Free Fortinet FCSS_NST_SE-7.4 Practice Exam with Questions & Answers

The Hello packet is being sent from an OSPF router with ID 0.0.0.112.

The two FortiGate devices attempting adjacency are in area 0.0.0.0.

One FortiGate device is configured to require authentication, while the other is not.

The passwords on the FortiGate devices do not match.

The local ForliGate has received one prefix from BGP neighbor 100.64.1.254.

The TCP connection with BGP neighbor 100.64.2.254 was successful.

The local FortiGate has received 18 packets from a BGP neighbor.

The local FortiGate is still calculating the prefixes received from BGP neighbor 100.64.2.264

The total slab size of the sctp_session slab is 0 kB and is associated with the user space.

The total slab size of the ip_session slab is 3600 kB and is associated with the user space.

The total slab size of the ip6_session slab is 1300 kB and is associated with the kernel.

The total slab size of the tcp_session slab is 7500 kB and is associated with the kernel.

The interlace is part of the OSPF backbone area.

There are a total of five OSPF routers attached to the vorz4 network segment

One of the neighbors has a router ID of 0.0.0.4.

In the network connected to port4, two OSPF routers are down.

The first server provided to FortiGate when it performed a DNS query looking for a list of rating servers, was 121.111.236.179.

There is a natural correlation between the value in the FortiGuard-requests field and the value in the Weight field.

FortiGate used 64.26.151.37 as the initial server to validate its contract.

Servers with a negative TZ value are less preferred for rating requests.

The network type connecting the local Fortigate and OSPF neighbor 0.0.0.10 is point-to-point.

All neighbors are in area 0.0.0.0.

The local FortiGate is the BDR.

The local FortiGate is not a DROther.

The local FortiGate has at least one interface that participates in a broadcast network.

The local FortiGate has at least one interface that participates in a point-to-point network.

The local FortiGate is the DR.

Neighbor 0.0.0.18 is the designated router (DR).

With the auxiliary session selling disabled, only auxiliary sessions are offloaded.

With the auxiliary session setting enabled. ECMP traffic is accelerated to the NP6 processor.

With the auxiliary session setting enabled. Iwo sessions are created in case of routing change.

With the auxiliary session setting disabled, for each traffic path. FortiGate uses the same auxiliary session.

Only the interface and gateway information for dev=7 will be removed.

The session information will not change unless the current route has been removed from the routing table.

The session will be flagged as dirty but no route lookups will be performed.

Sessions involving port7 or port19 will not have their routing information flushed.

In the phase 1 proposal configuration, add AES256-SHA256 to the list of encryption algorithms.

In the phase 1 proposal configuration, add AESCBC-SHA2 to the list of encryption algorithms.

In the phase 1 network configuration, set the IKE version to 2.

In the phase 1 proposal configuration, add AES128-SHA128 to the list of encryption algorithms.