Free HP HPE0-S59 Practice Exam with Questions & Answers

HPE Composer 2 has 128GB of memory and 4 AMD CPUs to improve performance of me management system

HPE Composer 2 modules are required to manage HPE virtual Connect SE 100GD F32 Modules for Synergy

The administrator can access an HPE Synergy Composer 2 appliance remotely to perform First Time Setup

A pair of HPE Composer 2 modules can manage 42 frames, compared to 21 frames managed by HPE Composer

It supports 2 to 8 sockets in 2-socket increments.

it cannot be managed using HPE OneView.

It must be equipped with at least 768 GB of memory.

It can support up to two nPars with an external RMC.

The customer can add a new logical enclosure to the existing setup because the maximum number of logical enclosures in a single management ring is not reached.

The customer has to expand the management ring capacity either by adding HPE Composer 2 modules or adding memory to reach 128GB per module.

The customer has to create a new management ring for new logical enclosure because the maximum number of frames m a single management ring is reached.

The customer can add a new logical enclosure to an existing setup once all required licenses are added to HPE OneView and associated with the new frames.

It can be used to verify compatibility of a given Synergy Service Pack with a specific version of HPE OneView.

It can be used to evaluate the health of an HPE OneView appliance before proceeding with an appliance update.

It can be used to examine the firmware version installed on compute nodes and compliance with HPE OneView version.

It can be used to determine whether the latest milestone HPE OneView edition is currently installed.

Changing this parameter to VM Migration will give higher priority for vMotion traffic.

Changing this parameter does not affect the behavior of the network or traffic.

If VM Migration is selected, all types of traffic other than vMotion will be blocked.

This parameter will allow an administrator to define a VMkernel port.

Create a new logical interconnect group and enclosure group for two frames setup

Create a new logical enclosure based on both HPE Synergy frames.

Re-parent an existing enclosure group to the new logical interconnect group.

Modify an existing logical interconnect to include second HPE Synergy frame.

Move one of the master modules to the appropriate interconnect bay in the second frame.

The 12Gb SAS modules required for D3940 connectivity can only be installed in the first fabric.

To use the storage controller that will access D3940 storage modules, a second CPU must be installed.

For VMware vSAN deployment, all drives in the D3940 storage modules must be SSD drives.

All drives in the D3940 storage modules must formulate a single logical drive with RAID5 configured

vSphere licenses should be added, as vSAN licenses do not replace vSphere licenses

vSphere Standard licenses should be replaced with Enterprise Plus licenses to enable vSAN

One HPE Virtual Connect SE 100Gb F32 Module for Synergy should be replaced with 50GD/S ILM

20 SSD drives should be removed from this setup, as D3940 supports only 20 SSD or SAS drives.

HPE ProLiant DL380 Gen 10 Plus

HPE Synergy 480 Gen10 Plus

HPE ProLiant DL560 Gen10

HPE Superdome Flex 280

if both FiexNICs are configured with the same speed

If the logical enclosure is built on at least three HPE Synergy frames

if both FiexNICs are connected to different networks

if the logical enclosure is configured with redundant master modules