Free Microsoft AZ-802 Practice Exam with Questions & Answers | Set: 4

1. Add a disk resource to the cluster. 2. Create a Cluster Shared Volume (CSV). 3. Put the disk in maintenance mode. 4. Enable BitLocker on the volume. 5. Update the BitLockerProtectorInfo property of the volume.

BitLocker can only be enabled on a Cluster Shared Volume disk while that disk is taken offline to cluster I/O, so the CSV must exist and be placed into maintenance mode before encryption can be applied. The supported sequence begins by adding the disk resource to the cluster and converting it into a Cluster Shared Volume, since BitLocker-on-CSV support requires the disk to already be a CSV rather than a plain cluster disk. The disk is then put into maintenance mode, which takes it offline to the other cluster nodes so it can be safely encrypted without a node attempting to access it mid-operation. With the CSV disk offline in maintenance mode, BitLocker is enabled on the volume. Finally, the volume ' s BitLockerProtectorInfo property is updated so that Failover Clustering registers the unlock protector, allowing the volume to automatically unlock on every cluster node once maintenance mode ends and the CSV is brought back online. Performing these steps out of order either fails outright -- BitLocker cannot be enabled on a CSV disk that is still online and actively used by the cluster -- or leaves the other cluster nodes unable to bring the encrypted volume back online afterward, since they would lack the registered unlock protector. Therefore, the correct order is: add the disk resource, create the CSV, put the disk in maintenance mode, enable BitLocker, and update BitLockerProtectorInfo.

On Cluster1: Import the Azure Migrate appliance. In Azure: Create an Azure Migrate project.

APP3 and APP4 run as virtual machines on the on-premises Cluster1 Hyper-V failover cluster, so migrating them to Azure uses the Azure Migrate: Server Migration workflow for Hyper-V. That workflow requires an Azure Migrate project to first be created in Azure, since the project is the container that organizes the migration effort, tracks discovered and assessed machines, and holds the configuration for the subsequent discovery and replication work. On the Cluster1 side, the Azure Migrate appliance -- a purpose-built VM or OVA image supplied by Azure Migrate specifically for Hyper-V environments -- must be imported (deployed) onto the Hyper-V host or cluster, where it discovers the VMs running there and orchestrates their replication into Azure. Configuring an Azure Network Adapter, creating a Point-to-Site VPN connection to Vnet1, installing the Azure File Sync agent, and installing the Windows Server Migration Tools are all unrelated actions that do not perform Hyper-V VM discovery or replication for an Azure Migrate project. Similarly, creating a premium block blob storage account, a private endpoint, or a VPN gateway in Azure are not the resource that Azure Migrate itself requires to begin a migration project -- an Azure Migrate project is. Therefore, importing the Azure Migrate appliance onto Cluster1 and creating an Azure Migrate project in Azure are the two required preparatory actions.

Enforce the security policy: Microsoft Defender Application Control. Manage the policy settings: Group Policy Objects (GPOs).

Windows Defender Application Control (WDAC) is the platform feature that enforces which applications are authorized to install or run on a Windows Server, directly meeting the stated requirement that only authorized applications can be installed or run on the servers in the forest. Microsoft Defender Application Guard isolates untrusted browsing sessions in a container and Microsoft Defender Credential Guard protects credential material from theft -- neither controls which applications are permitted to execute. Microsoft Defender for Endpoint is an endpoint detection-and-response platform that detects and responds to threats rather than enforcing a whitelist of permitted applications. Because the servers described are on-premises, domain-joined machines rather than Intune-managed, Microsoft Entra-joined devices, the WDAC policy settings here must be managed through Group Policy Objects distributed via AD DS, not through Intune. Configuration profiles in Microsoft Intune and compliance policies in Microsoft Intune are both cloud-management mechanisms that apply only to devices enrolled in and managed by Intune, which these on-premises, domain-joined servers are not. Therefore, WDAC is the enforcing service and Group Policy Objects are the correct management mechanism for these on-premises servers.

Microsoft Defender for Identity is the Microsoft Sentinel data connector purpose-built to monitor on-premises Active Directory domain controllers and surface exactly the insecure-protocol activity described in the requirement, including authentication attempts and sign-ins that rely on legacy or unsigned protocols such as NTLMv1, SMBv1, and unsigned LDAP binds. It does this by analyzing domain controller network traffic and Windows Events directly on the DCs, which is exactly where this insecure-protocol usage originates. The Threat Intelligence - TAXII connector ingests external threat-intelligence indicator feeds (IP addresses, file hashes, domains) from TAXII-compliant sources and has nothing to do with monitoring authentication protocol usage on domain controllers. The Azure Active Directory (Microsoft Entra ID) connector reports on cloud sign-in and audit log events for the Entra tenant, not on legacy protocol usage against on-premises AD DS domain controllers. Microsoft Defender for Cloud focuses on cloud resource security posture management and workload protection rather than detecting legacy authentication protocol usage against on-premises domain controllers. Therefore, connecting Microsoft Defender for Identity to Microsoft Sentinel is the correct connector to identify connections to the domain controllers that use insecure protocols.

To enable WebApp1 to handle requests for the website: Add a custom domain name. To point client connections to WebApp1: Modify a DNS record.

For an Azure App Service web app to accept and correctly serve requests addressed to https://www.fabrikam.com rather than only its default *.azurewebsites.net hostname, the custom domain www.fabrikam.com must be added and bound to WebApp1 -- this is the specific configuration step that makes the app recognize and handle that custom hostname at all. Creating a deployment slot supports staged rollout and swap scenarios and does nothing to bind a custom domain, and creating a private endpoint provides private, VNet-restricted connectivity rather than public custom-domain handling, so neither accomplishes the stated goal. Once WEB1 and WEB2 are decommissioned per the migration plan, client traffic that currently resolves to those on-premises-facing web servers must instead be directed to WebApp1; since DNS is what resolves the www.fabrikam.com name to a specific endpoint, the DNS record for that hostname must be modified (typically to a CNAME record pointing at WebApp1 ' s default hostname, together with the domain-verification TXT record Azure requires before it will accept the custom domain binding). Azure Front Door and Azure Traffic Manager are global routing and load-balancing services meant for multi-region or multi-endpoint failover scenarios and are unnecessary complexity for redirecting a single custom domain to a single web app, and adding HTTP redirect rules on WEB1/WEB2 is not a viable option once those servers have been decommissioned. Therefore, adding a custom domain name to WebApp1 and then modifying the DNS record are the two required actions.

The requirement is that VMs must be configured to enable per-folder quotas. VM3 already has the File and Storage Services role installed, but native NTFS quotas only apply per volume and per user; they cannot restrict the amount of data stored inside an individual folder. File Server Resource Manager (FSRM) is the Windows Server feature that adds true folder-level quota management, letting an administrator define hard or soft quota limits (and quota templates) scoped to specific folders rather than entire volumes, which is exactly the granularity the requirement calls for. Enhanced Storage is an unrelated feature that supports certain storage devices with enhanced storage access (IEEE 1667), Windows Standards-Based Storage Management provides SMI-S/WMI-based management of storage arrays and has nothing to do with folder-level quotas, and the iSNS Server service is used for discovery of iSCSI targets and initiators on a network, also unrelated to quota enforcement. None of those three alternatives provide any per-folder capacity restriction capability, so installing FSRM is the necessary first step before per-folder quotas can be configured on VM3.

Azure Automanage currently does not support virtual machines that use the Trusted launch security type; this is an explicit, documented limitation of the service, independent of which Windows Server version or edition the VM is running. Looking at the four virtual machines ' security types, Server1 (Windows Server 2022 Datacenter: Azure Edition) and Server4 (Windows Server 2019 Datacenter) are both configured with Trusted launch, which makes both of them ineligible for Automanage onboarding regardless of their OS version. Server2 (Windows Server 2022 Datacenter: Azure Edition) and Server3 (Windows Server 2022 Datacenter) both use the Standard security type and run OS versions on Automanage ' s supported list, so both qualify and Automanage should be enabled on them to satisfy the requirement that it be used on " all supported " virtual machines, which by definition excludes the ones the service cannot onboard. It is a common misreading of this scenario to assume the Azure Edition label is the deciding factor, since Server1 and Server2 share that edition; the actual determining attribute the requirement hinges on is the VM ' s security type, not its Windows Server edition. Therefore Server2 and Server3 are the correct machines on which to enable Automanage.

hvc.exe, ssh User2@VM2

The requirement is to use a direct SSH session to manage all the supported virtual machines on HyperV1, without relying on a network path to the guest. Hyper-V provides hvc.exe, a helper used as an SSH ProxyCommand, that opens an SSH session to a virtual machine over the VMBus (the internal Hyper-V socket/console channel) rather than over the network, which works even when the guest has no reachable IP configuration and only default management tools installed, matching the stated environment. Direct SSH management this way requires the guest to run an SSH server; of the three VMs, only VM2 runs Red Hat Enterprise Linux, which includes OpenSSH server support out of the box, so it is the only VM realistically " supported " for this direct SSH scenario as described, and the account to use is User2, the local account that exists on VM2. VM1 and VM3 both run Windows Server, so " direct SSH, " as intended by this requirement, targets the Linux guest. Connect-PSSession and Connect-WSMan are PowerShell remoting tools, not SSH, and mstsc.exe launches a graphical Remote Desktop session rather than a console-mode SSH session, so none of those alternatives fit. The correct combination is hvc.exe used as the SSH proxy, connecting as User2@VM2.

Task1 is an Azure Automation runbook, and Azure Automation supports a specific, limited set of runbook types: PowerShell (and PowerShell Workflow), Python, and Graphical runbooks (which are authored visually rather than in a scripting language). Of the listed options, PowerShell and Python are the two genuine scripting languages Azure Automation lets you author a runbook in directly, making them the two correct answers. Java and JavaScript are not supported runbook languages in Azure Automation; JavaScript is used elsewhere in Azure (for example, in Azure Functions or Logic Apps custom code), but not for Automation runbooks. Bicep is a domain-specific language for declaratively defining Azure infrastructure as code (compiling down to ARM templates) and has no role as an executable runbook language; you would not write a Task1 runbook in Bicep, since runbooks execute imperative logic rather than declare resource deployments. Therefore, Python and PowerShell are the two languages available for Task1.

1. Deploy the Azure Storage Sync service. 2. Install and register the Azure File Sync agent. 3. Create a sync group. 4. Add a server endpoint.

Data1 is a file share on VM1 that must be synced to the Azure Files share1 using Azure File Sync. The documented deployment order starts in Azure: you must first deploy a Storage Sync Service resource, because the on-premises agent registration process needs an existing Storage Sync Service to register against. With that resource in place, the next step, already fixed in the sequence, is to install the Azure File Sync agent on VM1 and register the server with the Storage Sync Service, which establishes the server ' s identity and trust relationship with Azure. After registration, you create a sync group, the container that pairs one Azure file share (the cloud endpoint) with one or more on-premises folders (server endpoints); the sync group must exist before endpoints can be attached to it. Finally, you add a server endpoint pointing at the Data1 path on VM1, which starts the actual namespace and content synchronization with share1. Installing the DFS Replication role service and installing the Storage Replica feature are unrelated technologies, DFS-R replicates between on-premises servers and Storage Replica performs block-level volume replication, neither of which is part of an Azure File Sync deployment, so both are correctly excluded from the sequence.