Free Nutanix NCP-US-6.5 Practice Exam with Questions & Answers | Set: 2

Nutanix Volumes is a feature that allows users to create and manage block storage devices (volume groups) on a Nutanix cluster. Volume groups can be accessed by external hosts using the iSCSI protocol. To secure volume groups from unauthorized access, Nutanix recommends configuring CHAP (Challenge-Handshake Authentication Protocol) for each volume group in Prism Element. CHAP is a security feature that authenticates iSCSI initiators and targets before allowing access to a volume group. CHAP requires both the initiator and the target to have a shared secret (a password) that is used to generate a challenge and a response during the authentication process. CHAP can prevent unauthorized access to volume groups and protect data from malicious attacks. References: Nutanix Volumes Administration Guide, page 25; Nutanix Volumes Security Guide

Nutanix’s best practices for Volumes security emphasize securing iSCSI connections through authentication. Configuring Volume Groups to use CHAP ensures that only authorized initiators can access the storage, preventing unauthorized access and aligning with security compliance requirements. This is a direct and mandatory step for securing Volumes, making it the best choice among the options.

Exact Extract from Nutanix Documentation:

From the Nutanix Volumes Administration Guide (available on the Nutanix Portal):

“To align with Nutanix best practices for security, configure Volume Groups to use CHAP (Challenge-Handshake Authentication Protocol) for iSCSI authentication. This ensures that only authorized initiators can access the Volume Group, protecting against unauthorized access and enhancing security.”

 Nutanix Objects requires a Data Services IP to be configured on the Prism Infrastructure (PI) cluster, which is used to expose the S3 API endpoint for accessing buckets and objects. Nutanix Objects also requires AHV IP Address Management (IPAM) to be disabled on the VLAN used for Objects, as Objects uses its own DHCP service to assign IP addresses to the Objects VMs1. References: Nutanix Objects Administration Guide1

Nutanix Files instances are deployed using File Server Virtual Machines (FSVMs) that run on the Nutanix cluster’s hypervisor (AHV, ESXi, or Hyper-V). The minimum resource requirements for deploying FSVMs are specified in the Nutanix Files documentation to ensure proper performance. These requirements are typically defined per FSVM, not per host, as FSVMs are virtual machines distributed across the cluster’s hosts.

According to the official Nutanix documentation:

vCPUs: Each FSVM requires a minimum of 4 vCPUs to operate effectively.

Memory: Each FSVM requires a minimum of 12 GiB of memory (RAM).

The question asks for the “minimum resources” required for deploying Files instances, and the options are framed as “per host.” However, in the context of Nutanix Files, resource requirements are specified per FSVM, as FSVMs are the entities consuming these resources. The options likely reflect a misunderstanding in the original question phrasing, but based on the standard Nutanix Files deployment requirements:

4 vCPUs per FSVM (option D) is correct, as this is the minimum vCPU requirement.

12 GiB of memory per FSVM (option C) is correct, as this is the minimum memory requirement.

Options A (8 vCPUs per host) and B (8 GiB of memory per host) do not align with the documented minimum requirements for FSVMs:

8 vCPUs is higher than the minimum requirement of 4 vCPUs per FSVM.

8 GiB of memory is lower than the minimum requirement of 12 GiB per FSVM.

Exact Extract from Nutanix Documentation:

“For a Nutanix Files deployment, each File Server Virtual Machine (FSVM) requires the following minimum resources:

4 vCPUs

12 GiB of RAMThese resources ensure that the FSVM can handle file service operations efficiently.”— Nutanix Files Deployment Guide, Version 4.0, Section: “System Requirements for Nutanix Files”

The Files feature that the administrator should enable to ensure the sessions will auto-reconnect in such events is Durable File Handles. Durable File Handles is a feature that allows SMB clients to reconnect to a file server after a temporary network disruption or a client sleep state without losing the handle to the open file. Durable File Handles can improve the user experience and reduce the risk of data loss or corruption. Durable File Handles can be enabled for each share in the Files Console. References: Nutanix Files Administration Guide, page 76; Nutanix Files Solution Guide, page 10

Smart DR in Nutanix Files, part of Nutanix Unified Storage (NUS), is a disaster recovery (DR) solution that simplifies the setup of replication policies between file servers (e.g., using NearSync, as seen in Question 24). After configuring a Smart DR policy, the administrator expects to see it in the Policies tab in Prism Central, but it is not visible despite confirmed connectivity between FSVMs and Prism Central via port 9440 (used for Prism communication, as noted in Question 21). This indicates a potential mismatch or configuration issue.

Analysis of Options:

Option A (The primary and recovery file servers do not have the same version): Correct. Smart DR requires that the primary and recovery file servers (source and target) run the same version of Nutanix Files to ensure compatibility. If the versions differ (e.g., primary on Files 4.0, recovery on Files 3.8), the Smart DR policy may fail to register properly in Prism Central, resulting in it not appearing in the Policies tab. This is a common issue in mixed-version environments, as Smart DR relies on consistent features and APIs across both file servers.

Option B (Port 7515 should be open for all External/Client IPs of FSVMs on the Source and Target cluster): Incorrect. Port 7515 is not a standard port for Nutanix Files or Smart DR communication. The External/Client network of FSVMs (used for SMB/NFS traffic) communicates with clients, not between FSVMs or with Prism Central for policy management. Smart DR communication between FSVMs and Prism Central uses port 9440 (already confirmed open), and replication traffic between FSVMs typically uses other ports (e.g., 2009, 2020), but not 7515.

Option C (The primary and recovery file servers do not have the same protocols): Incorrect. Nutanix Files shares can support multiple protocols (e.g., SMB, NFS), but Smart DR operates at the file server level, not the protocol level. The replication policy in Smart DR replicates share data regardless of the protocol, and a protocol mismatch would not prevent the policy from appearing in the Policies tab—it might affect client access, but not policy visibility.

Option D (Port 7515 should be open for all Internal/Storage IPs of FSVMs on the Source and Target cluster): Incorrect. Similar to option B, port 7515 is not relevant for Smart DR or Nutanix Files communication. The Internal/Storage network of FSVMs is used for communication with the Nutanix cluster’s storage pool, but Smart DR policy management and replication traffic do not rely on port 7515. The key ports for replication (e.g., 2009, 2020) are typically already open, and the issue here is policy visibility, not replication traffic.

Why Option A?

Smart DR requires compatibility between the primary and recovery file servers, including running the same version of Nutanix Files. A version mismatch can cause the Smart DR policy to fail registration in Prism Central, preventing it from appearing in the Policies tab. Since port 9440 connectivity is already confirmed, the most likely issue is a version mismatch, which is a common cause of such problems in Nutanix Files DR setups.

Exact Extract from Nutanix Documentation:

From the Nutanix Files Administration Guide (available on the Nutanix Portal):

“Smart DR requires that the primary and recovery file servers run the same version of Nutanix Files to ensure compatibility. A version mismatch between the source and target file servers can prevent the Smart DR policy from registering properly in Prism Central, resulting in the policy not appearing in the Policies tab.”

The Marketing department needs to recover files in a Nutanix Files share with a recovery window of 14 days. Nutanix Files, part of Nutanix Unified Storage (NUS), supports file recovery through Self-Service Restore (SSR) for SMB shares, which relies on snapshots to provide previous versions of files.

Analysis of Options:

Option A (Change default settings in the Protection Configuration window): Incorrect. The “Protection Configuration window” is not a specific feature in Nutanix Files. This may be a vague reference to snapshot policies, but the correct terminology is Protection Domain or snapshot schedules, as in option B.

Option B (Change the Protection Domain settings to keep at least 14 days of snapshots): Correct. Nutanix Files uses snapshots to enable file recovery via SSR. These snapshots are managed through Protection Domains (or snapshot schedules in newer terminology) in Prism Element or Prism Central. To ensure files can be restored within a 14-day timeframe, the snapshot retention policy must be configured to retain snapshots for at least 14 days.

Option C (Install Nutanix Guest Tools on clients who need to perform Self-Service Restore): Incorrect. Nutanix Guest Tools (NGT) is used for VM management features (e.g., VSS snapshots for backups, VM mobility), but it is not required for Self-Service Restore in Nutanix Files. SSR is a client-side feature for SMB shares that works natively with Windows clients (via the Previous Versions tab) and does not require NGT.

Option D (Enable Self-Service Restore at the share level): Correct. Self-Service Restore (SSR) must be enabled at the share level in Nutanix Files to allow users to recover files without administrator intervention. This feature enables the Marketing department to restore files directly from their Windows clients using the Previous Versions feature, provided snapshots are available (as configured in option B).

Selected Configurations:

B: Configuring the snapshot retention to at least 14 days ensures that previous versions of files are available for recovery within the required timeframe.

D: Enabling SSR at the share level allows the Marketing department to perform the recovery themselves, meeting the requirement for user-driven file recovery.

Exact Extract from Nutanix Documentation:

From the Nutanix Files Administration Guide (available on the Nutanix Portal):

“Self-Service Restore (SSR) allows users to recover previous versions of files in SMB shares. To enable SSR, it must be activated at the share level in the Files Console. SSR relies on snapshots to provide previous versions; ensure that snapshot schedules (via Protection Domains or snapshot policies) are configured to retain snapshots for the desired recovery period, such as 14 days.”

The administrator can meet this requirement by configuring data protection policies in the Files view in Prism Central. Data protection policies are policies that define how file data is protected by taking snapshots, replicating them to another site, or tiering them to cloud storage. Data protection policies can be configured for each share or export in a file server in the Files view in Prism Central. The administrator can create different data protection policies for different shares or exports based on their protection needs and requirements. References: Nutanix Files Administration Guide, page 79; Nutanix Files Solution Guide, page 9

The user that is authorized to deploy File Analytics is Prism Central administrator. Prism Central is a web-based user interface that allows administrators to manage multiple Nutanix clusters and services, including Files and File Analytics. Prism Central administrator is a user role that has full access and control over all Prism Central features and functions. To deploy File Analytics, the user must log in to Prism Central as a Prism Central administrator and follow the steps in the File Analytics Deployment wizard. References: Nutanix Files Administration Guide, page 93; Nutanix File Analytics Deployment Guide

The most efficient way to generate a report listing the files matching those in the exhibit is to use Report Builder in File Analytics. Report Builder is a feature that allows administrators to create custom reports based on various filters and criteria, such as file name, file type, file size, file owner, file age, file access time, file modification time, file permission change time, and so on. Report Builder can also export the reports in CSV format for further analysis or sharing. References: Nutanix Files Administration Guide, page 97; Nutanix File Analytics User Guide

The Nutanix-enabled technology that meets these requirements is Objects – WORM with versioning. WORM (Write-Once Read-Many) is a feature that prevents anyone from modifying or deleting data in a bucket while the policy is active. WORM policies help comply with strict data retention regulations that mandate how long specific data must be stored. Versioning is a feature that keeps multiple versions of an object in a bucket whenever it is overwritten or deleted. Versioning policies help preserve previous versions of an object for backup or recovery purposes. By enabling WORM and versioning for an Objects bucket, the administrator can ensure that data is kept for two years without being deleted or overwritten. References: Nutanix Objects User Guide, page 17; Nutanix Objects Solution Guide, page 9