Free Cisco 300-515 Practice Exam with Questions & Answers | Set: 2

R1 operates using IPv4 and VPNv4 address families.

R1 operates on IPv6 only because the bgp default ipv4-unicast command is missing.

R1 establishes a VPNv4 eBGP relationship with neighbor 192.168.1.1.

R1 establishes an iBGP relationship with peer 192.168.1.1.

BB-PE-A and CC-PE-B

CC-PE-A and CC-PE-B

BB-PE-A and BB-PE-B

CC-PE-A and BB-PE-A

BB-PE-A and BB-P-A

CC-PE-A and CC-P-A

Disable spanning tree to allow loops to occur within the hub-and-spoke topology.

Disable split horizon to allow multiple VCs per spoke

Disable Cisco Discovery Protocol to allow MPLS to share labels between the designated spokes

Disable Cisco Discovery Protocol to allow for neighbor discovery

PE and CE routers must be running BGP as the PE-CE routing protocol

PE routers must have MPLS disabled and be running MP-BGP between all P and PE routers.

PE routers must be running MP-BGP and bgp default ipv4-unicast must be disabled

All PEs must have the same VRFs configured.

by converting CE routes into VPNv4 routes and exchanging them using MP-BGP

by establishing BGP neighbor relationships between all connected CEs to exchange routing information

by learning IPv4 routes from connected CEs and redistributing them into the global IGP

by converting CE routes into VPNv4 routes and exchanging them using the global IGP

In the ospfv3 1 area 1 ipv4 command, area 0 must be configured instead of area 1.

OSPFv3 does not run for IPv4 on FastEthemet0/0 until IPv6 routing is enabled on the router and IPv6 is enabled on interface Fastfc.thernet0/0

OSPFv3 cannot be configured for IPv4; OSPFv3 works only for IPv6.

IPv6 routing not enabled" is just an informational message and OSPFv3 runs for IPv4 on interface FastEthernet0/0 anyway

Devices on the network use MPLS labels to share VPN routes between P routers in the network.

Devices on the network use LSAs to share routes between P routers in the network.

Devices on the network use MPLS labels to move VPN traffic through the network.

Devices on the network use GRE tunnels to move traffic between VRFs.

the AS-Override feature

the DN bit with type 3, 5, or 7 LSA

the domain tag for type 2 LSA

sham links to create a super backbone over the service provider network

It configures VPWS multihomed.

It configures VPWS single homed.

It configures an IPv4 peering with 192.168.1.1

It configures MPLS traffic engineering.

VLAN name

Xconnect group name

EFP subinterface number

pseudowire ID

MTU size

control word usage