What is the default IEEE 802.1x AP authentication configuration on a Cisco Catalyst 9800 Series Wireless Controller?
A FlexConnect remote office deployment is using five 2702i APs indoors and two 1532i APs outdoors. When a code upgrade is performed and FlexConnect Smart AP Image Upgrade is leveraged, but no FlexConnect Master AP has been configured, how many image transfers between the WLC and APs will occur?
An engineer is defining a new Cisco AVC profile with different rules for HR and VIP users. Both user types connect to a single SSID and authenticate by using their Active Directory credentials via Cisco ISE. The engineer wants to apply the AVC profile dynamically to the user types.
Which Cisco AV pair attribute must be applied to Cisco ISE?
An engineer must implement VideoStream on a Cisco wireless network that uses a single-SSID deployment model. Which feature must be enabled on the Cisco Catalyst 9800 Series WLC?
Refer to the exhibit. A university network administrator notices that wireless guest users consume a significant amount of uplink internet bandwidth in the library, which causes throughput issues on staff SSID. To throttle this bandwidth use, the administrator intends to configure a QoS policy for guests that:
Which class-map configuration must the administrator implement?



On a branch office deployment, it has been noted that if the FlexConnect AP is in standalone mode and loses connection to the WLC, all clients are disconnected, and the SSID is no longer advertised. Considering that FlexConnect local switching is enabled, which setting is causing this behavior?
An employee with administrative privileges has a Cisco OEAP at home. The employee must add an SSID for personal devices.
Which two actions enable the employee to access the AP configuration? (Choose two.)
Where is a Cisco OEAP enabled on a Cisco Catalyst 9800 Series Wireless Controller?
An engineer must implement Cisco Identity-Based Networking Services at a remote site using ISE to dynamically assign groups of users to specific IP subnets. If the subnet assigned to a client is available at the remote site, then traffic must be offloaded locally, and subnets are unavailable at the remote site must be tunneled back to the WLC. Which feature meets these requirements?
A network engineer observes a spike in controller CPU overhead and overall network utilization after multicast is enabled on a controller with 500 APs. Which feature corrects the issue?
|
PDF + Testing Engine
|
|---|
|
$45 |
|
Testing Engine
|
|---|
|
$35 |
|
PDF (Q&A)
|
|---|
|
$30 |
Cisco Free Exams |
|---|
|