Free ISC SSCP Practice Exam with Questions & Answers | Set: 13

Because a network-based IDS reviews packets and headers, denial of service attacks can also be detected.

This question is an easy question if you go through the process of elimination. When you see an answer containing the keyword: ALL It is something a give away that it is not the proper answer. On the real exam you may encounter a few question where the use of the work ALL renders the choice invalid. Pay close attention to such keyword.

The following are incorrect answers:

Even though most IDSs can detect some viruses and some password guessing attacks, they cannot detect ALL viruses or ALL password guessing attacks. Therefore these two answers are only detractors.

Unless the IDS knows the valid values for a certain dataset, it can NOT detect data corruption.

Reference used for this question:

KRUTZ, Ronald L. & VINES, Russel D., The CISSP Prep Guide: Mastering the Ten Domains of Computer Security, 2001, John Wiley & Sons, Page 48.

Companies can set predefined thresholds for the number of certain types of errors that will be allowed before the activity is considered suspicious. The threshold is a baseline for violation activities that may be normal for a user to commit before alarms are raised. This baseline is referred to as a clipping level.

The following are incorrect answers:

Clipping levels enable a security administrator to customize the audit trail to record only those violations which are deemed to be security relevant. This is not the best answer, you would not record ONLY security relevant violations, all violations would be recorded as well as all actions performed by authorized users which may not trigger a violation. This could allow you to indentify abnormal activities or fraud after the fact.

Clipping levels enable the security administrator to customize the audit trail to record only actions for users with access to user accounts with a privileged status. It could record all security violations whether the user is a normal user or a privileged user.

Clipping levels enable a security administrator to view all reductions in security levels which have been made to user accounts which have incurred violations. The keyword "ALL" makes this question wrong. It may detect SOME but not all of violations. For example, application level attacks may not be detected.

Reference(s) used for this question:

Harris, Shon (2012-10-18). CISSP All-in-One Exam Guide, 6th Edition (p. 1239). McGraw-Hill. Kindle Edition.

and

TIPTON, Hal, (ISC)2, Introduction to the CISSP Exam presentation.

Source: KRUTZ, Ronald L. & VINES, Russel D., The CISSP Prep Guide: Mastering the Ten Domains of Computer Security, 2001, John Wiley & Sons, Page 49.

To assist in Intrusion Detection you would review audit logs for access violations.

The following answers are incorrect:

access control lists. This is incorrect because access control lists determine who has access to what but do not detect intrusions.

security clearances. This is incorrect because security clearances determine who has access to what but do not detect intrusions.

host-based authentication. This is incorrect because host-based authentication determine who have been authenticated to the system but do not dectect intrusions.

A network-based IDS usually provides reliable, real-time information without consuming network or host resources.

Source: KRUTZ, Ronald L. & VINES, Russel D., The CISSP Prep Guide: Mastering the Ten Domains of Computer Security, 2001, John Wiley & Sons, Page 48.

A weakness of the signature-based (or knowledge-based) intrusion detection approach is that only attack signatures that are stored in a database are detected. Network-based intrusion detection can either be signature-based or statistical anomaly-based (also called behavior-based).

Source: KRUTZ, Ronald L. & VINES, Russel D., The CISSP Prep Guide: Mastering the Ten Domains of Computer Security, John Wiley & Sons, 2001, Chapter 2: Access control systems (page 49).

The best way to prevent and detect software license violations is to regularly scan used PCs, either from the LAN or directly, to ensure that unauthorized copies of software have not been loaded on the PC.

Other options are not detective.

A corporate policy is not necessarily enforced and followed by all employees.

Software can be installed from other means than floppies or CD-ROMs (from a LAN or even downloaded from the Internet) and software metering only concerns applications that are registered.

Source: Information Systems Audit and Control Association, Certified Information Systems Auditor 2002 review manual, Chapter 3: Technical Infrastructure and Operational Practices (page 108).

There are two conceptual approaches to intrusion detection. Knowledge-based intrusion detection uses a database of known vulnerabilities to look for current attempts to exploit them on a system and trigger an alarm if an attempt is found. The other approach, not as common, is called behaviour-based or statistical analysis-based. A host-based intrusion detection system is a common implementation of intrusion detection, not a conceptual approach.

Source: KRUTZ, Ronald L. & VINES, Russel D., The CISSP Prep Guide: Mastering the Ten Domains of Computer Security, John Wiley & Sons, 2001, Chapter 3: Telecommunications and Network Security (page 63).

Also: HARRIS, Shon, All-In-One CISSP Certification Exam Guide, McGraw-Hill/Osborne, 2002, chapter 4: Access Control (pages 193-194).

A host-based IDS is resident on a host and reviews the system and event logs in order to detect an attack on the host and to determine if the attack was successful. All critical serves should have a Host Based Intrusion Detection System (HIDS) installed. As you are well aware, network based IDS cannot make sense or detect pattern of attacks within encrypted traffic. A HIDS might be able to detect such attack after the traffic has been decrypted on the host. This is why critical servers should have both NIDS and HIDS.

FROM WIKIPEDIA:

A HIDS will monitor all or part of the dynamic behavior and of the state of a computer system. Much as a NIDS will dynamically inspect network packets, a HIDS might detect which program accesses what resources and assure that (say) a word-processor hasn\'t suddenly and inexplicably started modifying the system password-database. Similarly a HIDS might look at the state of a system, its stored information, whether in RAM, in the file-system, or elsewhere; and check that the contents of these appear as expected.

One can think of a HIDS as an agent that monitors whether anything/anyone - internal or external - has circumvented the security policy that the operating system tries to enforce.

http://en.wikipedia.org/wiki/Host-based_intrusion_detection_system

Officers and directors of a company are expected to act carefully in fulfilling their tasks. A director shall act in good faith, with the care an ordinarily prudent person in a like position would exercise under similar circumstances and in a manner he reasonably believes is in the best interest of the enterprise. The notion of profit would tend to go against the due care principle.

Source: ANDRESS, Mandy, Exam Cram CISSP, Coriolis, 2001, Chapter 10: Law, Investigation, and Ethics (page 186).

Some disadvantages of a statistical anomaly-based ID are that it will not detect an attack that does not significantly change the system operating characteristics, or it may falsely detect a non-attack event that had caused a momentary anomaly in the system.

Source: KRUTZ, Ronald L. & VINES, Russel D., The CISSP Prep Guide: Mastering the Ten Domains of Computer Security, 2001, John Wiley & Sons, Page 49.

The biggest drawback of HIDS, and the reason many organizations resist its use, is that it can be very invasive to the host operating system. HIDS must have the capability to monitor all processes and activities on the host system and this can sometimes interfere with normal system processing.

HIDS versus NIDS

A host-based IDS (HIDS) can be installed on individual workstations and/ or servers to watch for inappropriate or anomalous activity. HIDSs are usually used to make sure users do not delete system files, reconfigure important settings, or put the system at risk in any other way.

So, whereas the NIDS understands and monitors the network traffic, a HIDS’s universe is limited to the computer itself. A HIDS does not understand or review network traffic, and a NIDS does not “look in” and monitor a system’s activity. Each has its own job and stays out of the other’s way.

The ISC2 official study book defines an IDS as:

An intrusion detection system (IDS) is a technology that alerts organizations to adverse or unwanted activity. An IDS can be implemented as part of a network device, such as a router, switch, or firewall, or it can be a dedicated IDS device monitoring traffic as it traverses the network. When used in this way, it is referred to as a network IDS, or NIDS. IDS can also be used on individual host systems to monitor and report on file, disk, and process activity on that host. When used in this way it is referred to as a host-based IDS, or HIDS.

An IDS is informative by nature and provides real-time information when suspicious activities are identified. It is primarily a detective device and, acting in this traditional role, is not used to directly prevent the suspected attack.

What about IPS?

In contrast, an intrusion prevention system (IPS), is a technology that monitors activity like an IDS but will automatically take proactive preventative action if it detects unacceptable activity. An IPS permits a predetermined set of functions and actions to occur on a network or system; anything that is not permitted is considered unwanted activity and blocked. IPS is engineered specifically to respond in real time to an event at the system or network layer. By proactively enforcing policy, IPS can thwart not only attackers, but also authorized users attempting to perform an action that is not within policy. Fundamentally, IPS is considered an access control and policy enforcement technology, whereas IDS is considered network monitoring and audit technology.

The following answers were incorrect:

All of the other answer were advantages and not drawback of using HIDS

TIP FOR THE EXAM:

Be familiar with the differences that exists between an HIDS, NIDS, and IPS. Know that IDS's are mostly detective but IPS are preventive. IPS's are considered an access control and policy enforcement technology, whereas IDS's are considered network monitoring and audit technology.

Reference(s) used for this question:

Harris, Shon (2012-10-25). CISSP All-in-One Exam Guide, 6th Edition (Kindle Locations 5817-5822). McGraw-Hill. Kindle Edition.

and

Schneiter, Andrew (2013-04-15). Official (ISC)2 Guide to the CISSP CBK, Third Edition : Access Control ((ISC)2 Press), Domain1, Page 180-188 or on the kindle version look for Kindle Locations 3199-3203. Auerbach Publications.

Network-based ID systems:

- Commonly reside on a discrete network segment and monitor the traffic on that network segment

- Usually consist of a network appliance with a Network Interface Card (NIC) that is operating in promiscuous mode and is intercepting and analyzing the network packets in real time

"A passive NIDS takes advantage of promiscuous mode access to the network, allowing it to gain visibility into every packet traversing the network segment. This allows the system to inspect packets and monitor sessions without impacting the network, performance, or the systems and applications utilizing the network."

NOTE FROM CLEMENT:

A discrete network is a synonym for a SINGLE network. Usually the sensor will monitor a single network segment, however there are IDS today that allow you to monitor multiple LAN's at the same time.

References used for this question:

KRUTZ, Ronald L. & VINES, Russel D., The CISSP Prep Guide: Mastering the Ten Domains of Computer Security, 2001, John Wiley & Sons, Page 62.

and

Official (ISC)2 Guide to the CISSP CBK, Hal Tipton and Kevin Henry, Page 196

and

Additional information on IDS systems can be found here: http://en.wikipedia.org/wiki/Intrusion_detection_system

The data or information owner also referred to as "Data Owner" would be the best person. That is the individual or officer who is ultimately responsible for the protection of the information and can therefore decide what are the adequate security controls according to the data sensitivity and data criticality. The auditor would be the best person to determine the adequacy of controls and whether or not they are working as expected by the owner.

The function of the auditor is to come around periodically and make sure you are doing what you are supposed to be doing. They ensure the correct controls are in place and are being maintained securely. The goal of the auditor is to make sure the organization complies with its own policies and the applicable laws and regulations.

Organizations can have internal auditors and/ or external auditors. The external auditors commonly work on behalf of a regulatory body to make sure compliance is being met. For example CobiT, which is a model that most information security auditors follow when evaluating a security program. While many security professionals fear and dread auditors, they can be valuable tools in ensuring the overall security of the organization. Their goal is to find the things you have missed and help you understand how to fix the problem.

The Official ISC2 Guide (OIG) says:

IT auditors determine whether users, owners, custodians, systems, and networks are in compliance with the security policies, procedures, standards, baselines, designs, architectures, management direction, and other requirements placed on systems. The auditors provide independent assurance to the management on the appropriateness of the security controls. The auditor examines the information systems and determines whether they are designed, configured, implemented, operated, and managed in a way ensuring that the organizational objectives are being achieved. The auditors provide top company management with an independent view of the controls and their effectiveness.

Example:

Bob is the head of payroll. He is therefore the individual with primary responsibility over the payroll database, and is therefore the information/data owner of the payroll database. In Bob's department, he has Sally and Richard working for him. Sally is responsible for making changes to the payroll database, for example if someone is hired or gets a raise. Richard is only responsible for printing paychecks. Given those roles, Sally requires both read and write access to the payroll database, but Richard requires only read access to it. Bob communicates these requirements to the system administrators (the "information/data custodians") and they set the file permissions for Sally's and Richard's user accounts so that Sally has read/write access, while Richard has only read access.

So in short Bob will determine what controls are required, what is the sensitivily and criticality of the Data. Bob will communicate this to the custodians who will implement the requirements on the systems/DB. The auditor would assess if the controls are in fact providing the level of security the Data Owner expects within the systems/DB. The auditor does not determine the sensitivity of the data or the crititicality of the data.

The other answers are not correct because:

A "system auditor" is never responsible for anything but auditing... not actually making control decisions but the auditor would be the best person to determine the adequacy of controls and then make recommendations.

A "system manager" is really just another name for a system administrator, which is actually an information custodian as explained above.

A "Data or information user" is responsible for implementing security controls on a day-to-day basis as they utilize the information, but not for determining what the controls should be or if they are adequate.

References:

Official ISC2 Guide to the CISSP CBK, Third Edition , Page 477

Schneiter, Andrew (2013-04-15). Official (ISC)2 Guide to the CISSP CBK, Third Edition : Information Security Governance and Risk Management ((ISC)2 Press) (Kindle Locations 294-298). Auerbach Publications. Kindle Edition.

Harris, Shon (2012-10-25). CISSP All-in-One Exam Guide, 6th Edition (Kindle Locations 3108-3114).

Information Security Glossary

Responsibility for use of information resources

Is a means of being able to track user actions. Through the use of audit logs and other tools the user actions are recorded and can be used at a later date to verify what actions were performed.

Accountability is the ability to identify users and to be able to track user actions.

The following answers are incorrect:

Documented design as laid out in the Common Criteria. Is incorrect because the Common Criteria is an international standard to evaluate trust and would not be a factor in System Accountability.

Authorization. Is incorrect because Authorization is granting access to subjects, just because you have authorization does not hold the subject accountable for their actions.

Formal verification of system design. Is incorrect because all you have done is to verify the system design and have not taken any steps toward system accountability.

References:

OIG CBK Glossary (page 778)

A HIDS does not consume large amounts of system resources is the correct choice. HIDS can consume inordinate amounts of CPU and system resources in order to function effectively, especially during an event.

All the other answers are characteristics of HIDSes

A HIDS can:

scrutinize event logs, critical system files, and other auditable system resources;

look for unauthorized change or suspicious patterns of behavior or activity

can send alerts when unusual events are discovered

As per FDA data should be attributable, original, accurate, contemporaneous and legible. In an automated system attributability could be achieved by a computer system designed to identify individuals responsible for any input.

Source: U.S. Department of Health and Human Services, Food and Drug Administration, Guidance for Industry - Computerized Systems Used in Clinical Trials, April 1999, page 1.

Layer 5 of the OSI model is the Session Layer. This layer provides a logical persistent connection between peer hosts. A session is analogous to a conversation that is necessary for applications to exchange information.

The session layer is responsible for establishing, managing, and closing end-to-end connections, called sessions, between applications located at different network endpoints. Dialogue control management provided by the session layer includes full-duplex, half-duplex, and simplex communications. Session layer management also helps to ensure that multiple streams of data stay synchronized with each other, as in the case of multimedia applications like video conferencing, and assists with the prevention of application related data errors.

The session layer is responsible for creating, maintaining, and tearing down the session.

Three modes are offered:

(Full) Duplex: Both hosts can exchange information simultaneously, independent of each other.

Half Duplex: Hosts can exchange information, but only one host at a time.

Simplex: Only one host can send information to its peer. Information travels in one direction only.

Another aspect of performance that is worthy of some attention is the mode of operation of the network or connection. Obviously, whenever we connect together device A and device B, there must be some way for A to send to B and B to send to A. Many people don’t realize, however, that networking technologies can differ in terms of how these two directions of communication are handled. Depending on how the network is set up, and the characteristics of the technologies used, performance may be improved through the selection of performance-enhancing modes.

Basic Communication Modes of Operation

Let's begin with a look at the three basic modes of operation that can exist for any network connection, communications channel, or interface.

Simplex Operation

In simplex operation, a network cable or communications channel can only send information in one direction; it's a “one-way street”. This may seem counter-intuitive: what's the point of communications that only travel in one direction? In fact, there are at least two different places where simplex operation is encountered in modern networking.

The first is when two distinct channels are used for communication: one transmits from A to B and the other from B to A. This is surprisingly common, even though not always obvious. For example, most if not all fiber optic communication is simplex, using one strand to send data in each direction. But this may not be obvious if the pair of fiber strands are combined into one cable.

Simplex operation is also used in special types of technologies, especially ones that are asymmetric. For example, one type of satellite Internet access sends data over the satellite only for downloads, while a regular dial-up modem is used for upload to the service provider. In this case, both the satellite link and the dial-up connection are operating in a simplex mode.

Half-Duplex Operation

Technologies that employ half-duplex operation are capable of sending information in both directions between two nodes, but only one direction or the other can be utilized at a time. This is a fairly common mode of operation when there is only a single network medium (cable, radio frequency and so forth) between devices.

While this term is often used to describe the behavior of a pair of devices, it can more generally refer to any number of connected devices that take turns transmitting. For example, in conventional Ethernet networks, any device can transmit, but only one may do so at a time. For this reason, regular (unswitched) Ethernet networks are often said to be “half-duplex”, even though it may seem strange to describe a LAN that way.

Full-Duplex Operation

In full-duplex operation, a connection between two devices is capable of sending data in both directions simultaneously. Full-duplex channels can be constructed either as a pair of simplex links (as described above) or using one channel designed to permit bidirectional simultaneous transmissions. A full-duplex link can only connect two devices, so many such links are required if multiple devices are to be connected together.

Note that the term “full-duplex” is somewhat redundant; “duplex” would suffice, but everyone still says “full-duplex” (likely, to differentiate this mode from half-duplex).

For a listing of protocols associated with Layer 5 of the OSI model, see below:

ADSP - AppleTalk Data Stream Protocol

ASP - AppleTalk Session Protocol

H.245 - Call Control Protocol for Multimedia Communication

ISO-SP

OSI session-layer protocol (X.225, ISO 8327)

iSNS - Internet Storage Name Service

The following are incorrect answers:

Synchronous and Asynchronous are not session layer modes.

Half simplex does not exist. By definition, simplex means that information travels one way only, so half-simplex is a oxymoron.

Reference(s) used for this question:

Hernandez CISSP, Steven (2012-12-21). Official (ISC)2 Guide to the CISSP CBK, Third Edition ((ISC)2 Press) (Kindle Locations 5603-5636). Auerbach Publications. Kindle Edition.

and

http://www.tcpipguide.com/free/t_SimplexFullDuplexandHalfDuplexOperation.htm

and

http://www.wisegeek.com/what-is-a-session-layer.htm

By reviewing system logs you can detect events that have occured.

The following answers are incorrect:

avoidance. This is incorrect, avoidance is a distractor. By reviewing system logs you have not avoided anything.

deterrence. This is incorrect because system logs are a history of past events. You cannot deter something that has already occurred.

prevention. This is incorrect because system logs are a history of past events. You cannot prevent something that has already occurred.

The security controls and mechanisms that are in place must have a degree of transparency.

This enables the user to perform tasks and duties without having to go through extra steps because of the presence of the security controls. Transparency also does not let the user know too much about the controls, which helps prevent him from figuring out how to circumvent them. If the controls are too obvious, an attacker can figure out how to compromise them more easily.

Security (more specifically, the implementation of most security controls) has long been a sore point with users who are subject to security controls. Historically, security controls have been very intrusive to users, forcing them to interrupt their work flow and remember arcane codes or processes (like long passwords or access codes), and have generally been seen as an obstacle to getting work done. In recent years, much work has been done to remove that stigma of security controls as a detractor from the work process adding nothing but time and money. When developing access control, the system must be as transparent as possible to the end user. The users should be required to interact with the system as little as possible, and the process around using the control should be engineered so as to involve little effort on the part of the user.

For example, requiring a user to swipe an access card through a reader is an effective way to ensure a person is authorized to enter a room. However, implementing a technology (such as RFID) that will automatically scan the badge as the user approaches the door is more transparent to the user and will do less to impede the movement of personnel in a busy area.

In another example, asking a user to understand what applications and data sets will be required when requesting a system ID and then specifically requesting access to those resources may allow for a great deal of granularity when provisioning access, but it can hardly be seen as transparent. A more transparent process would be for the access provisioning system to have a role-based structure, where the user would simply specify the role he or she has in the organization and the system would know the specific resources that user needs to access based on that role. This requires less work and interaction on the part of the user and will lead to more accurate and secure access control decisions because access will be based on predefined need, not user preference.

When developing and implementing an access control system special care should be taken to ensure that the control is as transparent to the end user as possible and interrupts his work flow as little as possible.

The following answers were incorrect:

All of the other detractors were incorrect.

Reference(s) used for this question:

HARRIS, Shon, All-In-One CISSP Certification Exam Guide, 6th edition. Operations Security, Page 1239-1240

Harris, Shon (2012-10-25). CISSP All-in-One Exam Guide, 6th Edition (Kindle Locations 25278-25281). McGraw-Hill. Kindle Edition.

Schneiter, Andrew (2013-04-15). Official (ISC)2 Guide to the CISSP CBK, Third Edition : Access Control ((ISC)2 Press) (Kindle Locations 713-729). Auerbach Publications. Kindle Edition.