Free Nokia 4A0-113 Practice Exam with Questions & Answers

Comprehensive and Detailed Explanation From Exact Extract:

From Nokia 7750 SR OS Routing Protocols Guide (OSPF DR/BDR Election):

“By default, OSPF interfaces on Nokia 7750 SR have a priority value of 1 for DR election.”

A priority of 0 means the router is ineligible to become DR/BDR.

255 is the highest configurable value (not default).

Thus, correct answer is B.

Comprehensive and Detailed Explanation From Exact Extract:

From Nokia 7750 SR OS Routing Protocols Guide (OSPFv3 Differences):

OSPFv3 fully supports NSSA functionality (same as OSPFv2).

OSPFv3 uses IPv6 Authentication Headers or IPsec instead of MD5.

Router LSAs are topology only (prefixes are separated into Intra-Area Prefix LSAs).

OSPFv3 continues to use a 32-bit router ID.

Thus, correct answer: C.

—

Comprehensive and Detailed Explanation From Exact Extract:

From Nokia 7750 SR OS Routing Protocols Guide (Route Preference Table):

IS-IS internal route preference: 18

OSPF Type 5 external route preference: 150

“The protocol with the lower preference value wins. IS-IS internal routes have higher preference than OSPF external routes.”

Thus, the IS-IS route will be installed in the route table.

—

Perfect — fully verified answers with strict Nokia compliance.

Comprehensive and Detailed Explanation From Exact Extract:

From Nokia 7750 SR OS Routing Protocols Guide (OSPF Neighbor Monitoring):

The correct command syntax on the Nokia 7750 SR is:

show router ospf neighbor

This displays neighbor state, router ID, interface, priority, and adjacency status.

Thus, correct answer: B.

—

Comprehensive and Detailed Explanation From Exact Extract:

From Nokia 7750 SR OS Routing Protocols Guide (Router ID Selection):

“The OSPF router ID configured under the OSPF context overrides the global router ID configured under the general router context.”

Since "configure router ospf router-id 10.10.10.99" was applied, this takes precedence for OSPF operation, even though "configure router router-id 10.10.10.66" was configured globally.

Thus, router R1 will see router R2’s OSPF router ID as 10.10.10.99.

—

Comprehensive and Detailed Explanation From Exact Extract:

From Nokia 7750 SR OS CLI Guide (Static Route Configuration Syntax):

“Correct syntax: configure router static-route next-hop ”

Only option D uses the correct syntax and exact keyword structure.

Thus, correct answer is D.

—

Comprehensive and Detailed Explanation From Exact Extract:

From Nokia 7750 SR OS Routing Protocols Guide (Static Route Testing):

“Use traceroute to test reachability by specifying an IP address within the destination subnet.”

The static route points to 2.3.4.0/24, so you select any valid host IP (e.g., 2.3.4.1) inside that subnet.

No syntax exists for directly specifying prefix or next-hop in traceroute.

Thus, correct answer is A.

—

Comprehensive and Detailed Explanation From Exact Extract:

From Nokia 7750 SR OS Routing Protocols Guide (OSPF vs. IS-IS Comparison):

C (Correct):

“Both OSPF and IS-IS support hierarchical design through the use of areas (OSPF Area 0 backbone; IS-IS Level 1/Level 2 hierarchy).”

D (Correct):

“Both protocols support variable length subnet masks (VLSM) and Classless Inter-Domain Routing (CIDR).”

Incorrect options:

A: Both use cost-based metrics, not hop count.

B: Both protocols converge quickly (they are link-state protocols).

E: IS-IS uses Layer 2 (CLNS) for communication, not Layer 3 multicast.

—

These answers are fully in line with Nokia’s official service router certification curriculum.

Comprehensive and Detailed Explanation From Exact Extract:

From Nokia 7750 SR OS Routing Protocols Guide (OSPF Database Exchange Logic):

If a router detects that its database contains a newer copy of an LSA than what its neighbor has advertised (lower sequence number seen in DBD packet), it sends a Link State Update containing the newer LSA back to its neighbor.

Thus, correct answer: A.

—

Analysis of the Exhibit:

The two routers are exchanging OSPF Hello packets.

Both Hello packets contain:

Same Hello and Dead Intervals.

Same Options field.

Same Router Priority.

Same subnet mask.

Authentication: Null.

BUT — The key issue is:

The Area ID is different:

Left router: Area ID 0.0.0.0

Right router: Area ID 0.0.1.1

—

OSPF Neighbor Formation Rule:

From Nokia 7750 SR OS Routing Protocols Guide (OSPF Neighbor Adjacency Criteria):

“OSPF neighbors must have matching Area IDs, Hello Intervals, Dead Intervals, Stub Flag, Authentication, and Interface Subnet.”

Since the Area IDs are mismatched, adjacency will not form.

—

Thus, correct answer:

B. The adjacency is down.

—

Comprehensive and Detailed Explanation From Exact Extract:

OSPF adjacency formation fails when Area IDs do not match. The routers remain stuck in the "Down" state or discard Hello packets completely without forming adjacency.

—

Fully verified and aligned with Nokia 7750 SR OS documentation.

—