Summer Special 60% Discount Offer - Ends in 0d 00h 00m 00s - Coupon code: bestdeal

Free CWNP CWDP-304 Practice Exam with Questions & Answers | Set: 5

Questions 41

Why should band steering algorithms allow stations to connect to the 2.4 GHz band after some number of ignored Probe Requests?

Options:
A.

Because the FCC requires it.

B.

Because some clients are persistent clients that will not move on to the 5 GHz band.

C.

Because the 802.11 standard requires it.

D.

Because the AP will experience a buffer overflow if they do not eventually respond with a Probe Response.

CWNP CWDP-304 Premium Access
Questions 42

During a post-validation assessment, you have configured a client for 802.1X/EAP but it is not passing authentication. Which areas should you check in the WLAN configuration?

Response:

Options:
A.

Whether the RADIUS server is online and configured for the matching port on the APs and WLAN controllers

B.

Whether the RADIUS shared secret is properly configured on the supplicant and authentication server

C.

Whether the authenticator is configured to support the EAP type(s) your client is configured for

D.

Whether the client has a fully valid certificate

Questions 43

When viewing channel utilization information from a protocol analyzer, if high channel utilization is occurring, what should you ensure does not exist?

Response:

Options:
A.

A high percentage of low PHY rates

B.

An RF signal generator causing an RF DoS

C.

High levels of workload

D.

High frames per second

Questions 44

If you choose to recommend dynamic channel assignment for the APs in your WLAN design what action should you also recommend'?

Options:
A.

Ensure that the output power of all APs is set to the maximum allowed in the regulatory domain

B.

Ensure that the output power of an APs is set to the minimum available in the system interface

C.

Replace all antennas with panel antennas instead of omnidirectional antennas

D.

Configure the settings used by the dynamic channel assignment algorithm optimally for your design

Questions 45

How are EAP messages transported over 802.11 wireless LANS?

Response:

Options:
A.

EAP-Fast

B.

PEAP

C.

EAPOL

D.

EAP_TLS

Questions 46

During a validation site survey, you realize that the installers mounted some of the APs on the wait when the design called Tor a celling mount. They said that this was done because the cabling company did not have the right tools to run the cables above the ceiling. You know that this will cause a difference in how the Wi-Fi signal will radiate throughout the environment. What should you do in this case?

Options:
A.

Leave it as it is because it will not have a significant impact

B.

Blame the cabling company it the Wi-Fi doesn't work since they didnot do their job correctly

C.

Turn up the power on the APs to accommodate for the difference

D.

Advise the stakeholder that requirements will not be met and a new design process will be needed to meet the requirements

Questions 47

How can you increase efficiency in an 802 11n 2.4 GHz multiple-channel architecture network?

Options:
A.

Disable 802 11b data rates

B.

Use channels 1,3, 5, 7, 9, and 11

C.

Use only channels 1 and 2

D.

Use 40 MHz channels

Questions 48

After designing a WLAN infrastructure using predictive design software. What's the best way to validate the predictive design in the physical space before deployment, if time and budget allow for it?

Options:
A.

Perform an AP-on-a-Stick survey using AP locations based upon the predictive design to confirm each AP's placement.

B.

Deploy all of the APs as they're shown in the predictive design and perform a passive site survey.

C.

Deploy all of the APs as they're shown in the predictive design and perform an active site survey.

D.

Use a client device positioned where the APs will be installed and measure the signal from the client device.

Questions 49

When live video streaming solutions that transmit simultaneously to more than one recipient are used, what special capability should be

considered and configured in all affected WLAN implementations?

Options:
A.

IPSec

B.

IPv6

C.

Multicasting

D.

Secure TCP

Questions 50

What document should be created that provides instructions for install technicians to mount and configure APs?

Options:
A.

Hold Harmless

B.

Statement of Work

C.

Bill of Materials

D.

Physical installation guide

Exam Code: CWDP-304
Certification Provider: CWNP
Exam Name: Certified Wireless Design Professional
Last Update: Jul 15, 2025
Questions: 281