Free VMware 2V0-11.25 Practice Exam with Questions & Answers | Set: 2

Questions 11

An organization is implementing a downtime avoidance solution and wants to ensure continuous availability of applications across separate sites that are connected via a high bandwidth/low latency link.

Which two VMware Cloud Foundation components support this capability with stretched clusters? (Choose two.)

Options:

vSAN

vSphere

NSX Firewall

vVOL

vSphere Replication

VMware 2V0-11.25 Premium Access

Questions 12

A Cloud Administrator has been tasked with verifying all of the prerequisites are in place prior to deploying VMware Aria Suite Lifecycle. The following information has been provided for the Aria Suite Lifecycle implementation: hostname: lcm domain: vcf.company.com

IP address: 10.0.0.150 /24 -

IP gateway: 10.0.0.1 -

Which three items must the Cloud Administrator ensure are available prior to deploying VMware Aria Suite Lifecycle? (Choose three.)

Options:

Connectivity between Application Virtual Networks, Management Network, and network services (DNS and NTP)

A DNS A Record for lcm.vcf.company.com that points to 10.0.0.150

The IP address for the Standalone Tier 1 Load Balancer for VMware Aria components is prepared

A DNS PTR Record for 10.0.0.1 that points to lcm.vcf.company.com

A CA-signed SSL certificate for Aria Suite Lifecycle added to SDDC Manager

Questions 13

What option should be selected when placing a vSAN host into maintenance mode to ensure that all data remains accessible throughout the maintenance process while also minimizing the duration of the operation?

Options:

Ensure Data Accessibility

Ensure Accessibility

Full Data Migration

No Data Migration

Questions 14

An administrator is tasked with deploying a new VMware Cloud Foundation (VCF) instance. The management domain is designed to be created with three virtual distributed switches (VDS) configured as follows:

VDS1 - used for management and vMotion traffic

VDS2 - used for vSAN traffic

VDS3 - used for NSX Overlay traffic

What action would the administrator take to deploy the designed configuration?

Options:

A JSON file must be prepared with the defined configuration and used to run the bring-up process.

vSphere Distributed Switch Profile 2 must be selected in the VCF Deployment parameter workbook.

The design must be changed to ensure vSAN and NSX overlay traffic are on the same VDS.

The ESXi hosts have to be configured with twelve physical NICs to ensure redundancy.

Questions 15

An administrator is unable to log in to the SDDC Manager UI on their local workstation. After entering the correct URL, the login page does not load and the administrator is unable to enter their credentials in order to view the SDDC Manager inventory. They confirm that the SDDC Manager appliance responds to a ping command from their local workstation against both its FQDN and IP address.

After checking the VM console of the SDDC Manager appliance in the management vCenter UI, they determine that the operating system is online and they can log in to it with the relevant administrator level accounts.

What two actions could the administrator take whilst logged in to the SDDC Manager VM via the VM console to help identify the root cause of the UI not loading? (Choose two.)

Options:

Verify that port 80 is open and listening for connections using the command netstat.

Perform a restart of the network adapter using the command systemctl restart.

Verify the health of the SDDC Manager services using the command sos --get-vcf-services-summary.

Perform a restart of the services using the command systemctl restart.

Verify that there is free disk space remaining using the command df -h.

Questions 16

While deploying a new VMware Cloud Foundation environment, a cloud administrator validates the information entered into the Deployment Parameter Workbook. The validation action results in an error and the VMware Cloud Builder GUI error message does not identify the cause.

Which logfile can the administrator use to identify the cause of the validation error?

Options:

VMware SDDC Manager appliance - vcf-deployment-debug.log

VMware Cloud Builder appliance - vcf-bringup-debug.log

VMware SDDC Manager appliance - vcf-bringup-debug.log

VMware Cloud Builder appliance - vcf-deployment-debug.log

Questions 17

What are three prerequisites for deploying an NSX Edge cluster in a VMware Cloud Foundation (VCF) solution? (Choose three.)

Options:

Set up vSAN storage policies for the Edge VMs.

Verify that the NSX host overlay VLAN and NSX Edge overlay VLAN are routed to each other.

Create DNS entries for the NSX Edge nodes.

Use separate VLAN IDs and subnets for the NSX host overlay and NSX Edge overlay networks.

Configure BGP as a dynamic routing protocol on the physical switches.

Install Aria Operations and enable Edge Cluster monitoring.

Answer:

B, C, D

Explanation:

Comprehensive and Detailed Explanation From Exact Extract:

According to the VMware Cloud Foundation 5.2 Planning and Preparation Guide and the VMware NSX-T Data Center Installation Guide, the following are critical prerequisites before deploying an NSX Edge cluster in a VCF environment:

B. Verify that the NSX host overlay VLAN and NSX Edge overlay VLAN are routed to each other.

Exact Extract:

“The NSX host overlay network and the NSX Edge overlay network must be able to route traffic between each other to allow tunnel establishment and VM-to-edge connectivity.”

(VMware NSX-T Data Center Installation Guide, VMware Cloud Foundation Planning and Preparation Guide)

C. Create DNS entries for the NSX Edge nodes.

Exact Extract:

“You must create forward and reverse DNS records for each NSX Edge node before deployment. DNS resolution is required for NSX Manager and general network functionality.”

(VMware Cloud Foundation Planning and Preparation Guide)

D. Use separate VLAN IDs and subnets for the NSX host overlay and NSX Edge overlay networks.

Exact Extract:

“The NSX host overlay and the NSX Edge overlay must be on different VLANs and subnets to ensure proper logical separation and traffic flow within the NSX infrastructure.”

(VMware NSX-T Data Center Installation Guide, VMware Cloud Foundation Planning and Preparation Guide)

Why Not the Other Options?

A: vSAN storage policies for Edge VMs are not a documented prerequisite for Edge deployment.

E: BGP configuration is required at a later stage for north-south routing, but not as a deployment prerequisite.

F: Aria Operations is optional and used for monitoring, not a deployment prerequisite.

Summary:

Before deploying an NSX Edge cluster in a VCF environment, you must:

Ensure routing between NSX host and Edge overlay VLANs (B),

Create DNS entries for the NSX Edge nodes (C),

Use separate VLAN IDs and subnets for host and Edge overlays (D).

These prerequisites are confirmed in the official VMware Cloud Foundation and NSX documentation.

Questions 18

An organization requires a private cloud with robust availability and disaster recovery capabilities.

Which three VMware Cloud Foundation components should be considered for integration to meet these requirements? (Choose three.)

Options:

NSX for secure and isolated networking.

Aria Operations for Logs for enhanced logging and monitoring.

VMware Live Site Recovery (VLSR) for orchestrated disaster recovery.

vSphere Replication for VM-level data replication.

vSAN for hyper-converged storage and downtime avoidance.

Questions 19

An administrator needs to configure Network IO Control (NIOC) on a Virtual Distributed Switch (VDS) to prioritize storage traffic over other types of traffic.

Which two steps should be followed? (Choose two.)

Options:

Disable all other traffic types to ensure storage traffic gets full bandwidth.

Navigate to the VDS settings in the vSphere Client and enable NIOC.

Migrate all VM traffic to a standard switch.

Create a new port group specifically for storage traffic.

Assign shares and limits to the new port group to prioritize the storage traffic.

Questions 20

Which feature of VMware Lifecycle Manager allows an administrator to manage the lifecycle of ESXi hosts by applying a consistent image across the hosts in a cluster? (Choose three.)

Options:

Configure a Key Management Server (KMS) and add it to vCenter

Create an encryption policy in vCenter.

Enable SSH on the ESXi hosts to manage encryption keys.

Enable the encryption feature on the ESXi hosts.

Apply the encryption policy to the existing VMs.