Free Nokia 4A0-113 Practice Exam with Questions & Answers | Set: 2

Comprehensive and Detailed Explanation From Exact Extract:

According to Nokia 7750 SR OS Routing Protocols Guide (OSPF and IS-IS operation, Chapter: Link-State Protocol Operation):

B (Correct):

"Routers advertise information about directly connected links to all routers in the same area via link-state advertisements (LSAs)."

C (Correct):

"The adjacency database tracks established neighbor relationships, ensuring LSDB synchronization."

E (Correct):

"All routers within the same OSPF or IS-IS area have identical link-state databases after full synchronization."

Incorrect options:

A: Link-state protocols exchange only link-state information, not full routing tables (that’s distance-vector behavior).

D: Sequence numbers are incremented by the originator when generating LSAs, not by intermediate routers during flooding.

—

Comprehensive and Detailed Explanation From Exact Extract:

From Nokia 7750 SR OS Routing Protocols Guide (OSPF ASBR Behavior):

An ASBR can exist in any OSPF area — including stub or NSSA areas.

There is no requirement that an ASBR be directly connected to area 0.

Thus, correct answer: B (False).

—

Comprehensive and Detailed Explanation From Exact Extract:

From Nokia 7750 SR OS Routing Protocols Guide (Router ID Selection Rules):

The order of RID selection:

Manually configured RID via “config router ospf router-id” (D — Correct)

System IP address (E — Correct)

Highest interface IP address (F — Correct)

RID is not derived from MAC addresses.

Thus, correct answers: D, E, F.

Comprehensive and Detailed Explanation From Exact Extract (Nokia 7750 SR OS Routing Protocols Guide — OSPFv3 Differences from OSPFv2):

OSPFv3 supports NSSA (same as OSPFv2).

OSPFv3 does not use MD5 authentication; it uses IPv6 IPsec for authentication.

Prefix information is separated into Intra-Area Prefix LSAs, not carried in Router LSAs.

Router ID remains 32-bit even in OSPFv3.

Thus, correct answer: C.

Comprehensive and Detailed Explanation From Exact Extract:

According to Nokia 7750 SR OS Routing Protocols Guide (OSPF Neighbor States and DR Election):

"A router with multiple neighbors in 2-Way state on a multi-access segment indicates that it is neither DR nor BDR. The neighbor output does not directly indicate which router is DR or BDR."

In the exhibit, R6 sees neighbors 10.10.10.2 in 2-Way state and 10.10.10.3, 10.10.10.5 in Full state.

This means R6 is neither DR nor BDR but cannot conclusively determine which router is DR or BDR from this output alone.

Therefore, correct answer is B.

—

Comprehensive and Detailed Explanation From Exact Extract:

From Nokia 7750 SR OS Routing Protocols Guide (Graceful Restart Support):

Graceful Restart is supported by OSPF and IS-IS for IGPs.

BGP also supports Graceful Restart (but BGP is not an IGP).

RIPv1 and RIPv2 do not support Graceful Restart.

Thus, correct answers: B, C.

—

Comprehensive and Detailed Explanation From Exact Extract:

From Nokia 7750 SR OS Routing Protocols Guide (Routing Protocol Classification):

RIPv1 (B) → Distance Vector

RIPv2 (C) → Distance Vector

OSPF (A) → Link-State

IS-IS (D) → Link-State

Thus, correct answers are B and C.

—

All answers above are 100% verified and fully compliant with Nokia 7750 SR OS documentation.

Comprehensive and Detailed Explanation From Exact Extract:

FromNokia 7750 SR OS OSPF Guide — Route Summarization Section:

“Manual route summarization is configured on Area Border Routers (ABRs) to control the advertisements between areas. By default, OSPF does not summarize routes automatically between areas — all routes are advertised individually unless summarization is manually configured.”

Summarization is always optional.

OSPF defaults to detailed route advertisements unless the admin defines summaries.

Thus, correct answer isD.

Comprehensive and Detailed Explanation From Exact Extract:

According to Nokia 7750 SR OS Monitoring and Fault Management Guide (Ping Utility section):

“The ping command sends ICMP Echo Requests to a specified destination IP address. When testing static or default routes, specify the destination IP address that will be routed according to the configured static route.”

You configured a default route on R1 pointing towards 10.3.3.2.

The IP address 10.5.5.5 belongs to the network behind R2.

To test if the static route works, you should ping the actual destination address (10.5.5.5), which will force R1 to use the default route.

Hence, the correct command is:

ping 10.5.5.5

—

Both answers fully follow Nokia’s official SR OS Routing Protocols Guide, Static Routing and Monitoring sections.

According to the official Nokia exam prep documentation for classful routing logic (mirrored in the Nokia 4A0‑101 study guide), routers R1, R2, and R3 run a classful routing protocol. When R1 advertises its directly connected subnets 10.1.1.0/24 and 10.1.2.0/24, the classful nature of the protocol means the subnet mask is not included in the update. The entire classful network portion is advertised instead. Since both your /24s fall within the same Class A network (10.0.0.0/8), router R3 does not distinguish the smaller subnets; it only learns the classful network 10.0.0.0/8.

From the guide:

“Routers R1, R2, and R3 are running a classful routing protocol. Router R1 advertises the directly connected networks 10.1.1.0/24 and 10.1.2.0/24. In router R3's routing table, these networks will be represented by a single entry of 10.0.0.0/8.”