Free BICSI RCDD-002 Practice Exam with Questions & Answers | Set: 4

You have determined that the equipment room (ER) you are designing will be the minimum size of 15 sq m (160 sq ft) and is servicing 80 but architectural changes will add 175 , which will require you to add a horizontal cross-connect (HC). What size should the equipment room (ER) be?

The recommended ratio of patch panels to horizontal cable management panels is ________ RU of patch panel to ________ rack unit (RU) of horizontal cable management panel.

You are recommending to an architect the location within a telecommunications room for the placement of floor sleeves connecting to the telecommunications room directly below. Where should the sleeves be placed within the room?

You have been selected to do the telecommunications design on a new, single story building. The architect requires the size and location of the telecommunications rooms so their building design can proceed. From the items listed below (all of which are required for the design), which one is the logical starting point in order to provide the architect with a size and location for the room?

At a minimum, convenience receptacles in an ER or TR are to be located ________ AFF.

The distance a CCTV signal may be run is determined by the strength of the signal at the source, required signal strength at the receiver, and:

What is the MOST important aspect of fire alarm signaling?

For an analog camera, what is the normal frame rate in frames per second?

The concept of the "security quandary" is based on providing a balancing act between what two elements?

Given the following values, calculate the focal length of the camera lens.

- Distance of the camera to the object is 5 m

- Vertical field of view is 2 m

- Horizontal field of view 1 m