Free CWNP CWAP-404 Practice Exam with Questions & Answers

A PHY header is added to the PSDU at the PHY layer. A PHY header is a part of the PPDU that contains information such as modulation, coding, and data rate. The PHY header is added by the PHY layer when it converts a PSDU to a PPDU for transmission, or removed by the PHY layer when it converts a PPDU to a PSDU for reception. The other layers do not add or remove a PHY header. References: [Wireless Analysis Professional Study Guide CWAP-404], Chapter 4: 802.11 Physical Layer, page 97-98

A capture visualization tool is a software application that can open a packet capture file and display various graphs, charts, tables, and statistics that illustrate the characteristics and behavior of the wireless network. A capture visualization tool can help a network administrator with little knowledge of 802.11 protocols to evaluate the overall health and performance of their wireless network by providing a visual and intuitive representation of the captured data. A spectrum analyzer is a hardware device that measures the radio frequency signals in a given frequency range and displays their amplitude, frequency, and modulation. A spectrum analyzer can help identify sources of interference and noise in the wireless environment, but it cannot open a packet capture file. Python is a programming language that can be used to write scripts or applications that manipulate or analyze packet capture files, but it requires coding skills and knowledge of 802.11 protocols. A WLAN scanner is a software application that scans for available wireless networks and displays information such as SSID, BSSID, channel, signal strength, security type, and vendor. A WLAN scanner can help discover wireless networks and their basic parameters, but it cannot open a packet capture file345 References:

• CWAP-404 Study Guide, Chapter 2: Protocol Analysis, page 63
• CWAP-404 Objectives, Section 2.5: Use capture visualization tools
• CWAP-404 Study Guide, Chapter 4: Spectrum Analysis and Troubleshooting, page 117
• CWAP-404 Objectives, Section 4.1: Use spectrum analysis tools
• CWAP-404 Study Guide, Chapter 2: Protocol Analysis, page 33
• CWAP-404 Objectives, Section 2.2: Analyze field values

An AIFS is a variable interframe space introduced by 802.11e to help prioritize medium access for different Access Categories (ACs). An interframe space is a period of time that a STA (station) has to wait before attempting to access the medium. An AIFS is a type of interframe space that varies depending on the AC of the traffic. An AC is a logical queue that corresponds to a QoS (Quality of Service) level for different types of traffic. There are four ACs defined by 802.11e: AC_VO (Voice), AC_VI (Video), AC_BE (Best Effort), and AC_BK (Background). Each AC has a different AIFSN (Arbitration Interframe Space Number) value, which determines how long it has to wait before attempting to access the medium. A lower AIFSN value means a higher priority and a shorter waiting time. The other options are not correct, as they do not describe what an AIFS is. An AIFS is not a medium access method introduced by 802.11n, but never implemented, as it is part of the 802.11e standard and widely used in QoS-enabled WLANs. An AIFS is not a form of aggregation performed at the PHY layer based on 802.11e UP values interpreted from DSCP values, as aggregation is a technique that combines multiple frames into one larger frame to improve efficiency and throughput, not prioritization or medium access. An AIFS is not the shortest period of time a STA can sleep, as sleeping is a power saving mode that allows a STA to conserve battery power by periodically turning off its radio, not accessing the medium. References: [Wireless Analysis Professional Study Guide CWAP-404], Chapter 7: QoS Analysis, page 194-195

An 802.11 wireless adaptor is required for Wi-Fi integration in laptop-based spectrum analyzer software in addition to the spectrum analysis adapter. The spectrum analysis adapter is a hardware device that captures the RF signals in the wireless environment and sends them to the spectrum analyzer software for analysis and display. The 802.11 wireless adapter is a hardware device that connects the laptop to the wireless network and allows the spectrum analyzer software to correlate the RF data with the Wi-Fi data, such as SSID, channel, and BSSID. This enables the spectrum analyzer software to provide more context and insight into the spectrum activity and its impact on the Wi-Fi network. A firmware upgrade for the spectrum analysis adapter is not required for Wi-Fi integration, but it may be needed to fix bugs or add features to the device. A directional antenna is an antenna that focuses the RF energy in a specific direction and has a high gain and a narrow beamwidth. A directional antenna can be used with a spectrum analysis adapter to pinpoint the location or source of interference or noise in the wireless environment, but it is not required for Wi-Fi integration. SNMP read credentials to the WLAN controller or APs are not required for Wi-Fi integration, but they may be useful for obtaining additional information about the wireless network configuration and performance from the network devices.References:

• CWAP-404 Study Guide, Chapter 4: Spectrum Analysis and Troubleshooting, page 123
• CWAP-404 Objectives, Section 4.2: Integrate Wi-Fi data with spectrum analysis data
• CWAP-404 Study Guide, Chapter 4: Spectrum Analysis and Troubleshooting, page 131

The interframe space that would be expected between a CTS (Clear to Send) and a Data frame is SIFS (Short Interframe Space). A SIFS is the shortest interframe space that is used for high-priority transmissions, such as ACKs (Acknowledgements), CTSs, or data frames that are part of a fragmentation or aggregation process. A SIFS is a fixed value that depends on the PHY type and channel width. A CTS and a Data frame are part of a virtual carrier sense mechanism called RTS/CTS (Request to Send/Clear to Send), which is used to avoid collisions and hidden node problems in wireless transmissions. When a STA (station) wants to send a data frame, it first sends an RTS frame to the intended receiver, indicating the duration of the transmission. The receiver then responds with a CTS frame, also indicating the duration of the transmission. The other STAs in the vicinity hear either the RTS or the CTS frame and update their NAV (Network Allocation Vector) timers accordingly, deferring their access to the medium until the transmission is over. The sender then sends the data frame after waiting for a SIFS, followed by an ACK frame from the receiver after another SIFS. The other options are not correct, as they are not used between a CTS and a Data frame. A PIFS (PCF Interframe Space) is used for medium access by the PCF (Point Coordination Function), which is an optional and rarely implemented polling-based mechanism that provides contention-free service for time-sensitive traffic. An AIFS (Arbitration Interframe Space) is used for medium access by different ACs (Access Categories), which are logical queues that correspond to different QoS (Quality of Service) levels for different types of traffic. An AIFS is a variable interframe space that depends on the AIFSN (Arbitration Interframe Space Number) value of each AC. A DIFS (Distributed Interframe Space) is used for medium access by the DCF (Distributed Coordination Function), which is the default and mandatory contention-based mechanism that provides best-effort service for normal traffic. References: [Wireless Analysis Professional Study Guide CWAP-404], Chapter 6: 802.11 Frame Exchanges, page 166-167; Chapter 7: QoS Analysis, page 194-195

The function of the PHY preamble is to allow the receiver to detect and synchronize with the signal. The PHY preamble is a part of the PPDU that is transmitted before the PHY header and the PSDU. The PHY preamble consists of a series of training fields that help the receiver to adjust its parameters, such as frequency, timing, and gain, to match the incoming signal. The PHY preamble also helps the receiver to estimate the channel conditions and noise level. References: [Wireless Analysis Professional Study Guide CWAP-404], Chapter 4: 802.11 Physical Layer, page 99-100

The To DS and From DS flags should be set to 0 in an Association Response frame. An Association Response frame is a type of management frame that is transmitted by an AP to accept or reject an association request from a STA. The To DS (To Distribution System) and From DS (From Distribution System) flags are two bits in the Frame Control field of the MAC header that indicate whether a frame is destined for or originated from the DS (Distribution System), which is a system that connects multiple BSSs together. The To DS and From DS flags can have four possible combinations: 00, 01, 10, or 11. For an Association Response frame, which is sent from an AP to a STA within a BSS, both flags should be set to 0. References: [Wireless Analysis Professional Study Guide CWAP-404], Chapter 5: 802.11 MAC Sublayer, page 121-122

A Reassociation Request frame is sent every time a STA roams from one AP to another within the same ESS. A Reassociation Request frame is similar to an Association Request frame, but it also contains the BSSID of the current AP that the STA is leaving. This allows the new AP to coordinate with the old AP and transfer the STA’s context information, such as security keys, QoS parameters, and buffered frames. This way, the STA can maintain its connectivity and session continuity during roaming . References: CWAP-404 Certified Wireless Analysis Professional Study and Reference Guide, Chapter 6: MAC Sublayer Frame Exchanges, page 195;CWAP-404 Certified Wireless Analysis Professional Study and Reference Guide, Chapter 6: MAC Sublayer Frame Exchanges, page 196.

 The GTK (Group Temporal Key) is encrypted within the third message of the 4-Way Handshake. The 4-Way Handshake is a process that establishes a secure connection between a STA (station) and an AP (access point) using WPA2 (Wi-Fi Protected Access 2), which is a security protocol that uses AES-CCMP (Advanced Encryption Standard-Counter Mode CBC-MAC Protocol) as its encryption algorithm. The 4-Way Handshake consists of four messages that are exchanged between the STA and the AP. The first message is sent by the AP to the STA, containing the ANonce (Authenticator Nonce), which is a random number generated by the AP. The second message is sent by the STA to the AP, containing the SNonce (Supplicant Nonce), which is a random number generated by the STA, and the MIC (Message Integrity Code), which is a value that verifies the integrity of the message. The third message is sent by the AP to the STA, containing the GTK, which is a key that is used to encrypt and decrypt multicast and broadcast data frames, and the MIC. The GTK is encrypted with the KEK (Key Encryption Key), which is derived from the PTK (Pairwise Temporal Key). The PTK is a key that is used to encrypt and decrypt unicast data frames, and it is derived from the PMK (Pairwise Master Key), the ANonce, and the SNonce. The fourth message is sent by the STA to the AP, containing only the MIC, to confirm the completion of the 4-Way Handshake. The other options are not correct, asthey are not encrypted within the third message of the 4-Way Handshake. The PMK is a key that is derived from a passphrase or obtained from an authentication server, and it is not transmitted in any message of the 4-Way Handshake. The PTK is a key that is derived from the PMK, the ANonce, and the SNonce, and it is not transmitted in any message of the 4-Way Handshake. The GMK (Group Master Key) is a key that is generated by the AP and used to derive the GTK, and it is not transmitted in any message of the 4-Way Handshake. References: [Wireless Analysis Professional Study Guide CWAP-404], Chapter 8: Security Analysis, page 211-213

The value of the Listen Interval field in an Association Request frame indicates how often a STA in power save mode wakes up to listen to Beacon frames. The Listen Interval is expressed in units of Beacon Intervals (typically 100 TU or 102.4 ms). For example, if the Listen Interval is set to 10, it means that the STA will wake up every 10 Beacon Intervals (or about 1 second) to check for buffered frames at the AP. The Listen Interval is used by the AP to determine how long it can hold frames for a STA in power save mode before discarding them . References: CWAP-404 Certified Wireless Analysis Professional Study and Reference Guide, Chapter 6: MAC Sublayer Frame Exchanges, page 197; CWAP-404 Certified Wireless Analysis Professional Study and Reference Guide, Chapter 6: MAC Sublayer Frame Exchanges, page 198.