Free CWNP CWDP-304 Practice Exam with Questions & Answers | Set: 4

Name: How to Pass CWDP-304 Exams
Brand: Examstrack
SKU: cwdp-304
Price: 42 USD
Availability: InStock

Questions 31

Who should be in the final meeting from the customer-side after successfully implementing a WLAN infrastructure?

Options:

CEO or CFO

End-users

The customer's customers

Remote workers

CWNP CWDP-304 Premium Access

Claire

24-Jun-2025

examstrack's verified questions and answers are a treasure trove for CWDP-304 candidates. They made my journey easier.

Questions 32

You ate evaluating CO impact in 2 4 GHz. During the post-validation survey, you determine that 2 or 3 APs are seen from every location in the 2 4 GHz band with signal strengths above -75 dBm from all seen Aps. Does this show that CO has been removed from the environment given that three non-overlapping channels exist in 2.4 GHz and why?

Options:

Yes because you would see 3 APs m every location with a signal strength above -75 dBm if CO exists

Yes, because the goal is to see only l AP at each location in 2 4 GHz

No, because CCI can exist even with signals as low as -85 dBm to -93 dBm

No, because the goal is to see only 1 AP at each location in 2 4 GHz

Questions 33

Given:

In your regulatory domain, a Tx Power Level of "1" is equivalent to 17 dBm.

For every integer increment (e.g. from 1 to 2) to the Tx Power Level, the APs transmit power is halved.

In units of mW, what is the actual transmit power for an AP configured at a Tx Power Level of "4"?

Options:

6.25 mW

50 mW

12.5 mW

8 mW

Questions 34

Which of the following items could be considered constraints when performing a network design?(Choose all that apply.)

Options:

Timeline

Personnel

Politics

Budget

Questions 35

While performing a validation site survey, you realize that overlapping channels are being used on the 2.4 GHz bad due to the automatic channel assignment algorithm of the WLAN infrastructure.

What should you do to prevent this?

Options:

Reconfigure the network to use static channel plans because automatic channel assignment algorithms are all broken

Purchase and deploy new APs from a different vendor

Reconfigure the automatic channel assignment settings to use only channels 1, 6, and 11

Leave it as it is; sometimes using all 11 channels in 2.4 GHz gives the optimum performance result

Questions 36

Aesthetics are very important in some environments. What common installation technique can be used to best meet this requirement in a

stadium?

Options:

Painting to match team colors

Using enclosures under the seats or on hand-rails

Mounting on a non-fixed pole

Mounting on the walls

Questions 37

A designer has created a WLAN design that has been implemented in an organization. The network exists in a four-story building Because each floor has an Identical floor plan, the designer designed only one floor and had the installers duplicate the design on each floor. Now. in validation, it is not performing well What best explains the problem caused by this process?

Options:

The result was that APs were above and below each other on the same channel, resulting in excessive CCI The APs should have been deployed so that they were not directly above and below each other and so that they used varying channels between floors

The result was that clients could only connect to APs on their floor and, in a multi-floor deployment, you want clients to connect to APs on other floors in case they roam between floors.

The result was that AC) was increased because the APs were deployed above and below each other on the same channels.

The result was that the frequency utilization was too low for the clients to capture RF waves on which to transmit their signals.

Questions 38

When designing a WLAN to support voice in a large office, which design element is of the highest concern for performance?

Options:

Frequency Selection

Roaming

AP vendor

Band steering

Questions 39

A controller-based WLAN infrastructure has its controller on a different subnet than its APs. What device must be used to enable any

communication between the

Controller and the APs?

Options:

NTP server

Router

PoE Layer 2 switch

Wireless bridge

Questions 40

An AP vendor being considered for a WLAN deployment suggests that their 2 4 GHz and 5 GHz dual-band APs use software defined radios What unique capability does this indicate in comparison to non-software defined radios?

Options:

At least one radio can be configured for either 2 4 GHz or 5 GHz operations

The radios can have their SSlDs configured through software

Software is used to configure the encryption settings

Software is used to configure the entire WLAN profile