Free Checkpoint 156-315.82 Practice Exam with Questions & Answers | Set: 2

The correct answer isC. Check Point states that the VPN tunnel guaranteesAuthenticity,Privacy, andIntegrity. In standard security terminology, privacy maps toconfidentialitybecause all VPN data is encrypted. Integrity means the traffic is protected against unauthorized modification, and authenticity means the peers use standard authentication methods. Option A is wrong because “identity” is not the complete VPN guarantee set and omits integrity. Option B is wrong because availability is not one of the three VPN tunnel guarantees listed here. Option D is also wrong because it replaces authenticity with availability. The exact exam mapping is:Privacy = Confidentiality, so the answer becomesConfidentiality, Integrity, and Authenticity.

========

The correct answer isD. The command must use the R82 Management Server Migration Tool from the $FWDIR/scripts directory and must specify the target version asR82. The correct syntax is:

$FWDIR/scripts/migrate_server print_installed_tools -v R82

Option A is wrong because print_tools is not the correct operation name and the version is wrong. Option B is wrong because the tool path is $FWDIR/scripts, not $CPDIR/scripts, and it specifies R81.20 instead of R82. Option C uses the right operation name but the wrong version; R77.30 is not the target release in this scenario. Since Alice is importing an exportedR82Management Database, the installed migration tools must be verified forR82. Check Point’s R82 Installation and CLI guidance uses the migrate_server tool for R80.20-and-higher management migration workflows.

The correct answer isD. TheCompliance Bladeis designed to continuously evaluate the Check Point security infrastructure against best practices, regulatory standards, policies, Software Blade configuration, and gateway settings. Check Point documentation states that the Compliance Blade uses Continuous Compliance Monitoring technology to examine Security Gateways, Software Blades, policies, and configuration settings against an extensive database of security best practices, and it suggests corrective measures when deficiencies are found. SmartEvent is powerful for event correlation, investigation, and monitoring, but it is not the blade whose core function is best-practice compliance remediation. A generic Monitoring Blade is not the correct Check Point answer. VPN is a connectivity/encryption blade, not a compliance-remediation engine. Therefore, when the question asks which blade recommends corrective measures for security issues, the correct blade isCompliance. Reference topic:Compliance Blade / Continuous Compliance Monitoring.

========

The correct answer isD. In Gaia Clish, CPUSE Deployment Agent status is checked with the show installer status command family. The CPUSE Administration Guide documents show installer status < options > as the command that shows information about the CPUSE Deployment Agent, including status, build number, cloud connectivity, last update time, and license state. The most precise form for the agent state is show installer status agent, but among the provided choices,show installer statusis the correct command structure. Option A is not valid Gaia Clish syntax. Option B, show installer packages, lists packages, such as imported or installed packages, but it does not show the Deployment Agent status. Option C is not a valid command for checking CPUSE Deployment Agent status. For the exam, associate CPUSE/Deployment Agent operational checks with theinstallercommand namespace in Gaia Clish: show installer status agent, show installer status all, or the broader show installer status.

The correct answer isC. The R82 migrate_server export command supports optional flags for exporting logs. The -l parameter exports and imports Check Point logswithoutlog indexes, while the -x parameter exports and imports Check Point logswith their log indexesfrom $FWDIR/log/. Therefore, when the requirement is to export the Management Database with both logs and log indexes, the correct flag is -x. Option A is wrong because -n is not the parameter for including logs and indexes. Option B is wrong because it uses the older migrate utility and -l, which does not include log indexes. Option D has the correct -x idea but uses the wrong command/path for R82 migration from R80.20 and higher. The correct R82 command pattern is: ./migrate_server export -v R82 -x / < Full Path > / < ExportFileName > . Before using -x, log indexes must be closed and saved, which is why this option is heavier than a normal database-only export.

========

The correct answer isD. Central Deployment in SmartConsole is the recommended method for deploying Hotfixes, Jumbo Hotfix Accumulators, and upgrade packages to multiple Security Gateways and Cluster Members. The R82 Security Management Administration Guide states that administrators can select up to30 Security Gateways and Cluster Members, but installation can take place on only10 targets at the same time; targets above the tenth are placed in a queue and processed as earlier installations complete. This directly matches the scenario with 21 Security Gateways. Option A is wrong because the concurrency limit is not one target at a time. Option B is wrong because the administrator is not limited to selecting only 10 targets; the selection limit is higher, while the simultaneous installation limit is 10. Option C is flatly incorrect because Central Deployment is specifically designed for batch deployment from SmartConsole. For CCSE R82, memorize the operational rule:select up to 30, install on up to 10 concurrently, queue the rest. Reference topic:Central Deployment of Hotfixes and Version Upgrades.

========

The correct answer isC. In Check Point Management High Availability, policy and object changes are made through theActiveSecurity Management Server. If the Active server fails or is intentionally taken offline, a Standby server does not automatically assume the Active role. The administrator must manually initiate a changeover from SmartConsole so that a Standby server becomes Active. Check Point’s R82 Security Management documentation states that if the Primary Security Management Server fails or is offline for maintenance, the administrator can initiate a changeover so the Secondary server takes over. It also states that changeover between Active and Standby Management Servers isnot automatic. Option A is wrong because the Standby server is madeActive, not promoted to “Primary”; Primary and Secondary are installation roles. Option B is wrong because there is no automatic priority-based election. Option D is gateway-cluster-style thinking and does not apply to Management HA. Reference topic:Management High Availability / Changeover Between Active and Standby.

========

The correct answer isD. In a normal Management HA configuration, only one Management Server should be Active at a time, and the remaining Management Server or servers should be Standby. However, Check Point allows a situation where more than one server becomes Active, usually during a connectivity failure or a manual changeover scenario where the existing Active server cannot be contacted. Check Point explicitly calls this conditionCollision Mode. This is not a desired steady-state operating model and should not be confused with gateway ClusterXL Active/Active or Load Sharing. Option A is too absolute; while standard operation has one Active server, the product does support a collision condition. Option B is wrong because “Active-Active mode” is not the correct term for Management HA. Option C is not a Check Point Management HA term. In collision mode, the Active servers do not synchronize, and once one server is changed back to Standby, its data is overwritten by the remaining Active server. Reference topic:Working in Collision Mode.

========

The correct answer isB. ElasticXL Cluster supports a maximum ofthree ElasticXL Cluster Members per siteandsix ElasticXL Cluster Members total, which means up totwo sites. This design allows scaling within a site and supports a second site for availability, but it does not turn ElasticXL into an unlimited multi-site fabric. Option A is wrong because four nodes per site is unsupported. Option C is wrong because six nodes per site and three sites would exceed the documented platform limits. Option D is too restrictive because ElasticXL supports more than two total nodes and can support two sites. Check Point’s documentation also says that if more Security Group Members are required, administrators should use Maestro. That line is important because it draws the boundary between ElasticXL and larger scalable-platform deployments. Reference topic:ElasticXL Important Notes / Maximum members and site support.

========

The correct answer isB. Before importing a Management Database on a freshly installed target Security Management Server, the administrator must ensure that the required upgrade tools are present and compatible. The R82 migration workflow uses the migrate_server utility from $FWDIR/scripts in Expert mode. The valid command form tested here ismigrate_server print_installed_tools -v < target version > . Option A is not valid syntax because it invents print --installed-tools. Option C is also not the official command form. Option D is syntactically fabricated. The reason this matters is that Advanced Upgrade depends on the target system using the correct R82 migration tools before the database import is executed. If the target system lacks the correct tools, the import can fail or produce an unsupported migration state. For CCSE R82, the clean command memory is:Expert mode → $FWDIR/scripts → migrate_server print_installed_tools -v R82 before import validation/workflow. Reference topic:R82 Management Server Migration Tool / migrate_server workflow.

========