Free VMware 2V0-41.24 Practice Exam with Questions & Answers | Set: 2

Before enabling an L2VPN (Layer 2 VPN) in NSX, a Route-based IPSec VPN must be configured. Route-based VPNs create a secure tunnel over which Layer 2 traffic can be extended, allowing for the creation of L2VPN connections. This setup is required to establish the underlying secure connectivity that L2VPN relies on for traffic between sites.

According to the web search results, network segmentation is a feature of NSX that improves the security of today’s modern workloads by preventing lateral movement. Lateral movement is a technique used by attackers to move from one compromised system to another within a network, exploiting vulnerabilities or credentials . Network segmentation prevents lateral movement by dividing a network into smaller segments or zones, each with its own security policies and controls. This way, if one segment is compromised, the attacker cannot access other segments or resources . NSX enables network segmentation by using micro-segmentation, which applies granular firewall rules at the virtual machine level, regardless of the physical network topology .

To configure a firewall rule based on the domain name of a specific application, the administrator needs to use the Profile field in a distributed firewall rule. The Profile field allows the administrator to select a context profile that contains one or more attributes for filtering traffic. One of the attributes that can be used is Domain (FQDN) Name, which specifies the fully qualified domain name of the application. For example, if the administrator wants to filter traffic to *.office365.com, they can create a context profile with the Domain (FQDN) Name attribute set to *.office365.com and use it in the Profile field of the firewall rule.

References:

Filtering Specific Domains (FQDN/URLs)

FQDN Filtering

In NSX and VMware environments, an alarm in a suppressed state can typically be set to remain suppressed for a specific duration measured in hours. This allows administrators to temporarily ignore the alarm for a set period while working on a resolution without continuous alerts.

A Service interface on the Tier-0 Gateway is required to make NSX Edge Services, such as NAT or load balancing, available to a VM on a VLAN-backed logical switch. The Service interface allows the Tier-0 Gateway to connect directly to the VLAN-backed network, enabling Edge Services to interact with VMs on that network.

The correct answer is to enable the OSPF toggle and to add an Area Definition for the Tier-0 gateway in the image. These two items are required to configure OSPF on the Tier-0 gateway, as explained in the web search results123.

To mark your answers by clicking twice on the image, you can double-click on the toggle switch next to OSPF to turn it on. The switch should change from gray to blue, indicating that the option is enabled. Then, you can double-click on the Set button next to Area Definition to add an area definition. A pop-up window should appear where you can specify the area ID and type. 

1. Click the OSPF toggle to enable OSPF 2. In the Area Definition field, click Set to add an area definition https://docs.vmware.com/en/VMware-NSX-T-Data-Center/3.2/administration/GUID-5BEC626C-5312-467D-B873-8E117349E9FC.html

When a stateful service (such as NAT or firewall) is enabled for the first time on a Tier-0 Gateway, the Service Router (SR) is instantiated on the NSX Edge node and automatically connected with the Distributed Router (DR). This connection enables the Tier-0 Gateway to handle stateful services by routing traffic through the SR, which manages stateful packet processing, while the DR provides distributed routing functionality.

AS-Path Prepend: This attribute allows you to prepend one or more AS numbers to the AS path of a route, making it appear longer and less preferable to other BGP routers. You can use this attribute to manipulate the inbound traffic from your BGP peers by advertising a longer AS path for some routes and a shorter AS path for others.

MED: This attribute stands for Multi-Exit Discriminator and allows you to specify a preference value for a route among multiple exit points from an AS. You can use this attribute to manipulate the outbound traffic to your BGP peers by advertising a lower MED value for some routes and a higher MED value for others.

The VLANs used in VRF Lite are configured on the uplink interface of the VRF gateway, which enables traffic segmentation and routing within the VRF context.

The uplink trunk segment is where multiple VLANs can be configured and tagged, allowing them to be used by the VRF Lite setup for routing and segmentation across the network.

esxcfg-nics -l: This command lists all physical NICs on the ESXi host along with their link status, allowing you to check if any vmnic link status is down.

esxcli network nic list: This command provides a list of network interfaces with their details, including link status, making it useful for verifying if the link status of a vmnic is down.