Spring Sale Limited Time 70% Discount Offer - Ends in 0d 00h 00m 00s - Coupon code: 70track

Free Cisco 350-801 Practice Exam with Questions & Answers | Set: 2

Questions 11

An engineer implements a new Cisco UCM based telephony system per these requirements.

•The local Ethernet bandwidth is sized based on the total bandwidth per call

•A G 736 codec is used.

•The bit rate is 64 kbps

•The codec sample interval is 10 ms

•The voice payload size is 160 bytes per 20 ms

What should the size of the Ethernet bandwidth be per call?

Options:
A.

31.2 kbps

B.

38.4 kbps

C.

55.2 kbps

D.

87.2 kbps

Cisco 350-801 Premium Access
Questions 12

An administrator needs to stop the leading 9 from outbound calls on an IOS Voice Gateway and ensure that the system handles 911 emergency calls Which configuration is needed to accomplish this task?

350-801 Question 12

Options:
A.

Option A

B.

Option B

C.

Option C

D.

Option D

Questions 13

After an engineer runs the utils ntp status command on the Cisco Unified Communications Manager publisher, the stratum value is 16. Which issue can the

Cisco Unified CM cluster experience?

Options:
A.

Unified CM sends an NTPv4 packet.

B.

Database replication is not synchronized on the Unified CM nodes.

C.

The cluster loses access to port 124 at the firewall.

D.

The date/time group on all phones defaults to the time zone of the engineer.

Questions 14

Which actions required for a firewall configuration on a Mobile and Remote Access

through Cisco Expressway deployment?

Options:
A.

The traversal zone on Expressway-c points to Expressway-e through the peer address field on the traversal zone, which specifies the Expressway-e server address. For dual NIC deployments, set the Expressway-e address using an FQDN that resolves the IP address of the internal interface

B.

The external firewall must allow these inbound connections to Expressway: SIP: TCP 5061; HTTPS: TCP 8443; XMPP TCP 5222; media: UDP 36002 to 59999

C.

Do not use a shared address for Expressway-e and Expressway-c, as the firewall

cannot distinguish between them. If static NAT for IP addressing on Expressway-e is used, ensure that any NAT operation on expressway-c does not resolve the same traffic IP address. Shared NAT IS not supported

D.

The internal firewall must allow these inbound and outbound connections between

expressway - c and Expressway-e :sip;HTTPS(tunneled over SSH between C and E.

TCP 2222: TCP 7001: Traversal Media: UDP 2776 to 2777(or 36000 to 36011 for large VM/appliance); XMPP:TCP 7400

Questions 15

What is a capability of a Cisco IOS XE media resource?

Options:
A.

It provides a hardware conferencing solution.

B.

It provides call forwarding capabilities.

C.

It provides redundancy for voice calls.

D.

It provides a voice packet optimization solution.

Questions 16

Refer to the exhibit.

350-801 Question 16

An administrator is configuring a new phone on a Cisco UCM cluster and the phone failed to register. The Cisco UCM cluster is in non-secure mode. Which action resolves the issue?

Options:
A.

Update phone configuration in Cisco UCM with the correct MAC address.

B.

Ensure that DHCP scope has option 150 configured.

C.

Delete phone ITL file.

D.

Manually configure voice VLAN on the phone.

Questions 17

An administrator configures international calling on a Cisco UCM cluster and wants to minimize the number of route patterns that are needed. Which route pattern enables the administrator to match variable-length numbers?

Options:
A.

9.011#

B.

9.011@

C.

9.011!

D.

9.011*

Questions 18

An engineer roust deploy the Cisco Wet*x app to a Windows Virtual Desktop Infrastructure environment that has a roaming database named spark roaming_store stored In a user's AppData\Roaming directory, Which two command line arguments must be used when running the installer? (Choose two.)

Options:
A.

ALLUSERS=0

B.

ENABLEVDI=1

C.

ALLUSERS=1

D.

ENABLEVDI=2

E.

ROAMINGENABLED=1

Questions 19

An engineer is trying to implement a new IP phone system in a company The phones connected to the internal network are reporting a status of "unknown " There is no firewall between the Cisco UCM and the phones What is a possible reason for the unknown status?

Options:
A.

Cisco Discovery Protocol is not enabled, and ping sweep is enabled

B.

DNS is not enabled for the phones

C.

DHCP option 150 is not set up correctly

D.

The IP phone management service is not enabled under Services

Questions 20

What must be modified on the administration page in Cisco UCM when designing layered security?

Options:
A.

phone auto-registration

B.

phones that are on private VLANs

C.

nonstandard TCP ports

D.

access to the phone settings