Free Netapp NS0-521 Practice Exam with Questions & Answers | Set: 2

During an iSCSI deployment, if a customer requests a change from twinax cables to fiber-optic cables, two NetApp tools can be used to verify the supported port speeds and transceivers:

Hardware Universe (HWU): This tool is essential for determining the supported transceivers and port speeds for NetApp hardware. It provides detailed information on hardware compatibility, including supported transceivers, cables, and port speeds, which helps ensure that the selected components are compatible with the NetApp storage system.

Interoperability Matrix Tool (IMT): The IMT provides comprehensive compatibility information between NetApp products and third-party components. It includes details on supported transceivers and port speeds, ensuring that any changes made to the network connections are supported and will function correctly in the given configuration.

For more detailed information, you can refer to the following resources:

NetApp Hardware Universe​ (NetApp)​.

NetApp Interoperability Matrix Tool​ (NetApp)​.

In NetApp ONTAP 9.13.1, one of the automatic features that can be used with iSCSI isLIF failover. This feature ensures that in the event of a network failure or a node issue, the Logical Interface (LIF) will automatically fail over to another available port, maintaining connectivity and minimizing disruption to iSCSI traffic.

For more information, refer to:

NetApp ONTAP 9.13.1 Features

To ensure the best performance in an iSCSI SAN implementation:

Connect host and storage ports to the same switches: This minimizes latency and maximizes the efficiency of data paths by ensuring direct connections within the same network segment.

Configure Jumbo frames in the entire data path: Setting a larger Maximum Transmission Unit (MTU) size reduces the overhead for processing each packet, thus improving overall network performance. Ensuring Jumbo frames are configured end-to-end in the data path is crucial for optimal performance.

For further details, check:

NetApp Best Practices for iSCSI

NetApp Community Discussion on iSCSI Performance

When a LUN shows 90% used space in the NetApp ONTAP CLI but a Windows Server shows only 10% used space, the discrepancy is often due to how space allocation is handled between the two systems. Enabling space allocation ensures that the ONTAP system accurately reflects the actual space usage as reported by the host system, in this case, the Windows Server. This adjustment allows ONTAP to reclaim and manage space more effectively, aligning the reported usage between the ONTAP system and the host.

For more information, refer to:

NetApp Community Discussion on Space Allocation

NetApp Documentation on Space Usage

NetApp ONTAP 9.14.1 supports up to a 16-node cluster for SAN and NAS configurations. Given a current 10-node cluster, you can add up to 6 additional nodes to reach the maximum supported node count. This expansion capability ensures scalability for growing storage needs while maintaining high availability and performance.

For more information, refer to:

NetApp Storage Limits Documentation​ (NetApp)

To restrict access to a newly created LUN to specific hosts, the administrator should configure theigroup(initiator group). An igroup is used to control which initiators (hosts) are allowed to access specific LUNs. This ensures that only authorized hosts can access the storage, enhancing security and access control.

For more details, refer to:

NetApp Documentation on iGroups​ (NetApp)​.

To verify the cabling of a four-node NetApp ONTAP SAN cluster after installation, the recommended tool isActive IQ Config Advisor. This tool provides detailed checks for proper configuration, including cabling verification, and helps ensure that best practices are followed for optimal performance and reliability.

For further details, see:

NetApp Active IQ Config Advisor

To configure Foreign LUN Import (FLI) on a NetApp HA pair to migrate over FCP LUNs from a third-party array while serving other LUNs, the following actions are required:

Create zoning from the third-party array to the cluster: Proper zoning ensures that the NetApp cluster can communicate with the third-party storage array.

Convert a single FC port on each controller to an FC initiator port: This is necessary for the NetApp system to initiate the connection and access the LUNs on the third-party array.

For more information, refer to:

NetApp Documentation on Foreign LUN Import

When configuring NVMe/FC (NVMe over Fibre Channel), it is necessary to enable N_Port ID Virtualization (NPIV) on all fabric switches. NPIV allows multiple Fibre Channel initiators to share a single physical Fibre Channel port, which is crucial for NVMe/FC environments where efficient utilization of available ports is needed.

NPIV support enables the creation of virtual ports, which can significantly optimize the configuration and management of Fibre Channel fabrics, thus supporting NVMe/FC operations.

For further details, you can refer to:

NetApp Community - NVMe/FC Configuration​ (NetApp Community)​.

NetApp Documentation - NVMe Overview​ (NetApp)​.