Free Huawei H12-322 Practice Exam with Questions & Answers | Set: 5

Confirm the overall rules of the route, you need to confirm with the owner whether you can punch through the wall, whether you can take the open line, whether there is conditional hidden line, the network cable is

Do you want to use a wire slot or add a conduit?

In the survey process, the length of the trace should be calculated according to the actual environment, and the length of the trace is not required.

If the AP needs AC power supply, it needs to confirm the location of the power supply. If there are special requirements for the route in some locations, additional marking is required.

In the outdoor scene survey, each outdoor AP installation location needs to consider the routing problem.

True

False

S2700-9TP-PWR-EI

S5700-24TP-PWR-SI

S3700-52P-EI-24S-DCD. S5700-48TP-SI-AC

AP calculator

AP positioning

WLAN signal simulation

Export the bill of materials

In wireless communication engineering, EIRP is commonly used to measure the strength of interference and the ability of the transmitter to transmit strong signals.

The product of the power supplied by the EIRP to the antenna of the radio transmitter and the absolute gain of the antenna in a given direction

EIRP represents the transmit power of the AP

EIRP=P transmit power-Loss feeder loss + G antenna gain

The network cable between the AP and the switch should be no more than 100 meters long. In some cases, it should not exceed 80 meters.

When calculating the length of the network cable, it is just right to switch from the switch to the AP.

Keep away from strong electric and magnetic wires

Communicate with customers in advance to avoid the possibility of construction due to property or aesthetic requirements

PSE

PD

PI

POU

True

False

260Mbps

270Mbps

288Mbps

300Mbps

True

False