Free EMC DES-1D12 Practice Exam with Questions & Answers | Set: 4

A fully scaled-out Dell PowerStore T cluster requires at least two instances of PowerStore Manager to ensure high availability. This is because the PowerStore Manager provides a centralized management and monitoring interface for the cluster, and having multiple instances of it allows for redundancy in case one instance becomes unavailable.

The LCC interface sits between the CPU board and the NVMe drives onboard Dell PowerStore components. The LCC interface is responsible for controlling the PCIe links between the CPU board and NVMe drives and allows for communication between the two. It also provides additional features such as error correction and power management for the NVMe drives.

The assisted migration allows you to move data to a new storage pool with more capacity. This process can be done while the data is still online and accessible to hosts, and it allows you to add or replace drives, expand pools, and move data to a new array without any disruption.

The minimum RPO (Recovery Point Objective) that can be configured on a Dell Unity XT block-asynchronous replication session is 5 minutes. RPO is a measure of how much data can be lost in the event of a disaster, and it's typically measured in minutes. The lower the RPO, the less data can be lost. Block-asynchronous replication is a replication method that copies data blocks, rather than files, between the source and the target. The data is copied at regular intervals, and if a disaster occurs at any point in time, the data on the target will be no more than 5 minutes old. The shorter the RPO, the more frequently data is copied and the less data is at risk of being lost in case of a disaster. It's important to note that this is the minimum RPO for block-asynchronous replication, it can be set to a higher value if needed.

The maximum capacity of a file system on a Dell Unity XT 380 can be up to 256 TB. This high capacity is possible due to the advanced storage features such as data reduction, data tiering and use of high-density drives. The file system capacity can be increased by adding more drives, and by configuring the storage pool and LUNs in a way that maximizes storage utilization and performance. It's important to note that this may vary depending on the specific version and software of the Dell Unity XT 380.

https://www.delltechnologies.com/resources/en-us/asset/data-sheets/products/storage/h18143-dell-emc-powerstore-family-spec-sheet.pdf

A node can tolerate a single fan module fault, and the surviving fans increase their speed to compensate for the faulted module. If two fan modules fault within the same node, the node performs a protective thermal shutdown. A protective thermal shutdown gracefully powers off the node, and any resource fails over to the surviving node

Table 3. Dell EMC Unity X80/F Model Comparison

The technical architect should recommend enabling data reduction storage service when the system has free capacity above 80%. Data reduction technologies such as compression and deduplication reduce the amount of storage needed by eliminating duplicates and compressing data. However, these technologies can consume additional resources, particularly CPU. Enabling data reduction on a system that is already running low on free capacity would create additional resource contention and negatively impact performance.