Free EMC DEA-5TT2 Practice Exam with Questions & Answers | Set: 2

Name: How to Pass DEA-5TT2 Exams
Brand: Examstrack
SKU: dea-5tt2
Price: 42 USD
Availability: InStock

Questions 11

Which IEEE standard defines the Data Link Layer, Discovery protocol?

Options:

802.1AB B. 802.1AX C. 802.1D D. 802.1W

EMC DEA-5TT2 Premium Access

Derek

05-Jul-2025

examstrack.com's DEA-5TT2 study material is top-notch. Their support team ensures success for sure.

Questions 12

A Dell EMC Networking N-Series switch is configured on a port channel with LACP using the interfaces Te1/0/1 and Te1/0/2. How is the egress traffic distributed among the interfaces?

Options:

Traffic overflow will be sent to the second interface

Interfaces will be used in active/passive

Load balanced per packet using round robin

Load balanced using a hash function

Questions 13

Which option is used to configure Network Address Translation (NAT) to provide one-to-one mapping between local and global addresses?

Options:

Outside source static

Overload

Inside source static

PAT

Questions 14

A VLAN has been configured to have an IPv6 address and a stateless address autoconfiguration for clients. Which IPv6 address prefix will the default gateway have on a client?

Options:

fd01::/64

fe08::/64

fe80::/64

ff02::/8

Questions 15

A network administrator has a Dell EMC switch that has been configured with several VLANs. Each VLAN switch virtual interface (SVI) has an IP address assigned to it with each of them on different subnets. In addition, routing has been enabled on the switch.

Which action occurs when the switch receives a packet on one of its SVIs but the destination IP address of the packet does not match the IP address of that SVI?

Options:

Switch checks its routing table and forwards the packet accordingly.

Switch duplicates the packet and sends it to all interfaces.

Switch replies back to the source with an ICMP Reject packet.

Switch drops the packet.

Questions 16

What accurately describes OSPF?

Options:

Interior gateway link-state protocol

Exterior gateway distance-vector protocol

Interior gateway distance-vector protocol

Interior gateway path-vector protocol

Questions 17

A network administrator is troubleshooting an OSPF routing issue. There are two paths to a destination network from one switch. In addition, one path is comprised of four 1 Gb links. The other path is comprised of two 1 Gb and two 100 Mb links. The administrator ran several trace routes and notices that the packets are swapping back and forth between the two paths.

Which corrective action must be taken on the switch infrastructure to correct this issue?

Options:

Manually specify the OSPF Router ID on each switch within the path.

Break the paths into multiple OSPF areas.

Change the reference speed used by OSPF in cost calculations on all switches within the path.

Switch all routing protocols to RIPv2.

Questions 18

What is the valid range assigned to a client during a TCP connection?

Options:

20 - 25

443 - 1000

1023 - 2024