Free Nutanix NCP-MCI-7.5 Practice Exam with Questions & Answers | Set: 3

Nutanix documentation for log collection in Prism Central and related Logbay guidance supports collecting logs for a specific time range, which is exactly what this question requires to minimize noise and capture only the relevant 30-minute incident window. Nutanix also documents that when sending logs to Nutanix Support FTP, the administrator can enter a support case number, allowing the bundle to be attached to the case without manual repackaging. That makes D the strongest answer: use the alert details to identify the impacted entities and timestamps, collect the logs for that time window, and upload them using the support-case workflow. ( Nutanix Portal )

The other options do not produce the right diagnostic artifact. Auto-resolve only affects alert state, not log quality. Tightening thresholds may generate more alerts, but it does not replace collecting platform logs. Exporting a CSV of alerts can help summarize incidents, but it is not the primary evidence Nutanix Support needs for performance troubleshooting. Nutanix’s supported model is very clear: identify the incident timing, collect the appropriate logs for that window, and upload the bundle in a support-compatible way. Therefore D is the authentic answer from a Nutanix troubleshooting workflow perspective. ( Nutanix Portal )

Nutanix security hardening guidance explains that SSH Whitelisted Addresses control which client IPs are allowed to reach the CVM over SSH. If IP restriction is enabled and the new jump box is not on the allowlist, the SSH connection is expected to be refused. In that locked-down state, the correct recovery path is to access the CVM through a local or serial console and update the whitelist to include the new jump box IP. That makes C the correct answer. ( portal.nutanix.com , portal.nutanix.com )

Cluster Lockdown disabling password-based SSH is not the same setting as the SSH allowlist. Prism Central security views can help with visibility, but the key documented mechanism is the whitelist itself. Restarting the CVM does not reset the hardened configuration. Nutanix’s intent is that trusted-source access must be explicitly permitted, and once it is blocked, you need console-level access to make the change safely.

Nutanix documents guest customization profiles as reusable operating-system customization definitions that can be applied during VM deployment. This is precisely what makes them the most efficient answer when a Windows VM will be cloned repeatedly and each clone requires OS-level customization such as naming, identity settings, or first-boot configuration. Instead of creating a separate template each time or manually editing each deployed clone, the administrator creates one reusable customization profile and applies it across deployments. That makes C the correct answer.

This is especially important at scale. Manual post-clone configuration is error-prone and time-consuming, while per-deployment templates create management sprawl. Nutanix’s design encourages reusable policy- or profile-based standardization so that repeated deployments remain consistent and secure. For Windows, that typically means Sysprep-oriented OS customization combined with reusable deployment logic. In other words, the question is asking for the most efficient method, and Nutanix’s documented answer to repeatable OS customization is the guest customization profile. Therefore C is the authentic choice.

For storage-dense nodes, Nutanix allocates CVM resources to ensure the Controller VM can handle storage services efficiently. Official Nutanix documentation shows the Controller VM requires a minimum of 12 vCPUs, and Foundation documentation describes CVM vCPU allocation ranges that increase based on platform characteristics and workload needs. In a dense-storage design with 100 TB per node, the exam-aligned answer is 12 logical cores for the CVM. ( Nutanix Portal )

The key concept here is not simply memorizing one number, but understanding why dense storage affects CVM sizing. The CVM runs critical storage-path services, metadata handling, and data services operations. As node capacity increases, Nutanix expects sufficient CPU to sustain those functions under load. Options 6 and 8 are too small for the documented baseline direction shown in official guidance, while 14 is not the standard answer expected for this scenario. For exam purposes, when the question frames a dense storage node with 100 TB, the supported sizing answer is 12. ( Nutanix Portal )

This question is about CPU feature compatibility, not storage or networking uniformity. Nutanix documentation and KB guidance explain that VM migration can fail when clusters contain nodes with different CPU generations or different exposed CPU features. A VM that is already running with features negotiated on a newer-generation CPU may not live-migrate successfully to an older or feature-different node until it is power-cycled or configured with advanced processor compatibility. That makes C the correct answer. ( portal.nutanix.com , portal.nutanix.com , portal.nutanix.com )

The important subtlety is that “same core count, memory, storage, subnet, and software version” does not guarantee CPU-feature equivalency. Firmware or ADS activity is not the primary issue described. Affinity rules can restrict placement, but the classic symptom after mixing repurposed nodes is CPU compatibility. Nutanix also documents that advanced processor compatibility settings persist across migrations and power cycles, reinforcing that CPU exposure is the real gating factor here.

For AHV, when enabling LACP, Nutanix documentation specifies the Active-Active bond type, also described as balance-tcp. Nutanix explicitly ties LACP and link aggregation behavior to the Active-Active configuration and notes that this configuration sets LACP fallback to Active-Backup on AHV hosts. That makes C the correct bond type for an LACP-enabled design. ( Nutanix Portal )

It is also important to understand why Active-Active with MAC Pinning is wrong here. Nutanix documentation states that the MAC-pinning / balance-slb style must not be used with link aggregation protocols such as LACP. So even though both options sound like they distribute traffic, only one is compatible with LACP. Active-Backup provides redundancy, but not the LACP behavior being requested. “No Uplink Bond” obviously does not meet the requirement. Even without the missing exhibit from the uploaded file, the Nutanix networking documentation makes the intended answer clear: Active-Active is the bond type used when enabling LACP on AHV. ( Nutanix Portal )

Nutanix guidance for compression settings and current container behavior aligns with inline compression as the standard default, with an immediate (0-minute) delay model. Nutanix compression FAQ guidance also states that when deploying compression on a container, the recommended default delay for inline compression is 0, reinforcing the expected default posture for new storage containers. That makes A the correct answer. ( Nutanix )

This is one of those questions where older platform knowledge can cause confusion because historical versions and terminology evolved. The safest exam-oriented approach is to follow the current documented behavior and Nutanix’s own recommended default delay. Post-process compression with 60 minutes used to be a common mental model in older storage discussions, but the modern expected answer for a newly created container in Prism Central is inline compression with a 0-minute delay. Therefore A is the right choice. ( Nutanix )

The wording “security drift” points to SCMA rather than AIDE. In Nutanix security hardening guidance, SCMA scheduling is the control that determines how often SCMA runs, with schedule options such as hourly, daily, weekly, and monthly. That makes the SCMA schedule the setting that changes the cadence of security drift checking without changing the underlying controls themselves. ( Nutanix Portal )

AIDE is a file-integrity mechanism and has its own role, but the question is specifically asking about how often the platform checks for drift in a broader security-configuration sense. Changing the list of entities inspected or baseline enforcement behavior would alter scope or enforcement semantics, not merely frequency. The most direct administrative answer is to change the schedule for SCMA. From an exam perspective, Nutanix often separates what runs, how it is enforced, and when it runs into different settings. Here the requirement is only about “how often,” so option B is the precise match. ( Nutanix Portal )

Nutanix documentation describes guest customization profiles as reusable configuration settings that can be applied during VM deployment from a template and also during certain clone operations. For Linux-based cloud-init workflows, Nutanix explicitly shows that when deploying a VM from a template with Cloud-Init guest customization, administrators can apply or override the customization settings at deployment time. That makes option A the cleanest and most documentation-aligned answer. ( portal.nutanix.com , portal.nutanix.com )

Why not the others? Nutanix does support guided setup and clone scenarios, but the wording “create a VM template for reusability” points most strongly to the template deployment workflow rather than one-off cloning. Cloud-init is also the Nutanix-native customization method for Linux initialization at first boot, which makes it especially suitable for standardized reusable templates. So if the goal is simple repeatable management with a template-driven lifecycle, the correct point to apply the guest customization profile is when deploying a VM with Cloud-Init guest customization, which is A. ( portal.nutanix.com )

Nutanix documentation for Protection Policies supports protecting entities by category, which is the most scalable and administratively efficient method when many current and future VMs share the same RPO requirement. By assigning the marketing VMs to a category and then associating that category with the policy, the administrator avoids one-by-one maintenance and also ensures new VMs can inherit protection simply by category assignment. ( Nutanix Portal )

This is exactly the kind of pattern Nutanix encourages across Prism Central: use categories for dynamic grouping and policy application. Adding each VM individually works, but it is not the easiest or most maintainable approach for a large VM set. Templates are not the unit used here for attaching data protection to running workloads. A category-based protection model gives consistency, scale, and easier future operations, particularly when teams like Marketing may continuously create or receive new VMs. Since the question asks for the easiest way, the category-based workflow in option A is the cleanest answer and aligns directly with official Nutanix policy design. ( Nutanix Portal )