Free ECCouncil 312-50v12 Practice Exam with Questions & Answers | Set: 5

A dictionary Attack as an attack vector utilized by the attacker to break in a very system, that is password protected, by golf shot technically each word in a very dictionary as a variety of password for that system. This attack vector could be a variety of Brute Force Attack.

The lexicon will contain words from an English dictionary and conjointly some leaked list of commonly used passwords and once combined with common character substitution with numbers, will generally be terribly effective and quick.

How is it done?

Basically, it’s attempting each single word that’s already ready. it’s done victimization machine-controlled tools that strive all the possible words within the dictionary.

Some password Cracking Software:

• John the ripper

• L0phtCrack

• Aircrack-ng

Windows TTL 128, Linux TTL 64, OpenBSD 255 ... https://subinsb.com/default-device-ttl-values/

Time to Live (TTL) represents to number of 'hops' a packet can take before it is considered invalid. For Windows/Windows Phone, this value is 128. This value is 64 for Linux/Android.

The network is using an uncrackable encryption method, which makes it difficult to crack the Wi-Fi password. WPA2 Personal with AES encryption is the strongest form of security offered by Wi-Fi devices at the moment, and it should be used for all purposes. AES stands for Advanced Encryption Standard, and it is a symmetric-key algorithm that uses a 128-bit, 192-bit, or 256-bit key to encrypt and decrypt data. AES is considered to be uncrackable by brute force attacks, as it would take an impractical amount of time and computational power to try all possible key combinations12. Therefore, unless you have access to the Wi-Fi password or the encryption key, you will not be able to decrypt the network traffic and crack the password.

The other options are not correct for the following reasons:

• A. The Wi-Fi password is too complex and long: This option is not relevant because the Wi-Fi password is not directly used to encrypt the network traffic. Instead, the password is used to generate a Pre-Shared Key (PSK), which is then used to derive a Pairwise Master Key (PMK), which is then used to derive a Pairwise Transient Key (PTK), which is then used to encrypt the data. Therefore, the complexity and length of the password do not affect the encryption strength, as long as the password is not easily guessed or leaked34.
• B. Your hacking tool is outdated: This option is not plausible because even if your hacking tool is outdated, it would not affect your ability to capture the network traffic and attempt to crack the password. The hacking tool may not support the latest Wi-Fi standards or protocols, but it should still be able to capture the raw data packets and save them in a file. The cracking process would depend on the encryption algorithm and the key, not on the hacking tool.
• D. The network is using MAC address filtering: This option is not feasible because MAC address filtering is a technique that restricts network access and communication to trusted devices based on their MAC addresses, which are unique identifiers assigned to network interfaces. MAC address filtering can prevent unauthorized devices from joining the network, but it cannot prevent authorized devices from capturing the network traffic. Moreover, MAC address filtering can be easily bypassed by spoofing the MAC address of an allowed device56.

References:

• 1: What is AES Encryption and How Does it Work? | Kaspersky
• 2: AES Encryption: Everything You Need to Know | Comparitech
• 3: How Does WPA2 Work? | Techwalla
• 4: How Does WPA2 Encryption Work? | Security Boulevard
• 5: What is MAC Address Filtering? | Definition, Types & Examples - Fortinet
• 6: How to Bypass MAC Address Filtering on Wireless Networks - Null Byte :: WonderHowTo

The host discovery technique that the tester should use is TCP SYN Ping Scan. This technique sends a TCP SYN packet to a specified port on the target host and waits for a response. If the host responds with a TCP SYN/ACK packet, it means the host is alive and the port is open. If the host responds with a TCP RST packet, it means the host is alive but the port is closed. If the host does not respond at all, it means the host is either dead or filtered by a firewall12. TCP SYN Ping Scan can bypass firewall restrictions because it mimics the initial stage of a TCP three-way handshake, which is a common and legitimate network activity. Therefore, most firewalls will allow TCP SYN packets to pass through and reach the target host, unless they are configured to block specific ports or IP addresses3. TCP SYN Ping Scan can also accurately identify live systems because it does not rely on ICMP, which may be blocked or rate-limited by some firewalls or routers.

The other options are not as effective or feasible as TCP SYN Ping Scan for the following reasons:

• A. UDP Ping Scan: This technique sends a UDP packet to a specified port on the target host and waits for a response. If the host responds with an ICMP Port Unreachable message, it means the host is alive but the port is closed. If the host does not respond at all, it means the host is either dead, the port is open, or the packet is filtered by a firewall12. UDP Ping Scan may not bypass firewall restrictions because some firewalls may block or drop UDP packets, especially if they are sent to uncommon or reserved ports. UDP Ping Scan may also not accurately identify live systems because it cannot distinguish between open ports and filtered packets, and it may generate false positives or negatives due to packet loss or rate-limiting.
• B. ICMP ECHO Ping Scan: This technique sends an ICMP ECHO Request packet to the target host and waits for an ICMP ECHO Reply packet. If the host responds with an ICMP ECHO Reply packet, it means the host is alive. If the host does not respond at all, it means the host is either dead or filtered by a firewall12. ICMP ECHO Ping Scan may not bypass firewall restrictions because some firewalls may block or drop ICMP packets, especially if they are sent to prevent ping sweeps or denial-of-service attacks. ICMP ECHO Ping Scan may also not accurately identify live systems because it may generate false positives or negatives due to packet loss or rate-limiting.
• C. ICMP Timestamp Ping Scan: This technique sends an ICMP Timestamp Request packet to the target host and waits for an ICMP Timestamp Reply packet. If the host responds with an ICMP Timestamp Reply packet, it means the host is alive. If the host does not respond at all, it means the host is either dead or filtered by a firewall12. ICMP Timestamp Ping Scan may not bypass firewall restrictions because some firewalls may block or drop ICMP packets, especially if they are sent to prevent ping sweeps or denial-of-service attacks. ICMP Timestamp Ping Scan may also not accurately identify live systems because it may generate false positives or negatives due to packet loss or rate-limiting.

References:

• 1: Host Discovery in Nmap Network Scanning - GeeksforGeeks
• 2: nmap Host Discovery Techniques
• 3: TCP SYN Ping Scan - Nmap
• : Ping Sweep - an overview | ScienceDirect Topics
• : UDP Ping Scan - Nmap
• : UDP Ping Scan - an overview | ScienceDirect Topics
• : ICMP Ping Scan - Nmap
• : ICMP Ping Scan - an overview | ScienceDirect Topics

Restrict results to those of a certain filetype. E.g., PDF, DOCX, TXT, PPT, etc. Note: The “ext:” operator can also be used—the results are identical.

Example: apple filetype:pdf / apple ext:pdf