due to compatibility and support issues. Therefore, the necessary actions include: A. Upgrade vCenter, AOS, and ESXi to supported and recommended versions. This step ensures compatibility across all components, particularly important as the new G9 hardware does not support the currently installed version of ESXi. Upgrading these components will also ensure continued vendor support and the stability of the environment. Options B, C, and D do not adequately address the need for vCenter upgrades or the fact that ESXi 6.7 U3b is unsupported for G9, highlighting the necessity for a comprehensive upgrade.References: Nutanix Hardware Compatibility List, Nutanix Support Portal.

When Foundation reports an error indicating the ISO is not supported:

• Option B: Checking the MD5 checksum of the ISO file ensures that it matches the expected value listed by Nutanix, confirming the file's integrity and compatibility.
• Option D: Downloading and updating the iso whitelist.json from the Nutanix Support Portal ensures that Foundation has the latest information on supported ISO files, potentially resolving compatibility issues.

References:

• Nutanix Bible (https://www.nutanixbible.com), especially sections on Foundation and ISO troubleshooting.
• Nutanix University: NCS-Core 6.8 Training (https://university.nutanix.com), which covers the setup and troubleshooting of Foundation.

Ref: https://next.nutanix.com/how-it-works-22/redundancy-factor-vs-replication-factor-37486