Free BCS CTFL4 Practice Exam with Questions & Answers | Set: 4

The three-point test estimation technique is a method of estimating the test effort based on three initial estimates: the most optimistic, the most likely, and the most pessimistic. The technique uses a weighted average of these three estimates to calculate the final estimate, which is also known as the expected value. The formula for the expected value is:

Expected value = (most optimistic + 4 * most likely + most pessimistic) / 6

Using the given values, the expected value is:

Expected value = (6 + 4 * 30 + 54) / 6 Expected value = 30 person hours

However, the expected value is not the only factor to consider when estimating the test effort. The technique also calculates the standard deviation, which is a measure of the variability or uncertainty of the estimates. The formula for the standard deviation is:

Standard deviation = (most pessimistic - most optimistic) / 6

Using the given values, the standard deviation is:

Standard deviation = (54 - 6) / 6 Standard deviation = 8 person hours

The standard deviation can be used to determine a range of possible values for the test effort, based on a certain level of confidence. For example, using a 68% confidence level, the range is:

Expected value ± standard deviation

Using the calculated values, the range is:

30 ± 8 person hours

Therefore, the final estimate is between 22 person hours and 38 person hours, which is option A.

References: ISTQB® Certified Tester Foundation Level Syllabus v4.01, Section 2.3.2, page 24-25; ISTQB® Glossary v4.02, page 33.

The Testing Quadrants model helps Agile teams by categorizing different types of tests and their purposes. This differentiation helps test managers explain the testing strategy to all stakeholders, ensuring everyone understands the scope and objectives of each test type. This model aids in planning, executing, and tracking testing activities across different quadrants, making it easier to align with stakeholders' expectations and project goals.Reference:ISTQB CTFL Syllabus V4.0, Section 5.1.7

Comprehensive and Detailed In-Depth Explanation:Branch testingis a structural testing technique that ensures eachbranch (decision point)in the control flow is executed at least once. The goal is to measurebranch coverage, which is the number of branches exercised divided by the total number of branches.

(A) describes statement testing, not branch testing.

(B) and (D) introduce confusion between decisions and statements, whereas branch testing focuses on control flow branches.

In simple terms,branch testing checks that all possible decision outcomes (true/false) are executed, whereas statement testing only ensures that each line of code is executed.

Test exit criteria are the conditions that must be fulfilled before concluding a particular testing phase. These criteria act as a checkpoint to assess whether we have achieved the testing objectives and are done with testing1. Test exit criteria are typically defined in the test plan document, which is one of the outputs of the test planning phase. The test plan document describes the scope, approach, resources, and schedule of the testing activities. It also identifies the test items, the features to be tested, the testing tasks, the risks, and the test deliverables2. According to the ISTQB® Certified Tester Foundation Level Syllabus v4.0, the test plan document should include the following information related to the test exit criteria3:

The criteria for evaluating test completion, such as the percentage of test cases executed, the percentage of test coverage achieved, the number and severity of defects found and fixed, the quality and reliability of the software product, and the stakeholder satisfaction.

The criteria for evaluating test process improvement, such as the adherence to the test strategy, the efficiency and effectiveness of the testing activities, the lessons learned and best practices identified, and the recommendations for future improvements.

Therefore, the test plan document is the most appropriate test document to find the test exit criteria described. The other options, such as test design specification, project plan, and requirements specification, are not directly related to the test exit criteria. The test design specification describes the test cases and test procedures for a specific test level or test type3. The project plan describes the overall objectives, scope, assumptions, risks, and deliverables of the software project4. The requirementsspecification describes the functional and non-functional requirements of the software product5. None of these documents specify the conditions for ending the testing process or evaluating the testing outcomes. References = ISTQB® Certified Tester Foundation Level Syllabus v4.0, Entry and Exit Criteria in Software Testing | Baeldung onComputer Science, Entry And Exit Criteria In Software Testing - Rishabh Software, Entry and Exit Criteria in Software Testing Life Cycle - STLC [2022 Updated] - Testsigma Blog, ISTQB® releases Certified Tester Foundation Level v4.0 (CTFL).

Static analysis tools are software tools that examine the source code of a program without executing it. They can detect various types of issues, such as syntax errors, coding standardsviolations, security vulnerabilities, and potential bugs12. However, static analysis tools cannot identify issues that depend on the runtime behavior or performance of the program, such as very low MTBF (Mean Time Between failure)3. MTBF is a measure of the reliability of a system or component. It is calculated by dividing the total operating time by the number of failures. MTBF reflects how often a system or component fails during its expected lifetime. Static analysis tools cannot measure MTBF because they do not run the program or observe its failures. MTBF can only be estimated by dynamic testing, which involves executing the program under various conditions and collecting data on its failures4. Therefore, very low MTBF is an issue that cannot be identified by static analysis tools. The other options, such as potentially endless loops, referencing a variable with an undefined value, and security vulnerabilities, are issues that can be identified by static analysis tools. Static analysis tools can detect potentially endless loops by analyzing the control flow and data flow of the program and checking for conditions that may never become false5. Static analysis tools can detect referencing a variable with an undefined value by checking the scope and initialization of variables and reporting any use of uninitialized variables6. Static analysis tools can detect security vulnerabilities by checking for common patterns of insecure code, such as buffer overflows, SQL injections, cross-site scripting, and weak encryption. References = What Is Static Analysis? Static Code Analysis Tools - Perforce Software, How Static Code Analysis Works | Perforce, Static Code Analysis: Techniques, Top 5 Benefits & 3 Challenges, What is MTBF? Mean Time Between Failures Explained | Perforce, Static analysis tools - Software Testing MCQs - CareerRide, ISTQB_Chapter3 | Quizizz, [Static Code Analysis for Security Vulnerabilities | Perforce].

Failures can be caused by defects, but also by environmental conditions. A failure is an event in which the software system does not perform a required function or performs a function incorrectly, according to the expected behavior. A defect is a flaw in the software system or a deviation from the requirements or the specifications, that may cause a failure. However, not all failures are caused by defects, as some failures may be caused by environmental conditions, such as hardware malfunctions, network interruptions, power outages, incompatible configurations, etc. Environmental conditions are factors that affect the operation of the software system, but are not part of the software system itself. The other statements are false, because:

A defect does not always produce a failure, while a bug always produces a failure. This statement is false, because a defect may or may not produce a failure, depending on the inputs, the outputs, the states, or the scenarios of the software system, and a bug is just another term for a defect, so it has the same possibility of producing a failure as a defect. For example, a defect in a rarely used feature or a hidden branch of the code may never produce a failure, while a defect in a frequently used feature or a critical path of the code may produce a failure often. A bug is not a different concept from a defect, but rather a synonym or a colloquial term for a defect, so it has the same definition and implications as a defect.

A defect may cause a failure which, when occurring, always causes an error. This statement is false, because an error is not a consequence of a failure, but rather a cause of a defect. An error is a human action or a mistake that produces a defect in the software system, such as a typo, a logic flaw, a requirement misunderstanding, etc. An error is not observable in the software system, but rather in the human mind or the human work products, such as the code, the design, the documentation, etc. A failure is not a cause of an error, but rather a result of a defect, which is a result of an error. For example, an error in the code may cause a defect in the software system, which may cause a failure in the software behavior.

Bugs are defects found during component testing, while failures are defects found at higher test levels. This statement is false, because bugs and failures are not different types of defects, but rather different terms for defects and their manifestations. As mentioned before, bugs are just another word for defects, and failures are the events in which the software system does not perform as expected due to defects. Bugs and failures can be found at any test level, not only at component testing or higher test levels. Test levels are the stages of testing that correspond to the levels of integration of the software system, such as component testing, integration testing, system testing, and acceptance testing. Defects and failures can occur and be detected at any test level, depending on the test objectives, the test basis, the test techniques, and the test environment. References: ISTQB Certified Tester Foundation Level (CTFL) v4.0 sources and documents:

ISTQB® Certified Tester Foundation Level Syllabus v4.0, Chapter 1.1.2, Testing and Quality1

ISTQB® Certified Tester Foundation Level Syllabus v4.0, Chapter 1.2.1, Testing Principles1

ISTQB® Certified Tester Foundation Level Syllabus v4.0, Chapter 1.3.1, Testing in Software Development Lifecycles1

ISTQB® Glossary of Testing Terms v4.0, Failure, Defect, Bug, Environmental Condition, Error, Test Level2

A new navigation system compared with a previous system is the most suitable application for testing by use cases, because it involves a high level of interaction between the user and the system, and the expected behavior and outcomes of the system are based on the user’s needs and goals. Use cases can help to specify the functional requirements of the new navigation system, such as the ability to enter a destination, select a route, follow the directions, receive alerts, etc. Use cases can also help to compare the accuracy and usability of the new system with the previous system, by defining the success and failure scenarios, the preconditions and postconditions, and the alternative flows of each use case. Use cases can also help to design and execute test cases that cover the main and exceptional paths of each use case, and to verify the satisfaction of the user’s expectations.

The other options are not the most suitable applications for testing by use cases, because they do not involve a high level of interaction between the user and the system, or the expected behavior and outcomes of the system are not based on the user’s needs and goals. A billing system used to calculate monthly charge based on a large number of subscriber parameters is more suitable for testing by data-driven testing, which is a technique for testing the functionality and performance of a system or component by using a large set of input and output data. The ability of an antivirus package to detect and quarantine a new threat is more suitable for testing by exploratory testing, which is a technique for testing the functionality and security of a system or component by using an informal and flexible approach, based on the tester’s experience and intuition. The suitability and performance of a multimedia (audio video based) system to a new operating system is more suitable for testing by compatibility testing, which is a technique for testing the functionality and performance of a system or component by using different hardware, software, or network environments. References = CTFL 4.0 Syllabus, Section 3.1.1, page 28-29; Section 4.1.1, page 44-45; Section 4.2.1, page 47-48.

The question is about identifying an example of testing contributing to higher quality. Quality is the degree to which a component, system or process meets specified requirements and/oruser/customer needs and expectations1. Testing is the process consisting of all lifecycle activities, both static and dynamic, concerned with planning, preparation and evaluation of software products and related work products to determine that they satisfy specified requirements, to demonstrate that they are fit for purpose and to detect defects2.

Therefore, testing contributes to higher quality by verifying and validating that the software products and related work products meet the specified requirements, are fit for purpose and have no defects, or at least have a reduced number of defects. Testing also provides information about the quality of the software products and related work products to the stakeholders, who can make informed decisions based on the test results3.

Out of the four given statements, only option D is an example of testing contributing to higher quality, as it shows that testing has detected a defect (a flaw in a component or system that can cause the component or system to fail to perform its required function4) and that the defect has been resolved (fixed and confirmed) prior to release (delivery of the software product to the customer or end user). This means that testing has prevented a potential failure (an event in which a component or system does not perform a required function within specified limits) from occurring in the operational environment, and thus has improved the quality of the software product.

Option A is not an example of testing contributing to higher quality, as it is a reporting activity that summarizes the test results and evaluates the test objectives, but does not directly affect the quality of the software product or related work products. A test summary report is a document that records and communicates the outcomes of testing activities, including test completion criteria, test results, incident reports, test summary and evaluation, and lessons learned.

Option B is not an example of testing contributing to higher quality, as it is a planning activity that estimates the resources and time needed for testing activities, but does not directly affect the quality of the software product or related work products. A test effort estimate is an approximation of the amount of work and/or the duration of time required to perform testing activities.

Option C is not an example of testing contributing to higher quality, as it is a preparation activity that sets up the test environment (an environment containing hardware, instrumentation, simulators, software tools, and other support elements needed to conduct a test), but does not directly affect the quality of the software product or related work products. A test environment installation is a process of installing and configuring the test environment according to the test environment specification.

References:

1: ISTQB Certified Tester Foundation Level Syllabus 2018, Version 4.0, p. 10

2: ISTQB Certified Tester Foundation Level Syllabus 2018, Version 4.0, p. 11

3: ISTQB Certified Tester Foundation Level Syllabus 2018, Version 4.0, p. 12

4: ISTQB Certified Tester Foundation Level Syllabus 2018, Version 4.0, p. 13

: ISTQB Certified Tester Foundation Level Syllabus 2018, Version 4.0, p. 13

: ISTQB Certified Tester Foundation Level Syllabus 2018, Version 4.0, p. 77

: ISTQB Certified Tester Foundation Level Syllabus 2018, Version 4.0, p. 78

: ISTQB Certified Tester Foundation Level Syllabus 2018, Version 4.0, p. 79

: ISTQB Certified Tester Foundation Level Syllabus 2018, Version 4.0, p. 80

: ISTQB Certified Tester Foundation Level Syllabus 2018, Version 4.0, p. 81

: ISTQB Certified Tester Foundation Level Syllabus 2018, Version 4.0, p. 82

: ISTQB Certified Tester Foundation Level Syllabus 2018, Version 4.0, p. 83

: ISTQB Certified Tester Foundation Level Syllabus 2018, Version 4.0, p. 84

: ISTQB Certified Tester Foundation Level Syllabus 2018, Version 4.0, p. 85

: ISTQB Certified Tester Foundation Level Syllabus 2018, Version 4.0, p. 86

: ISTQB Certified Tester Foundation Level Syllabus 2018, Version 4.0, p. 87

: ISTQB Certified Tester Foundation Level Syllabus 2018, Version 4.0, p. 88

: ISTQB Certified Tester Foundation Level Syllabus 2018, Version 4.0, p. 89

: ISTQB Certified Tester Foundation Level Syllabus 2018, Version 4.0, p. 90

: ISTQB Certified Tester Foundation Level Syllabus 2018, Version 4.0, p. 91

: ISTQB Certified Tester Foundation Level Syllabus 2018, Version 4.0, p. 92

: ISTQB Certified Tester Foundation Level Syllabus 2018, Version 4.0, p. 93

: ISTQB Certified Tester Foundation Level Syllabus 2018, Version 4.0, p. 94

: ISTQB Certified Tester Foundation Level Syllabus 2018, Version 4.0, p. 95

: ISTQB Certified Tester Foundation Level Syllabus 2018, Version 4.0, p. 96

: ISTQB Certified Tester Foundation Level Syllabus 2018, Version 4.0, p. 97

: ISTQB Certified Tester Foundation Level Syllabus 2018, Version 4.0, p. 98

: ISTQB Certified Tester Foundation Level Syllabus 2018, Version 4.0, p. 99

: ISTQB Certified Tester Foundation Level Syllabus 2018, Version 4.0, p. 100

: ISTQB Certified Tester Foundation Level Syllabus 2018, Version 4.0, p. 101

: ISTQB Certified Tester Foundation Level Syllabus 2018, Version 4.0, p. 102

: ISTQB Certified Tester Foundation Level Syllabus 2018, Version 4.0, p. 103

: ISTQB Certified Tester Foundation Level Syllabus 2018, Version 4.0, p. 104

: ISTQB Certified Tester Foundation Level Syllabus 2018, Version 4.0, p. 105

: ISTQB Certified Tester Foundation Level Syllabus 2018, Version 4.0, p. 106

: ISTQB Certified Tester Foundation Level Syllabus 2018, Version 4.0, p. 107

Comprehensive and Detailed In-Depth Explanation:Equivalence partitioning (EP)divides input values into classes where test casesrepresent all possible valuesof each partition. The partitions in this scenario are:

≤7 (too cold → W)

8-21 (standstill → X)

22-29 (ideal → Y)

≥30 (too hot → Z)

OptionC ({7,10,25,29})covers all partitionsby selecting representative values:

7 → Too cold (W)

10 → Standstill (X)

25 → Ideal (Y)

29 → Upper boundary of ideal (Y)

Other options do not cover all partitions adequately.

This answer is correct because the test procedures of all test cases that have been executed are not a typical content of a test completion report for a test project. A test completion report is a document that summarizes the test activities and results at the end of a test project. It usually includes information such as the test objectives, scope, approach, resources, schedule, results, deviations, issues, risks, lessons learned, and recommendations for improvement. The test procedures of all test cases that have been executed are part of the test documentation, but they are not relevant for the test completion report, as they do not provide a high-level overview of the test project outcomes and performance. References: ISTQB Foundation Level Syllabus v4.0, Section 2.5.3.2