Free HP HPE6-A69 Practice Exam with Questions & Answers

Name: How to Pass HPE6-A69 Exams
Brand: Examstrack
SKU: hpe6-a69
Price: 42 USD
Availability: InStock

Questions 1

A network administrator has deployed the following (partial) configuration:

HPE6-A69 Question 1

What is the effect of this policy?

Options:

Only subnet 10.254.254.0/24 is allowed to communicate with ip-addresses configured on VRF mgmt

COPP traffic is restricted to subnet 10.254.254 0/24

Only ssh traffic to ip-address in VRF mgmt is restricted to 10 254 254 0/24 network

Only subnet 10.254 2540/24 is allowed to communicate with CoPP-addresses configured on VRF mgmt

HP HPE6-A69 Premium Access

Adla

24-Apr-2025

examstrack.com's competent IT experts provided invaluable guidance for my HPE6-A69 certification journey. Highly recommend!

Questions 2

The customer is already using Aruba Gateway and third-party L2 switches New ArubaOS CX 6300 switches have been deployed for R&D. which have a requirement for user profiling and tunneled traffic between ArubaOS CX 6300 and Aruba Gateway

What is required for this configuration to apply QoS user-based rules for the R&D client traffic?

Options:

Apply a QoS rule to the ArubaCX 6300 client port, lo classify traffic before it is tunneled.

Apply a port-access policy with QoS defined in the user role on the ArubaOS CX6300 switch

Manually prioritize IP protocol 47 traffic on the third-party switches to prioritize the tunneled traffic

Create a QoS policy for the UBT-client-VLAN traffic on the third-party switch.

Questions 3

You have removed a member out of the ArubaOS-CX 6300 VSF configuration. The login to the removed member falls. What is true about switch login recovery?

Options:

The task requires physical access to the switch

The zeroize task executes the zeroize.txt from the root of the CF card on the switch

The zeroize task will remove all user passwords: the configuration remains on the switch

The task can be executed remotely

Questions 4

(Scenarios may contain multiple errors which may or may not impact the solution)

Refer to the Exhibit.

HPE6-A69 Question 4

An engineer has attempted to configure two pairs of switches m the referenced configuration it Is required to implement

Multi-Chassis Link Aggregation for each pair of switches

The ports of the Aruba 8325 switches used for Agg01 and Agg02 are populated as follows

HPE6-A69 Question 4

The configuration includes:

HPE6-A69 Question 4

There is an error message stating "mismatched group speed" What should you add to the configuration to correct the error?

Options:

"system Interface-group 1 speed I0g"

"allow-unsupported-transceiver

"speed 10-full" under interfaces 1/1/12 and 1/1/13

"speed 40-full" under interfaces 1/1/49 and 1/1/50

Questions 5

The rate-limiting QoS feature can be implemented on all ArubaOS-CX platforms However, some features are platform dependent. Which statements are true'' (Select two.)

Options:

Unknown unicast rate limiting is supported on all ArubaOS-CX platforms

ICMP-Rate limiting is supported on all ArubaOS-CX platforms.

Broadcast-rate limiting is supported on all ArubaOS-CX platforms

Multicast and broadcast rate limits cannot be applied at the same time on the same Interface

Questions 6

With the given topology, the customer Has ArubaOS-CX 6300 switches and Aruba Gateway in use.

HPE6-A69 Question 6

What is required for the client traffic to be tunneled as per best practice between the connected switch port and the Aruba Gateway'' (Select two.)

Options:

IP Protocol 6 should not be blocked on me datapath

IP Protocol 47 should not be blocked in the data-path

The ArubaOS-CX switch and Aruba gateway should have an end-to-end MacSec connection

The ArubaOS-CX switch and Aruba gateway should be EBGP peers.

Change the default MTU on the data-path between the switch and gateway

Questions 7

A client connected to Aruba CX 6300 on Port vt/2 Is having issues connecting to a remote destination 10 100 10 62 port 443. How should you get session-specific diagnostic information about this connection?

Options:

Use diag utilities tcpdump desttnation-ip 10 10010.62 to capture the session

Use diag utilities tcpdump destination-prefix 10 100 10.62/32 to capture the session

Run tcpdump -interface "1/1/2" host 10.100 10.62 to capture the session

Enter diag-mode and execute tcpdump ip.addr==10.100.10.62.

Questions 8

Before designing a new network solution for a customer with between 2398 and 5264 employees, you should gamer Information from the customer about their wired network needs.

What are valid questions to determine their wired network needs? (Select two.)

Options:

How experienced is your networking team?

What is the current cabling deployed in the location?

What are the current device capabilities and topology?

Do you plan to add new customer services?

How much do you plan to spend in the new wired network?

Questions 9

A customer is migrating from a Cisco VSS system to an ArubaOS-CX VSX cluster in order to provide default gateway functionality, the local network administrator creates VLAN interfaces The network administrator then migrates successfully from Cisco to Aruba

The next day a manager asks if the solution is redundant. The network administrator realizes that there is no redundancy on the default gateway functionality

What is the preferred solution with the least amount of configuration and disturbance?

Options:

Remove the IP address on every VLAN interface, and replace it with another one in the same subnet Configure active gateway IP with the default gateway address on every VLAN interface on Doth switches

For every VLAN Interface, configure a VRRP IP address with the same IP address as already present in the first VSX node. Configure this on both switches.

Remove the IP address on every VLAN interface, and replace it with another one in the same subnet Configure VRRP with the default gateway address as virtual IP-address per VLAN.

For every VLAN interface, configure an active gateway IP with the same IP address as already present in the first VSX node Configure this on both switches

Questions 10

Refer to the exhibit.

HPE6-A69 Question 10