Free Cisco 300-425 Practice Exam with Questions & Answers | Set: 8

In a mobility group design, it is essential that all Wireless LAN Controllers (WLCs) share the same mobility domain name to ensure seamless client mobility and roaming between WLCs. This allows for clients to be recognized across the network and maintain their sessions as they roam. Additionally, when WLCs are in a Stateful Switch Over (SSO) high availability pair, they must use the same virtual IP address to present a single network entity to the wireless clients, ensuring uninterrupted service in the event of a failover.

 The Cisco Aironet 3800 Series APs support mGig, which allows for higher throughput over existing cabling. However, the maximum cable length that supports 5G operation is limited by the quality of the cable and signal attenuation. Category 5e cabling can support 5G operation up to a length of 130 meters, which is within the acceptable range for maintaining the required signal integrity for 5G speeds.

 To predict the number of APs needed to support approximately 300 wireless devices on a new floor with an 802.11ac network, the Demand Settings in the Cisco Prime Infrastructure Planning Tool must be adjusted. This setting allows the planner to specify client density and throughput requirements, which are crucial for determining the correct number of APs.

FlexConnect APs must be in a FlexConnect group to support 802.11r Fast Transition (FT). This grouping allows for local authentication and key management, which are necessary for fast roaming methods that improve voice quality and wireless IP phone performance during roaming.

To address aesthetic concerns, using enclosures can effectively conceal wireless infrastructure, such as access points, within the environment. This helps maintain the visual appeal of the area while still providing the necessary wireless coverage.

 For a government agency requiring high security between device communications, enabling Mobility Encryption across the network is essential. Mobility Encryption enhances the security of the mobility group by encrypting the traffic exchanged between mobility peers, including AireOS, Cisco IOS-XE controllers, and Cisco 4800 Series APs. This encryption helps to protect against potential eavesdropping and unauthorized access, ensuring that sensitive government data remains confidential during wireless transmission.

 Cisco FlexConnect mode is designed for branch offices that lack a wired backhaul. It allows APs to switch client data traffic locally while still performing client authentication centrally. This mode provides the flexibility needed for branch deployments, ensuring that client traffic is handled efficiently even if the WAN link to the central site is down. References: Cisco FlexConnect technical documentation and Designing Cisco Enterprise Wireless Networks (ENWLSD) training.

The data path issue between the Cisco Catalyst 9800-CL and AireOS 5520, despite an active control path, is likely due to encrypted mobility being enabled on the AireOS 5520. Encrypted mobility requires both peers to have a matching configuration for encryption, which includes proper certificates and shared secrets. If there’s a mismatch, the control path may be established, but the data path can fail due to the inability to establish an encrypted tunnel.

 In a high-density environment where 5 GHz coverage is provided by nine APs, disabling the 2.4 GHz radios on some APs can reduce co-channel interference because the 2.4 GHz band has fewer non-overlapping channels. This approach helps maintain coverage while mitigating interference.