Free Cisco 300-620 Practice Exam with Questions & Answers | Set: 6

In a Cisco ACI fabric, when a silent host moves from one location to another without notifying the ACI leaf switch (e.g., via Gratuitous ARP), the detection mechanism depends on how the bridge domain is configured. Specifically, ARP flooding can help detect such silent hosts.

In Cisco ACI, the interface lo1023 is assigned as a fabric tunnel endpoint (FTEP). This is a pervasive address found on every leaf and it’s always the same. It is used mostly for AVS (Application Virtual Switch) when the infra VXLAN is extended out of the fabric1. The FTEP is crucial for the internal operation of the fabric, particularly for scenarios where the infrastructure VXLAN needs to be extended outside of the ACI fabric.

References :=

Default IP interfaces on Fabric nodes - Cisco Community1

To extend functional VMM integration to the new group of 70 bare-metal ESXi servers, a separate VMM domain should be implemented using the AEP_VMM. This allows for the management and automation of network policies for the bare-metal servers in a manner similar to the virtualized environment managed by vCenter1.

The type of policy that configures the suppression of faults generated from a port being down is the ‘fault severity assignment’ policy. This policy allows administrators to change the severity of a fault or suppress it altogether, which can be useful for managing expected faults and reducing noise from non-critical events

 To design a method that allows the Cisco ACI to redirect traffic to the firewalls based on specific L4-L7 policy rules and distribute the load across multiple firewalls, the action that must be taken is to Configure ACI Service Graph with Unidirectional PBR (

https://www.cisco.com/c/en/us/solutions/collateral/data-center-virtualization/applicatio n-centric-infrastructure/white-paper-c11-739971.html

To meet the server team’s requirements for VMM integration with ESXi servers, the two enhanced LAG policies that should be configured are:

LB Mode: Destination IP Address and TCP/UDP Port (Option B): This load balancing mode ensures that traffic is evenly distributed across all available links based on the destination IP address and the TCP/UDP port numbers, which can provide a balanced traffic flow for different sessions.

LACP Mode: LACP Active (Option E): Setting the LACP mode to active allows the network switches to initiate the LACP negotiation, which is necessary when the servers are not configured to initiate the LACP process.

These settings ensure that the LAG group consisting of two 10 Gigabit Ethernet links will have traffic evenly distributed across them and that the network switches will initiate the LACP negotiation as required by the server team.

To advertise the 0.0.0.0/0 prefix out on L3Out-2 OSPF, when it is configured as a default static route on L3Out-1, the action that should be taken is to enable the Export Route Control Subnet. This setting allows the default route to be advertised to other L3Outs, enabling the ACI fabric to act as a transit network1.

References :=

ACI Fabric L3Out White Paper - Cisco1

When extending an EPG out of the ACI fabric using static path binding, it is true that external endpoints are in the same EPG as the directly attached endpoints8. This means that traffic received on a statically bound leaf port with a specific VLAN ID is mapped to the EPG, and the same policies applied to directly attached endpoints are enforced on the external endpoints8.

To move the gateway address for VLAN 1001 from the core outside the Cisco ACI fabric into the Cisco ACI fabric and ensure that endpoints in EPG-1001 route traffic to endpoints in other EPGs while minimizing flooded traffic in the fabric, the following configuration set is needed on the bridge domain:

Enable Hardware Proxy: This step involves enabling the hardware proxy feature, which allows the fabric to learn and maintain endpoint information more efficiently7.

Enable Unicast Routing: This step involves enabling unicast routing within the bridge domain, which allows for the routing of traffic between different EPGs and minimizes flooded traffic