Free RedHat RH302 Practice Exam with Questions & Answers | Set: 8

Do the following steps as:

1.vi /etc/vsftpd.ftpusers

user1

user2

2.service vsftpd start| restart

Using /etc/vsftpd.ftpusers file we can deny to certain users to access files via ftp. As well as there is another file named /etc/vsftpd.user_list can be used to allow or to deny to users.

Do the following steps as:

1.vi /etc/squid/squid.conf

#detault:

http_port8080

#Recommended minimum configuration:

# Near the src acl src section

acl allownet src 192.168.0.0/255.255.255.0

acl msnnet dstdomain .msn.com

#Default:

# http_access deny all

#Under Herehttp_access deny msnnet

http_access allow allownet

2.service squid start

3.chkconfig squid on

squid is a proxy caching server, using squid we can share the internet, block the internet, to certain network. First we should define the port for squid, the standard port for squid is 3128. We can run squid on different port by specifying http_port portnumber.

To block or allow the Internet access to hosts, we should create the acl (Access Control List). In this file we can specify only the IP address.

Example: acl aclname src IP/NetmaskAfter creating acl we can block or allow the Internet to specified acl.

http_access allow | deny alcname

Do the following steps as:

1.vi /etc/hosts.deny

sshd:ALL EXCEPT .example.com: spawn echo “Loging attempt from %c to %s” | mail –s “Login from denied hosts” root

We can secure the services using tcp_wrappers. There are main two files, /etc/hosts.allow and /etc/hosts.deny.

There will be three stage access checking

-Is access explicitly permitted? Means permitted from /etc/hosts.allow?

- Otherwise, Is access explicitly denied? Means denied from /etc/hosts.deny?

- Otherwise, by default permit access if neither condition matched.

To deny the services we can configure /etc/hosts.deny file using ALL and EXCEPT operation. Pattern of /etc/hosts.allow and /etc/hosts.deny file is:

Demon_list:client_list:options

In Client list can be either domain name or IP address.

Do the following steps as:

1.vi /etc/named.conf

zone “example.com” IN {

type master;

file “example.com.zone”;

};

/etc/named.conf file is used to register the zone as well as specify the global option for DNS. There are two types of zone, i. Master, which contains the original data. ii. Slave, backup of master. Here master zone is configured and file name is specified “example.com.zone”, which should be created in /var/named/chroot/var/named/

2.vi /var/named/chroot/var/named/example.com.zone

$TTL 345345

@ IN SOA @ webmaster.example.com.(

101;Serial Number

1H;Refresh Time

1M;Retry Time

1W;Expire Time

1D;Minimum Time to Live

)

@ IN NS 192.100.0.X

www 0 IN A 192.100.0.1

www 0 IN A 192.100.0.2

www 0 IN A 192.100.0.3

www 0 IN A 192.100.0.4

www 0 IN A 192.100.0.5

mail IN A 192.100.0.6

mail1 IN A 192.100.0.7

mail2 IN A 192.100.0.8

@ IN MX 5 mail.example.com.

@ IN MX 8 mail1.example.com.

@ IN MX 10 mail2.example.com.

3.service named start

4.rndc reload

5.chkconfig named on

Zone file should create on /var/named/chroot/var/named. Default Directory Path is specified on /var/named.conf.

$TTLTime To Live, How much seconds cache server stores the information about DNS. And Five Parameters specified Serial Number used by slave to synchronize with master server. Refresh and Retry Time used by slave server. NS is the Name (DNS)server where lookup the domain. A (Associated IP) for particular host. DNS has mechanism to load balance the request from clients. You can verify using hostwww.example.com command. MX resource records are used to define mail handler or exchanger for the domain. MX record must pass the positive integer value. This integer value is used by remote Mail Transport Agent (MTA) to determine, which host has delivery priority for the zone. The Lowest integer value will get the priority.

At exam Lab example.com domain resides on 192.168.0.0/24 Network and cracker.org resides on 192.168.1.0/24 Network.

1.vi /etc/squid/squid.conf

#detault:

http_port8080

#Recommended minimum configuration:

# Near the src acl src section

acl allownet src 192.168.0.0/255.255.255.0

acl denynet src 192.168.1.0/255.255.255.0

#Default:

# http_access deny all

#Under Herehttp_access allow allownet

http_access deny denynet

2.service squid start

3.chkconfig squid on

squid is a proxy caching server, using squid we can share the internet, block the internet, to certain network. First we should define the port for squid, the standard port for squid is 3128. We can run squid on different port by specifying http_port portnumber.

Slave DNS is the backup of master DNS. Automatically within a certain time slave DNS synchronizes with the Master DNS server.

1.vi /etc/named.conf

zone “example.com” IN {

type slave;

masters { 192.100.0.254; };

file “example.com.zone”;

};

named-checkconf command checks the syntax for /etc/named.conf file.

service named start | restart

Do the following steps as:

1.vi /etc/httpd/conf/httpd.conf

NameVirtualHost 192.100.0.X

<VirtualHostwww.abc.com >

ServerNamewww.abc.com

DocumentRoot /var/www/abc/

DirectoryIndexindex.html

ServerAdminwebmaster@abc.com

ErrorLog logs/error_abc.logs

CustomLog logs/custom_abc.logs common

</VirtualHost>

<VirtualHostwww.example.com >

ServerNamewww.example.com

DocumentRoot /var/www/example/

DirectoryIndexindex.html

ServerAdminwebmaster@example.com

ErrorLog logs/error_example.logs

CustomLog logs/custom_example.logs common

</VirtualHost>

2.Create the directory and index page on specified path. (Index page can download fromftp://server1.example.comat exam time)

3.service httpd start| restart

4.chkconfig httpd on

5.links http://www.abc.com

6.links http://www.example.com

For Name based Virtual Hosting, we should specified the IP address on which we are going to host the multiple sites using NameVirtualHost options.

ServerName means you FQDN, already lookup on DNS

DirectoryRoot path for web documents for this site.

DirectoryIndex default page for websites.

Do the following steps as:

1.vi /etc/vsftpd/vsftpd.conf

anonymous_enable=no

2.service vsftpd restart

/etc/vsftpd/vsftpd.conf file is used to allow or deny to anonymous or real user. To allow anonymous anonymous_enable=yes should be there. Sample configuration is like.

# Allow anonymous FTP? (Beware - allowed by default if you comment this out).

anonymous_enable=YES

#

# Uncomment this to allow local users to log in.

local_enable=YES

#

# Uncomment this to enable any form of FTP write command.

write_enable=YES

#

# Default umask for local users is 077. You may wish to change this to 022,

# if your users expect that (022 is used by most other ftpd's)

local_umask=022

#

# Uncomment this to allow the anonymous FTP user to upload files. This only

# has an effect if the above global write enable is activated. Also, you will

# obviously need to create a directory writable by the FTP user.

#anon_upload_enable=YES

#

# Uncomment this if you want the anonymous FTP user to be able to create

# new directories.

#anon_mkdir_write_enable=YES

#

# Activate directory messages - messages given to remote users when they

# go into a certain directory.

dirmessage_enable=YES

#

# Activate logging of uploads/downloads.

xferlog_enable=YES

#

# Make sure PORT transfer connections originate from port 20 (ftp-data).

connect_from_port_20=YES

#

# If you want, you can arrange for uploaded anonymous files to be owned by

# a different user. Note! Using "root" for uploaded files is not

# recommended!

#chown_uploads=YES

#chown_username=whoever

#

# You may override where the log file goes if you like. The default is shown

# below.

#xferlog_file=/var/log/vsftpd.log

#

# If you want, you can have your log file in standard ftpd xferlog format

xferlog_std_format=YES

#

# You may change the default value for timing out an idle session.

#idle_session_timeout=600

#

# You may change the default value for timing out a data connection.

#data_connection_timeout=120

#

# It is recommended that you define on your system a unique user which the

# ftp server can use as a totally isolated and unprivileged user.

#nopriv_user=ftpsecure

#

# Enable this and the server will recognise asynchronous ABOR requests. Not

# recommended for security (the code is non-trivial). Not enabling it,

# however, may confuse older FTP clients.

#async_abor_enable=YES

#

# By default the server will pretend to allow ASCII mode but in fact ignore

# the request. Turn on the below options to have the server actually do ASCII

# mangling on files when in ASCII mode.

# Beware that turning on ascii_download_enable enables malicious remote parties

# to consume your I/O resources, by issuing the command "SIZE /big/file" in

# ASCII mode.

# These ASCII options are split into upload and download because you may wish

# to enable ASCII uploads (to prevent uploaded scripts etc. from breaking),

# without the DoS risk of SIZE and ASCII downloads. ASCII mangling should be

# on the client anyway..

#ascii_upload_enable=YES

#ascii_download_enable=YES

#

# You may fully customise the login banner string:

#ftpd_banner=Welcome to blah FTP service.

#

# You may specify a file of disallowed anonymous e-mail addresses. Apparently

# useful for combatting certain DoS attacks.

#deny_email_enable=YES

# (default follows)

#banned_email_file=/etc/vsftpd.banned_emails

#

# You may specify an explicit list of local users to chroot() to their home

# directory. If chroot_local_user is YES, then this list becomes a list of

# users to NOT chroot().

#chroot_list_enable=YES

# (default follows)

#chroot_list_file=/etc/vsftpd.chroot_list

#

# You may activate the "-R" option to the builtin ls. This is disabled by

# default to avoid remote users being able to cause excessive I/O on large

# sites. However, some broken FTP clients such as "ncftp" and "mirror" assume

# the presence of the "-R" option, so there is a strong case for enabling it.

#ls_recurse_enable=YES

pam_service_name=vsftpd

userlist_enable=YES

#enable for standalone mode

listen=YES

tcp_wrappers=YES

Do the following steps as:

1.vi /etc/httpd/conf/httpd.conf

<VirtualHost 192.100.0.1>

ServerNamewww.abc.com

DocumentRoot /var/www/abc/

<Directory /var/www/abc>

AllowOverrideauthconfig

</Directory>

DirectoryIndexindex.html

ServerAdminwebmaster@abc.com

ErrorLog logs/error_abc.logs

CustomLog logs/custom_abc.logs common

</VirtualHost>

2.Create the directory and index page on specified path. (Index page can download fromftp://server1.example.comat exam time)

3.vi /var/www/abc/.htaccess

AuthName“Only to Authorized Users”

AuthTypebasic

AuthUserFile/etc/httpd/conf/mypasswd

requirevalid-user

htpasswd –c /etc/httpd/conf/mypasswd user5

htpasswd –m /etc/httpd/conf/mypasswd user6

chgrp apache /etc/httpd/conf/mypasswd

chmod g+r /etc/httpd/conf/mypasswd

service httpd restart

chkconfig httpd on

AllowOverride Authconfig is used to specify which and how much configuration can be overridden by directory specific .htaccess files.

One of the most common tasks performed in users’ .htaccess files is adding authorization. Typically, a user will setup authorization for directories that hold sensitive information with a configuration.

Do the following steps as:

1.vi /etc/hosts.deny

ALL:.cracker.org EXCEPT trusted.cracker.org

We can secure the services using tcp_wrappers. There are main two files, /etc/hosts.allow and /etc/hosts.deny.

There will be three stage access checking

-Is access explicitly permitted? Means permitted from /etc/hosts.allow?

- Otherwise, Is access explicitly denied? Means denied from /etc/hosts.deny?

- Otherwise, by default permit access if neither condition matched.

To deny the services we can configure /etc/hosts.deny file using ALL and EXCEPT operation. Pattern of /etc/hosts.allow and /etc/hosts.deny file is:

Demon_list:client_list:options

In Client list can be either domain name or IP address.