Free Cisco 350-801 Practice Exam with Questions & Answers | Set: 3

under device profiles in device settings

in in-service parameters

under regions using preference lists

in enterprise parameters

voice codec

session capacity of the PVDM module

number of protocol data units

software version Of the router

license types

G722/8000

Telephone-event/8000

G7221/16000

PCMA/8000

A limit of 900 kb is the total amount of bandwidth used for the sum of calls. The use of compression does not impact the amount of calls because only the codec definition is considered when calculating the CAC in Cisco UCM

A limit of 900 kb is the total amount of actual used RTP traffic so the oversubscription can be done for multiple calls adding its maximum RTP stream requirements.

A limit of 900 kb is the total amount of bandwidth used for the sum of the media and signaling in the calls The system allows for an actual of 20% overhead of IP packet headers This is to compare the use of ISDN lines with no IP overhead.

A limit of 900 kb is the total amount of bandwidth used for the sum of calls of the defined codec including headers and media traffic

It improves monitoring and troubleshooting.

It determines the least cost path between sites.

It optimizes the minimum required bandwidth.

It ensures the best possible user experience

Video is typically constant bit rate.

Voice and video are the same, so they have the same QoS requirements.

Voice and video traffic are different, but they have the same QoS requirements.

Video is typically variable bit rate.

Cisco Dual Mode for Android

Cisco Unified Client Services Framework

Cisco Dual Mode for iPhone

third-party SIP device

It collects information from callers by playing a series of questions and recording the answers.

It controls outgoing calls by allowing an administrator to specify the numbers that Cisco Unity Connection dials to transfer calls, notify users of messages, and deliver faxes.

It provides access to a corporate directory by playing an audio list that users and outside callers use to reach users and leave messages.

It answers cans, take messages, and provide menus of options.

The analog port failed to register to Cisco UCM with an error code 200.

The MGCP Gateway is not communicating with the Cisco UCM.

The analog port is currently shut down.

The analog port is registered to Cisco UCM.

Create a route group and route list and assign it to the translation pattern.

Create translation pattern 14085551111, called party transform mask 3022.

Change the partition and calling search space on the DID for the specific desk.

Create a route pattern 9.1XXXXXXXXXX and assign it to the trunk.