Weekend Special Sale 75% Discount Offer - Ends in 0d 00h 00m 00s - Coupon code: sale75best

Free HP HPE7-A11 Practice Exam with Questions & Answers | Set: 2

Questions 11

Which statement is true regarding device capabilities?

Options:
A.

HPE Aruba Networking’s best practice is to use whatever the AP model supports as a maximum.

B.

You should determine if devices support 2.4 GHz or 5 GHz. No consideration is yet required for 6 GHz as it has yet to be ratified.

C.

Wi-Fi 6E supports 6 GHz for both indoor and outdoor deployments since it was ratified in April of 2020.

D.

HPE Aruba Networking recommends 40-50 devices per radio for a generic office deployment.

HP HPE7-A11 Premium Access
Questions 12

A large multinational financial institution has engaged you to design a new full-stack wired and wireless network for its new 6-story regional office building. The facility’s bottom two floors will be retail space for a large banking branch. The upper floors will be carpeted corporate office space, with each floor approximately 100,000 sq ft (9290 sq m). Data centers are all offsite and are out of scope for this project. The customer is underserved by its current L2-based network infrastructure and wants to use modern best practices in the new design. The network must be fully resilient and fault-tolerant, with dynamic segmentation at the edge.

The retail space will provide public guest Wi-Fi access. Retail associates will use corporate tablets for customer service, with a mix of wired and wireless devices throughout the retail floors. Corporate users will mainly use wireless connectivity, although several wired clients, printers, and hard VoIP phones will also be used.

The customer also plans to renovate the corporate office space to take advantage of 'smart office' technology. These enhancements will enable blue-dot wayfinding, presence analytics, and other location-based services.

The client wants to provide Blue Dot wayfinding for its carpeted office space. The retail floors are not currently in scope.

What is required to ensure the solution is properly licensed?

Options:
A.

Qty 4 Meridian Blue Dot subscriptions

B.

Qty 4 Meridian Map subscriptions Qty 4 Meridian Blue Dot subscriptions

C.

Qty 1 Meridian Blue Dot subscription

D.

Qty 1 Meridian Tracking subscription Qty 1 Meridian Blue Dot subscription

Questions 13

Which statements correctly describe valid high-availability features (VSX or VSF) for AOS-CX switches commonly deployed in enterprise campus environments?

Choose two.

Options:
A.

6200 switches support VSF between all 6200 models in the series.

B.

6000 switches support 2-4 node VSF stacking

C.

9300 switches support VSX clustering

D.

5420 switches support VSX clustering or VSF stacking

Questions 14

A large multinational financial institution has hired you to design a new full-stack wired and wireless network for its new 6-story regional office building. The bottom two floors of the facility will provide retail space for a large banking branch. The upper floors will be carpeted corporate office space, with each floor measuring approximately 100,000 sq ft (9290 sq m). All data centers are offsite and outside this project’s scope. The customer is underserved by its existing L2-based network infrastructure and wants to use modern best practices in the new design. The network must be fully resilient and fault-tolerant, with dynamic segmentation at the edge.

The retail space will provide public guest Wi-Fi access. Retail associates will use corporate tablets for customer service, and the retail floors will contain a mixture of wired and wireless devices. Corporate users will primarily connect wirelessly, although several wired clients, printers, and hard VoIP phones will be used.

The customer also plans to renovate the corporate office space to take advantage of 'smart office' technology. These enhancements will enable blue-dot wayfinding, presence analytics, and other location-based services.

The client has supplied floorplans, wall density, and ceiling heights for the wireless deployment in the carpeted office space.

What additional information is needed to produce an accurate bill of material?

Choose two.

Options:
A.

flooring information

B.

PoE port details

C.

ceiling construction details

D.

sprinkler details

Questions 15

A global cruise line company needs to modernize its existing fleet. It will refresh the ship’s “insides” to improve cost-effectiveness and sustainability, replacing all WLAN/LAN hardware. During this refresh, the company will retain its existing security requirements. The CIO also wants to minimize unused switch ports. Any future expansion will always involve a hardware refresh. The project begins with the smallest ship, which has a maximum of 800 guests.

Each ship has a LAN infrastructure comprising two core switches, up to 10 redundant distribution switches, and up to 500 access switches (400 cabins and 100 technical rooms). The core switches are in the ship’s MDF, and the distribution switches are in the IDFs. Every cabin and technical room receives one access switch.

The ship’s cabling structure will remain unchanged. Each IDF connects to the MDF through SMF, with two pairs available for the interconnect between core and distribution. The SMF distance between MDF and IDF is under 300 meters (980 ft), and it is OS1. Each cabin connects to the IDF through a single OM2 pair, with a maximum distance of 60 meters (200 ft). Each technical room connects to the IDF through a single OM2 pair, with distances from 100 to 150 meters (320 to 500 ft).

For every cabin and technical room, the customer wants to replace the existing fan-less 2530/2540 switches without changing requirements, except that the uplink to the distribution switch must be upgraded to 10GbE to accommodate increased network traffic, and technical rooms require redundant power.

The WLAN infrastructure will be refreshed 1:1, with no new cabling or AP locations. It uses 200/300 series indoor and outdoor APs running InstantOS (fewer than 300 APs), and the customer has no WLAN requirement changes.

The cruise line company will replace its existing Internet connection before the LAN/WLAN refresh. The new Internet connection will provide 99.8% uptime, needed to keep paid guest Wi-Fi operational. With this new Internet connection, the CIO wants to base the design on Aruba’s ESP architecture because the Internet connection is guaranteed.

Based on best practices, what optic type should be recommended for the connection between the IDF and the cabins?

Options:
A.

10G BASE-T SFP+ RJ-45 30 m Cat6A Transceiver

B.

10G SFP+ LC LRM 220 m MMF Transceiver

C.

10G SFP+ LC SR 300 m MMF Transceiver

D.

10G LC BiDi 40 km-D 1330/1270 XCVR

Questions 16

Because of the transport type used between regional data centers, the client is experiencing consistently delayed data transmissions. Response time between the locations remains around 200 ms.

How would this phenomenon be classified?

Original exhibit — Question 8

HPE7-A11 Question 16

Options:
A.

Latency

B.

Jitter

C.

Loss

Questions 17

You are presenting the customer with a replacement collapsed-core network proposal in which the core switches will have switched virtual interfaces (SVIs) configured. The customer is unsure whether a VSX switch pair can serve as the spanning-tree root in its environment.

Which statements about spanning tree and VSX would help assure the customer that a VSX pair is suitable for a collapsed core?

Choose two.

Options:
A.

The ISL between VSX switches is never part of STP domain and doesn't send or receive BPDUs on this link and this ensures the "operational primary" and "operational secondary" switches are deterministic to other dual-attached switches.

B.

Both VSX switches are configured with the system MAC and then create unique STP bridge-IDs to identify "operational primary" and "operational secondary" for proper STP functioning.

C.

HPE Aruba Networking VSX switches support either multiple spanning tree (MSTP) or rapid per VLAN spanning tree (RPVST).

D.

When LAG interfaces are configured on a VSX pair of switches, both switches are "operational primary" and ensure active-active LAG operation equally.

E.

The primary VSX switch is the spanning tree root and the default behavior is the links on the secondary VSX switch are blocked with sub-millisecond failover assured by VSX active-gateway.

Questions 18

A large multinational financial institution has hired you to design a new full-stack wired and wireless network for its new six-story regional office building. The bottom two floors will provide retail space for a large banking branch. The upper floors will be carpeted corporate office space, with each floor approximately 100,000 sq ft (9290 sq m). All data centers are offsite and outside this project’s scope. The customer is underserved by its existing L2-based network infrastructure and wants to use modern best practices in the new design. The network must be fully resilient and fault-tolerant, with dynamic segmentation at the edge.

The retail space will offer public guest Wi-Fi. Retail associates will use corporate tablets for customer service, and the retail floors will contain a mix of wired and wireless devices. Corporate users will primarily connect wirelessly, although several wired clients, printers, and hard VoIP phones will also be used.

The customer also plans to renovate the corporate office space to take advantage of 'smart office' technology. These enhancements will enable blue-dot wayfinding, presence analytics, and other location-based services.

The client wants redundant RADIUS resources in each of its three geographical regions (AMER, EMEA, and APAC). A large office location in each region has sufficient VMware resources available.

Each region has 5,000 clients, all of whom must perform either 802.1x wired or wireless authentication, as well as 802.1x authentication for one personal Wi-Fi device.

All non-personal devices must also validate health with a local agent.

An average of 500 guests are expected to be connected, with a maximum of 700 simultaneous connections using Guest Portal for Internet access.

TACACS authentication will also be configured for a total of 1,200 evenly distributed NADs.

To support virtual IPs and server redundancy in every region, how many Virtual Policy Manager Licenses are required?

Options:
A.

six licenses, C3000V

B.

six licenses, C2000V

C.

three licenses, C3000V

D.

three licenses, C2000V

Questions 19

A global cruise-line company must modernize its existing fleet. It will refresh the ship’s “insides” to reduce cost and improve sustainability, replacing all WLAN/LAN hardware. This refresh will retain the current security requirements. The CIO also wants to minimize unused switch ports. Any future expansion will require a hardware refresh. The company will begin with its smallest ship, which accommodates a maximum of 800 guests.

Each ship has a LAN infrastructure comprising two core switches, up to 10 redundant distribution switches, and up to 500 access switches (400 cabins and 100 technical rooms). The core switches are in the ship’s MDF, and the distribution switches are in the IDFs. Every cabin and technical room receives a single access switch.

The ship’s cabling infrastructure will not be replaced. Each IDF connects to the MDF through SMF, with two pairs available for the core-to-distribution interconnect. The SM fiber length between the MDF and IDF is under 300 meters (980 ft), and the fiber type is OS1. Each cabin connects to its IDF using one OM2 pair, with a maximum length of 60 meters (200 ft). Each technical room connects to its IDF through one OM2 pair, with lengths from 100 to 150 meters (320 to 500 ft).

For every cabin/technical room, the customer wants to replace its existing fan-less 2530/2540 switches without changing the requirements, except that the uplink to the distribution switch must be upgraded to 10GbE to accommodate increased network traffic, and the technical rooms require redundant power.

The WLAN infrastructure will be refreshed 1:1, with no new cabling or AP locations. It is based on 200/300-series indoor and outdoor APs running InstantOS (fewer than 300 APs), and the customer has no changes to WLAN requirements.

The cruise-line company will replace its current Internet connection before the LAN/WLAN refresh. The new Internet connection will provide 99.8% uptime, which is required to keep paid guest Wi-Fi operational. With this new Internet connection, the CIO wants to base the design on Aruba’s ESP architecture because the Internet connection is guaranteed.

Based on best practices, which switch model should be recommended as the most cost-effective option for the technical rooms?

Options:
A.

HPE Aruba Networking 6300M 24p HPE Smart Rate 1G/2.5G/5G/10G Class6 PoE and 2p 50G and 2p 25G

B.

HPE Aruba Networking 6300M 12p Class8 PoE and 36p Class6 PoE HPE Smart Rate 1G/2.5G/5G and 2p 50G and 2p 10G

C.

HPE Aruba Networking 6200M 36G 12SR5 Class6 PoE 4SFP+

D.

HPE Aruba Networking 6200M 24G Class4 PoE 4SFP+

Questions 20

A large multinational financial institution has engaged you to design a new full-stack wired and wireless network for its new 6-story regional office building. The bottom two floors of the facility will be retail space for a large banking branch. The upper floors will be carpeted corporate office space, with each floor measuring approximately 100,000 sq ft (9290 sq m). All data centers are offsite and are out of scope for this project. The customer is underserved by its existing L2-based network infrastructure and wants to apply modern best practices in the new design. The network must be fully resilient and fault-tolerant, with dynamic segmentation at the edge.

The retail space will provide public guest Wi-Fi access. Retail associates will use corporate tablets for customer service, and the retail floors will contain a mix of wired and wireless devices. Corporate users will primarily connect wirelessly, but several wired clients, printers, and hard VoIP phones will also be used.

The customer also plans to renovate the corporate office space to take advantage of 'smart office' technology. These enhancements will enable blue-dot wayfinding, presence analytics, and other location-based services.

The client has decided to manage two wiring closets as one stack totaling 10 switches, with a minimum transport speed of 25Gbps over OM4 MM fiber. They also want to minimize stacking-cabling cost.

Which switch series would most economically meet these requirements?

Options:
A.

6200F Switch Series

B.

6300F Switch Series

C.

6400 Switch Series

D.

6100 Switch Series