Free Juniper JN0-649 Practice Exam with Questions & Answers

When troubleshooting an EVPN-VXLAN IP fabric loop, the following steps are crucial:

Issue the show route table bgp.evpn.0 command on Leaf2 and verify that Type 4 routes are present: Type 4 routes indicate EVPN Ethernet Segment routes, which are essential for detecting and mitigating loops.

Issue the show route table bgp.evpn.0 command on Leaf2 and verify that Type 3 routes are present: Type 3 routes (Inclusive Multicast Ethernet Tag routes) ensure that multicast and broadcast traffic is properly handled, helping identify and troubleshoot loop issues.

References:

The commands for verifying BGP EVPN routes are standard in troubleshooting EVPN-VXLAN fabrics.

Documentation from "Useful Juniper Commands.txt" and "Juniper Commands.pdf" which provide command references for verifying EVPN route types​​​​.

When video packets are being dropped, and the network is configured to use the expedited-forwarding forwarding class, it typically indicates that the scheduler assigned to this class does not have sufficient bandwidth to handle the traffic. Adjusting the scheduler to allocate more bandwidth to the expedited-forwarding class will ensure that video packets are transmitted without being dropped.

Steps:

Identify the scheduler map: First, identify the scheduler map that is applied to the interfaces. This can be done using the following command:

shell

Copy code

show configuration class-of-service scheduler-maps

Adjust the scheduler: Modify the scheduler for the expedited-forwarding forwarding class to support a higher transmit rate. You can edit the scheduler configuration to increase the bandwidth allocated.

Example:

shell

Copy code

set class-of-service schedulers expedited-forwarding transmit-rate percent 30

Apply the configuration: Apply the modified scheduler to the interfaces using the following commands:

shell

Copy code

set class-of-service interfaces ge-0/0/0 scheduler-map

set class-of-service interfaces ge-0/0/1 scheduler-map

commit

References:

Useful Juniper Commands.txt

Tech Ops Managed Router Juniper Install Guide

B - because only one next hop in forwarding table C- becuse TTL=1 limiting bgp connection to be established only over loopbacks interface https://www.juniper.net/documentation/us/en/software/junos/bgp/topics/topic-map/multihop-sessions.html Use the multihop statement to alter the default use of the neighbor 's physical address. In addition, you can also specify a time-to-live (TTL) value in the BGP packets to control how far they propagate. We use a TTL value of 1 to ensure that the session cannot be established across any other backdoor links in the network.

The leaf node is not configured for the family evpn NLRI (D):

The exhibit shows that there is an unsupported capability NP error for AFI 1, SAFI 70. This indicates that the leaf node is not configured to support the EVPN (Ethernet VPN) address family.

References:

The BGP configuration and troubleshooting details can be found in "Juniper Commands.pdf" and related EVPN configuration documents​​​​.

When two BGP routes have identical attributes (MED, origin, AS path length, local preference), BGP uses the router ID as a tie-breaker. In this case, route 2 has a higher router ID (10.10.200.1 vs. 10.10.100.1). BGP will select the route with the higher router ID as the active route.

References:

Useful Juniper Commands.txt

Tech Ops Managed Router Juniper Install Guide

 Technology Overview:

Q-in-Q (802.1ad), also known as VLAN stacking, allows multiple VLAN tags to be inserted into a single frame. This enables the carrying of multiple VLANs across a single backbone, preserving the original VLAN tags across different network segments.

 Application in Scenario:

By using Q-in-Q, the existing VLANs of the acquired company can be encapsulated within a single VLAN tag. This technique is highly efficient for carrying VLANs across a corporate backbone without altering the existing addressing scheme and with minimal configuration changes.

 Configuration Example:

Juniper Configuration:

shell

Copy code

set interfaces ge-0/0/1 unit 0 family ethernet-switching vlan-id 100

set interfaces ge-0/0/1 unit 0 family ethernet-switching vlan-id-list 100-200

set interfaces ge-0/0/2 unit 0 family ethernet-switching vlan-id 300

set interfaces ge-0/0/2 unit 0 family ethernet-switching vlan-id-list 300-400

This setup ensures that VLANs 100-200 on interface ge-0/0/1 and VLANs 300-400 on interface ge-0/0/2 are bundled together, achieving the desired encapsulation.

 References:

Detailed configuration and benefits are documented in the "network-mgmt.pdf" file, which outlines the necessary steps and considerations for deploying Q-in-Q​​.

The address range 232.0.0.0/8 is reserved for Source-Specific Multicast (SSM). This range is specifically allocated for SSM where data is sent from a specific source to the receivers.

References:

Source-Specific Multicast (SSM) Overview, RFC 4607

Step 1: Identify the requirement.

You need an OSPF area that only contains intra-area route information in the form of Type 1 and Type 2 LSAs.

Step 2: Analyze the possible OSPF area types.

Option A: Totally non-to-stubby area.

Option B: Totally stubby area.

Option C: Stub area.

Option D: Non-to-stubby area.

Step 3: Understand OSPF area types.

Totally Stubby Area (Option B): Only allows Type 1 and Type 2 LSAs and blocks Type 3, 4, and 5 LSAs. It uses a default route to represent external routes.

This fits the requirement of containing only intra-area routes.

References:

Juniper OSPF configuration guide on area types​​​​.

Commands for configuring a totally stubby area:

shell

Copy code

set protocols ospf area <area-id> stub no-summaries