Free Huawei H12-891_V1.0 Practice Exam with Questions & Answers | Set: 10

Comprehensive and Detailed In-Depth Explanation:

A. Correct: OPS can use the maintenance assistant to trigger Python scripts periodically or based on events.

B. Correct: OPS supports automatic deployment using Python scripts to download software and configuration files.

C. Incorrect: OPS does not inherently provide local storage for temporarily saving execution results when the network is disconnected. This would require additional programming logic in the script itself, which is not a built-in feature of OPS.

D. Correct: OPS can run scripts to automatically check device health and report the status.

Therefore, the incorrect statement is C.

When port security is enabled and the maximum number of learned MAC addresses is reached, the switch can trigger multiple security actions depending on configuration:

Discard packets with unknown source MACs

Generate alarms

Shut down the port (set to error-down)

Do all the above combined (default behavior)

The most comprehensive and commonly configured behavior is error-down + alarm generation, which corresponds to Option D.

Exact Extract - Huawei HCIE-Datacom Switching Guide:

“When the MAC address limit is reached on a port with port security enabled, the system can generate alarms and set the port to error-down state based on security policies.”

The free mobility solution in Huawei iMaster NCE-Campus allows:

Centralized policy management via the controller

Security group-based policies, decoupled from IPs/VLANs

Automatic policy delivery, no need to configure repeatedly per device

Dynamic mapping of users and IPs via security group subscriptions

Exact Extract - Huawei iMaster NCE-Campus Solution White Paper:

“Free mobility uses security groups and centralized control to enable consistent policy enforcement, avoiding repetitive configurations and simplifying policy management.”

VRRP (Virtual Router Redundancy Protocol) and Flapping

VRRP ensures gateway redundancy by allowing multiple routers to work together as a virtual router. Flapping occurs when the master and backup routers frequently switch roles.

Causes of VRRP Flapping:

✅ A. Too small interval between Advertisement packet transmissions – Can cause flapping

If the Advertisement interval is too short, frequent VRRP state changes can occur.

✅ C. Packet loss on an interface of the backup device – Can cause flapping

If the backup router loses VRRP packets, it might assume the master is down and initiate an election.

✅ D. Flapping on the link transmitting VRRP Advertisement packets – Can cause flapping

If the link used for VRRP experiences instability, packets may be lost, triggering VRRP role changes.

Incorrect Answer Explanation:

❌ B. Inconsistent preemption delay settings – Does NOT cause VRRP flapping

Preemption delay only affects when a router takes over as master after recovering from a failure.

It does not directly cause flapping because the role change happens only after a delay, preventing frequent transitions.

Reference from Huawei HCIE-Datacom Documentation:

Huawei VRRP Configuration Guide – Preventing VRRP Flapping

HCIE-Datacom Study Material – VRRP Timers and Stability

Comprehensive and Detailed Explanation:

IP Source Guard (IPSG) is a Layer 3 security feature used to protect against IP address spoofing by filtering packets based on bound IP-MAC mappings.

Correct Statements:✔ IPSG is a Layer 3 filtering mechanism that checks if the source IP address of a packet matches the learned or configured bindings (Option B).✔ IPSG prevents unauthorized IP address changes by enforcing binding rules (Option C).✔ IPSG defends against IP spoofing attacks by dropping packets from unauthorized sources (Option D).

Incorrect Statement:❌ Option A is incorrect because IPSG does not send alarms to an NMS when an invalid packet is detected. Instead, it drops the packet.

Thus, the correct answer is A.

???? Reference: Huawei HCIE Datacom Security Guide - IP Source Guard (IPSG)

IGP Metric Design in Enterprise WANs

In an enterprise bearer WAN, routing metrics determine path selection. The aggregation layer connects multiple access-layer devices to the core network, so it should have a lower metric to:

✅ Ensure traffic is forwarded through higher-capacity aggregation links instead of lower-bandwidth access links.

✅ Optimize traffic flow, reduce congestion, and improve network efficiency.

✅ Enhance reliability by preferring more stable aggregation links.

IGP Routing Protocols Considerations:

OSPF: Lower cost values indicate preferred paths.

IS-IS: Lower link metrics result in preferred forwarding paths.

Reference from Huawei HCIE-Datacom Documentation:

Huawei IGP Design Guide – Enterprise WAN Routing Optimization

HCIE-Datacom Training Material – Metric Calculation and Path Selection in OSPF/IS-IS