Free Checkpoint 156-315.81 Practice Exam with Questions & Answers | Set: 3

What two ordered layers make up the Access Control Policy Layer? Network and Application Control are the two ordered layers that make up the Access Control Policy Layer. The Network layer controls network access based on source, destination, service, time, etc. The Application Control layer controls application access based on users, groups, applications, content categories, etc. The Network layer is always processed before the Application Control layer. References: R81 Security Management Administration Guide, page 29.

Policy Types are the different types of security policies that can be configured and enforced on a Check Point gateway. The valid Policy Types in R81.X are:

• Access Control: Defines the rules for allowing or blocking traffic based on source, destination, service, user, and other criteria.
• IPS: Protects the network from known and unknown attacks by inspecting the traffic and applying signatures, protections, and actions.
• QoS: Controls the bandwidth allocation and prioritization for different types of traffic and applications.
• DLP: Prevents the leakage of sensitive data from the network by detecting and blocking data transfers that violate predefined rules.

The references are:

• Check Point Certified Security Expert R81.20 (CCSE) Core Training, slide 11
• Check Point Certified Security Administrator R81 - ExperTeach, page 5
• Check Point Cybersecurity BootCamp R81.20 – CCSA & CCSE Training, page 2

 According to out of the box SmartEvent policy, the blade that will automatically be correlated into events is IPS. IPS (Intrusion Prevention System) is a blade that detects and prevents network attacks by inspecting traffic and applying signatures and protections. SmartEvent correlates IPS logs into events based on predefined event definitions, such as IPS Attack, IPS Attack High Confidence, IPS Attack Critical Confidence, etc. The other blades are not automatically correlated into events by default, but they can be added to the SmartEvent policy manually. References: [SmartEvent Policy]

The SmartEvent component that is responsible to collect the logs from different Log Servers is the SmartEvent Correlation Unit. The SmartEvent Correlation Unit is a daemon that runs on the SmartEvent Server and receives logs from one or more Log Servers. The SmartEvent Correlation Unit analyzes the logs and generates correlated events according to the SmartEvent policy2. References: Check Point R81 SmartEvent Administration Guide

 The correct command for checking the Deployment Agent status over the GAIA CLISH is “show installer status”. This command displays information about the Deployment Agent such as its version, status, last update time, and last operation result. The other commands are either invalid or irrelevant for this purpose. References: [Check Point Security Expert R81 Installation and Upgrade Guide], page 23.

The Check Point Compliance Blade is a security management tool that monitors the compliance status of the Security Gateways and Security Management Servers with various regulatory standards1. The Compliance Blade supports the following regulatory standards2:

• GLBA: The Gramm-Leach-Bliley Act, also known as the Financial Services Modernization Act of 1999, is a US federal law that requires financial institutions to protect the privacy and security of their customers’ personal information.
• CJIS: The Criminal Justice Information Services Division, also known as CJIS, is a division of the US Federal Bureau of Investigation that provides criminal justice information services to law enforcement, national security, and intelligence agencies. CJIS has a set of security policies and requirements that govern the access, use, and protection of the CJIS data.
• NCIPA: The National Counterintelligence and Security Center Insider Threat Program Maturity Framework, also known as NCIPA, is a US government framework that provides guidance and best practices for establishing and enhancing insider threat programs within federal agencies. NCIPA defines five levels of maturity for insider threat programs, from initial to optimized.
• SOCI: This is not a valid option for a configurable Compliance Regulation. There is no such regulatory standard with this acronym. However, there is a similar acronym, SOC 2, which stands for Service Organization Control 2, which is a set of standards and criteria for auditing the security, availability, processing integrity, confidentiality, and privacy of service providers that store, process, or transmit customer data3.

Therefore, the correct answer is C, as SOCI is not a configurable Compliance Regulation.

References: 1: ATRG: Compliance Blade (R80.10 and higher) - Check Point Software 3 2: Check Point R81 - Check Point Software 1 3: SOC 2 Compliance Checklist: What You Need to Know - Varonis

https://resources.checkpoint.com/datasheet/certified-security-expert-ccse-r8120-course-overview

Dynamic log distribution is a feature that allows you to configure the Security Gateway to distribute logs between multiple active Log Servers to support a better rate of Logs and Log Servers redundancy. This means that each log is sent to only one Log Server and the load is balanced between the primary Log Servers. If all the primary Log Servers are disconnected, the logs are distributed between the backup Log Servers. If no Log Servers are connected, the gateway writes the logs locally. This feature improves the performance and reliability of logging and reduces the network traffic and disk space consumption. You can enable this feature on the SmartConsole -> Gateways & Servers -> Logs -> Dynamic Log Distribution1.

The other options are incorrect because they do not describe the dynamic log distribution feature. Option B is wrong because the Management High Availability does not store the logs dynamically on the member with the most available disk space, but rather synchronizes the logs between the members using the cpd process2. Option C is wrong because the dynamic log distribution feature does not synchronize the logs between the primary and secondary management server, but rather distributes the logs between the Log Servers. Option D is wrong because the dynamic log distribution feature does not save disk space in case of a firewall cluster, but rather distributes the logs between the Log Servers. The firewall cluster members do not store local logs, but rather send them to the Log Servers3.

The ports that are required to be open for SmartEvent are 19009, 18190, and 443. TCP port 19009 is used by the CPM process for management communication. TCP port 18190 is used by the CPD process for inter-process communication. TCP port 443 is used by the HTTPS protocol for secure web access. SmartEvent uses these ports to communicate with other components, such as SmartConsole, Security Management Server, Log Server, Correlation Unit, etc. References: [SmartEvent Ports]

 A clientless remote access VPN deployment is used to provide remote users with secure access to internal corporate resources by authenticating the user through an internet browser. A clientless remote access VPN does not require any software installation or configuration on the user’s device. Instead, it uses a web-based portal that acts as a proxy between the user and the corporate resources. The user can access web applications and services through the portal using a standard web browser that supports SSL/TLS encryption. The portal can also provide single sign-on (SSO) capabilities for SAML-enabled applications. A clientless remote access VPN is suitable for scenarios where users need to access mainly web-based resources from unmanaged devices or devices that cannot run VPN clients.

The other options are incorrect because:

• A client-based remote access VPN deployment is used to provide remote users with secure access to internal corporate resources by installing a VPN client software on the user’s device. A client-based remote access VPN requires software installation and configuration on the user’s device. It uses IPsec or SSL/TLS protocols to create a secure tunnel between the user’s device and the VPN gateway. The user can access any type of resource through the tunnel using any application that supports TCP/IP protocols. A client-based remote access VPN is suitable for scenarios where users need to access various types of resources from managed devices or devices that can run VPN clients.
• A clientless direct access deployment is not a valid term for a VPN deployment. Direct access is a feature of Windows Server that allows remote users to securely access internal corporate resources without using a VPN connection. Direct access uses IPv6 transition technologies and IPsec protocols to create a secure connection between the user’s device and the direct access server. The user can access any type of resource through the connection using any application that supports TCP/IP protocols. Direct access requires software installation and configuration on both the user’s device and the direct access server.
• A direct access deployment is not a term for a VPN deployment, but a feature of Windows Server that allows remote users to securely access internal corporate resources without using a VPN connection. Direct access uses IPv6 transition technologies and IPsec protocols to create a secure connection between the user’s device and the direct access server. The user can access any type of resource through the connection using any application that supports TCP/IP protocols. Direct access requires software installation and configuration on both the user’s device and the direct access server.

Running the command fw unloadlocal on the Security Management Server will remove the installed Security Policy from the local firewall module. This command is useful for troubleshooting purposes when there is a problem with the policy installation or enforcement. However, it will also expose the Security Management Server to potential attacks, so it should be used with caution. References: Training & Certification | Check Point Software, R81 CCSA & CCSE exams released featuring Promo for… - Check Point …

According to the Check Point website, GAiA Software update packages can be imported and installed offline in situation where the Security Gateway with GAiA does not have access to Internet. This allows you to manually download the packages from another device and transfer them to the Security Gateway using a USB drive or other media. The other situations are either not relevant or not possible. References: Offline Software Updates

 Log Consolidator is NOT a SmartEvent component. SmartEvent is a unified security event management solution that provides visibility, analysis, and reporting of security events across multiple Check Point products. SmartEvent consists of three main components: SmartEvent Server, Correlation Unit, and Log Server. SmartEvent Server is responsible for storing and displaying security events in SmartConsole and SmartEventWeb. Correlation Unit is responsible for collecting and correlating logs from various sources and generating security events based on predefined or custom scenarios. Log Server is responsible for receiving and indexing logs from Security Gateways and other Check Point modules. Log Consolidator is not a valid component or blade of SmartEvent.

 According to the Check Point R81 release notes, you can access the ThreatCloud Repository from R81.20 SmartConsole and Threat Prevention. The ThreatCloud Repository is a cloud-based service that provides real-time threat intelligence and updates to Check Point products. The other options are either outdated or nonexistent. References: Check Point R81

 In ClusterXL Load Sharing Multicast Mode, every member of the cluster receives all of the packets sent to the cluster IP address. This mode uses multicast MAC addresses to distribute packets to all cluster members. Each member decides whether to accept or reject the packet based on a load balancing algorithm. This mode provides better performance and scalability than Unicast mode, but requires a switch that supports multicast MAC addresses. 

The responsibility of SOLR process on R81.20 management server is to generate indexes of data written to the database. SOLR is an open source search platform that provides fast and scalable indexing and querying capabilities. SOLR is used by the R81.20 management server to index data such as logs, objects, policies, tasks, and events, and to enable quick and efficient searches on this data by SmartConsole and SmartView applications.