Free Cisco 300-620 Practice Exam with Questions & Answers | Set: 8

Create an override policy that enables Cisco Discovery Protocol after LLDP is enabled in the default policy group.

Configure a higher order interface policy that enables Cisco Discovery Protocol for the interface on the desired leaf switch.

Configure a lower order policy group that enables Cisco Discovery Protocol for the interface on the desired leaf switch.

Create an interface profile for the interface that disables LLDP on the desired switch that is referenced by the interface policy group.

Transit VLAN

Infrastructure VLAN

Loopback VLAN

Fabric VLAN

Under System -> Faults, right-click on the fault and select Acknowledge Fault so that acknowledged faults will immediately disappear.

Create a stats threshold policy with both rising and falling thresholds defined so that the critical severity threshold matches the squelched threshold.

Under System -> Faults, right-click on the fault and select Ignore Fault to create a fault severity assignment policy that hides the fault.

Create a new global health score policy that ignores specific faults as identified by their unique fault code.

The policy is downloaded and programmed in the hardware policy CAM when the change is implemented on the Cisco APIC.

The policy is programmed in the hardware policy CAM when the policy is downloaded in the leaf software.

The policy is programmed in the hardware policy CAM when the first packet is received through the data path.

The policy is downloaded to the associated leaf switch software when the ESXi host is attached to a DVS.